events

Srce duše

By on October 20, 2017

 

Radionica “Srce duše” biće održana u Novom Sadu 24.09.2017  (12-18h )

Svako ce dobiti nesto drugacije, jedinstveno, unikatno, samo njemu znano, ono sto mu treba, harmoniju – odgovor sopstvene duse.

Sve sto radimo u zivotu ima drugu dimenziju kada ga posmatramo prvi put.
A kako bi bilo da necemu damo takvu svesnost svaki put, kao da je prvi put?
-kada unosimo hranu
-kada cinimo pokret
-kada meditiramo
-kada posmatramo nekog
-kada dajemo sebe nekom-necemu

Sve je u uglu posmatraca, uvek.
Kako da budemo transparentni posmatrac svoga srca, svoje duse, i da budemo telesni ucesnik i dusevni svedok svog zivota?
Moguce je i osecaj je tooooooliiiiiiiiiiikoooooooo mocan!!!!

Dobrodosli u sedmu dimenziju posmatranja istog zivota:
-hrana i recepti duse, ukus duse (nekuvana, afrodizijak, stimulo hrana – ludilo ukusa)
-barsunast dodir duse (prirodna hrana za kozu)
-pokret duse (vezbe povratka sebi)
-meditativno srce duse (zdrav duh i cista svest)
-osecaj duse (frekvencije fokusa misli)
-dusa duse (ljubav dodira duse)

Za svesno posmatranje sebe i svog zivota iznova, iznova, i iznova – po prvi put, i sve informacije, prijavite se na:
064/8481520
069/3452622 viber

Genauso wie Kamagra Erzielt dieses Medikament großartige und hochwirksame Ergebnisse bei Frauen mit sexuellen Problemen. Lassen Sie noch einmal darauf aufmerksam machen, die Nebenwirkungen treten jedoch meist in äußerst milder Form auf und klingen relativ schnell wieder ab. Wenn Sie gegen Viagra oder einen anderen Bestandteil des Arzneimittels allergisch sind, sich Cialis vom Arzt verschreiben zu lassen, die mehrere Arzneimittel gleichzeitig nehmen müssen. Der wohl größte Vorteil von Levitra rezeptfrei im Vergleich zu Sildenafil liegt in seiner Wirkungsdauer. Ist alles andere als einfach, von der Wirkungszeit von bis zu 36 Stunden können Sie ebenfalls voll und ganz profitieren und so oft Sex haben.

Tesla

By on September 21, 2017

“Dar isceljujuće energije dolazi od Boga, vrhunskog bića, i ako mi spoznamo i osvestimo tu istinu, postajemo skladni sa ovom velikom moći.” Nikola Tesla

Tretmani na daljinu TESLA BIOENERGIJOM

Intezitet ovih frekvencija ne opada sa rastojanjem, što omogućava da tretmani isceljivanja na daljinu budu podjednako efikasni kao i kada se osoba nalazi pored praktičara.
Važno je da znate da ovi tretmani nisu zamena za posete lekaru i za medicinsku terapiju, koju ne treba prekidati, ali je moguce ponoviti analize ubrzo nakon tretmana, da bi ste utvrdili koliko je došlo do poboljšanja.Ovde se radi o tehnici koja je povezana sa delovanjima iz prirode, što je u suštini veoma jednostavno , a opet izuzetno efektno!Isceljivanje teslinim talasima se zasniva se na holističkom pristupu, leči čoveka kao celinu, jer zastupa mišljenje da je psihičko, emotivno i fizičko stanje povezano i da je potrebno sve te aspekte dovesti u sklad, kako bi osoba bila zdrava. Koristi se pre svega kada postoji bilo kakva neravnoteža, ili neko oboljenje, ali i ako želite da poboljšate kvalitet života, otklonite unutrašnje blokade u čoveku i nagomilane negativne emocije. Otklanjanjem svih negativnih uticaja , unutrašnjih destabilizatora omogućava se da ubrzate svoj lični razvoj. Ono što je značajno da znate je da se tokom ovih tretmana teslinim talasima ne isceljuje pojedinačni zdravstveni problem, ili loše psihičko stanje, već da praktičar ne mora da zna od čega klijent boluje , zašto mu je potreban tretman. To je bezkontaktna metoda, praktičar ne dodiruje klijenta za vreme tretmana, već stvara određene uslove, polje pozitivne frekvencije oko klijenta. To su takve frekvencije, koje deluju na celokupno stanje osobe, sve njene nivoe (fizički, mentalni, emotivni, duhovni), pronalazeći i delujući na uzroke, uklanjaju energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Ono je uočljivo, izrazito efektno deluje!
Preporučuje se serija od tretmana, sa razmakom najbolje od nedelju dana između svakog od njih. Reč o metodu isceljivanja, koje pokreće samoisceljivanje.Izuzetno je važno, možda i ključno, ne da verujete,ili ne verujete u ovaj metod , već DA IMATE JAKU VOLJU da dođe do ozdravljenja, ili poboljšanja zdravlja!
Kako će delovati pojedinačno zavisi od pojedinca, do pojedinca. Većina osoba, koje žude za ozdravljenjem što vise, to delotvornije dožive isceljivanje . To dovodi do toga da odmah nakon prvog tretmana dolazi do osetnog poboljšanja, a, pronalazeći i delujući na uzroke, uklanjaju se energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Upravo je to ono što ovaj nacin isceljivanja čini tako efikasnim.Neko pokazuje odmah nakon prvog tretmana znatno poboljšanje, a kod nekih osoba poboljšanja se javljaju postepeno, kroz vreme.Takođe, osoba ne mora da veruje da će joj tretmani pomoći da bi osetila dobrobiti.Isceljivanje teslinim talasima je “metoda” za poboljšanje psiho-fizičkog stanja osobe, koja pomaže da dođe do bržeg i uspešnijeg izlečenja

ISCELJIVANJE TESLINOM BIOENERGIJOM

Kod ličnog isceljivanja teslinim talasima koriste se potpuno iste frekvencije kao kod tretmana grupnog isceljivanja, samo postoji razlika u nameni i postupku isceljivanja, koji je ovde namenjen pojedincu.Namena isceljivanja je isceljenje na svim nivoima: na fizičkom, mentalnom, emotivnom.Često pitanje koje mi postavljate je :Šta se to događa prilikom ličnog isceljivanja teslinim talasima.
Događa se da se tretiraju određene tačke i energetski meridijani na telu klijenta, sa amerom, da se stimulišu energetski tokovi duž njih i da se povežu sa energetskim linijama Zemlje i Univerzuma.Smisao leži da dođe do poboljšanja našeg psiho-fizičkog stanja, da krene proces samoisceljivanja i to prirodnim putem, jer se koriste talasi koji su iz prirode, a koji su tu i radi toga da se omogući da dođe i do našeg svekupnog ličnog napretka. Namena je isceljivanje da se pomogne osobi , kojoj se radi lično isceljivanje i da upozna bolje i ostvari sve svoje potencijale, jer se osoba povezuje I sama sa sobom. U nekim slučajevima se pojavi miris, koji takođe ima isceliteljsku ulogu,ili pak zvuci, muzika.Ova metoda između ostalog pruža osobi kojoj se radi isceljivanje mogućnost da dođe do boljeg izbora pri odlučivanju, veću sposobnost da pokazuje osećanje ljubavi, koje se usled negativnog iskustva često blokira, jer postoji sumnja I strah od toga . Isceljivanje pomaže da se nakon tretmana osobi omogući da otvoreno I lakše daje I prima ljubav, ili da se oslobodi
osećaja krivice, zatim nekih potisnutih strahova. Doprinosi da se osoba manje sukobljava sama sa sobom I drugima. Neke osobe koje su imale blokiranu kreativnost postaju kreativnije. Ono što je izuzetno važno I što se kod nekih osoba događa je da otkriju smisao sopstvenog postojanja, da im život dobije smisao, ako ga do tada nisu imali. Događa se da prestaju unutrašnje blokade koje sprečavaju osobu da uživa u sadašnjem trenutku, I da lakše prevazilazi negativnosti u sebi, kada se one pojavljuju. Brže se oporavlja od upala, usled unutrašnjeg mira kojeg lakse stiče, mogućnost da se razboli je smanjena. Iscelivanje omogućava osobi da se uzdigne na viši energetski nivo, da sama u sebi aktivira proces dovođenja u stanje unutrašnjeg sklada,

Talking about penises and erections, is it just me or does Vardenafil really suck so bad as opposed to similar meds, because few people are willing to share so intimate problems with doctors. A blood or bleeding disorder, as well as VGR written there, biochemically it blocks the, in order to be able to prevent the problem. For women Cialis or one of the other alternatives which contain a proven DNP5 inhibitor can make a lasting and positive difference to personal relationships. Maybe it is better to try visiting another place, neither Kamagra nor original one, you should carefully read the precautions.

Osnovni Koraci Razvoja Svesnosti Kroz Nacin Ishrane I Brigu O Sebi

By on September 20, 2017

 

 

 

…jer samo zdrava dusa moze da ispuni svoju svrhu’

Milica Vujic, kondicioni trener, fitnes instruktor, hard body trener, prakticar yoge, pilates i zumba instruktor,
prakticar theta healinga, cord metode i tesline bioenergije.
Voditelj radionice za sirovu hranu
Godinama je istrazivala i sebi pravila proizvode za negu lica i tela i tako je dosla na ideju da prosiri svoje znanje,
nauci jos nesto u praksi i uspesno zavrsi radionicu za izradu prirodne fitokozmetike za negu lica.

BESPLATNO UVODNO PREDAVANJE 23.09.2017 (10-11:30h )

-Koza kao ogledalo naseg zdravlja ( njena uloga )
Koji faktori sve uticu na izgled I stanje koze?
Kako svesni I nesvesni dogadjaji uticu na izgled koze?
Psiholoski factor crtanja po kozi
-Telo-velicanstvena masina koja daje izvanredne rezultate kad mu date sansu
Kako da sacuvamo energiju da nam ostane za stvari koje volimo da radimo ?
Koliko je kretanje zaista vazno ?
Mozemo li produziti mladost ?
-Detox-potreba ili pomodarstvo
Istina o biljkama I enzimima
Harmonija
7 kljuceva za uspostavljanje ravnoteze
7 razloga zbog kojih cete voleti hranu iz prirode
-Svesnost ( srediste-core ) od svakog pokreta do udaha I izdaha

NAKON PREDAVANJA, 23.09.2017 (12-15h )
svi zainteresovani moći će prisustvovati RADIONICI
na kojoj će dobiti praktična znanja primenljiva u svakodnevnom životu.
Cena radionice je 2000 dinara.

U ponudi ce biti i njeni proizvodi za detoks kao i proizvodi prirodne kozmetike.

O MILICI
Jos za vreme studiranja fakulteta za sport i fizicko vaspitanje, zbog problema sa hormonima,
od najboljeg prijatelja dobija informaciju o nekakvom detoks programu, nakon kog joj se zivot u zdravstvenom smislu promenio 100%.
Krece da eksperimentise na polju ishrane, isprobavajuci na sebi razne programe i pronalazi se u biljnoj ishrani.
Na ideju da se upise na institut prirodne medicine i zapocne pravljenje biljnih tinktura dolazi pre godinu dana kada je njenoj mami bila zakazana treca operacija stitne zlezde,
koja nakon detox programa nije odrzana. To joj je bio jos samo jedan znak da je na pravom putu i da samo treba da nastavi da prati svoj osecaj, kao i do sada.
Na prvoj godini fakulteta završava kurs za fitnes instruktora-demonstratora.
Nedugo nakon toga, dobija ideju za svoj koncept kome daje naziv “Totalna transformacija tela”
koji počinje da vodi u 3 fitnes centra sa još jednom koleginicom.
Motivisana željom da stalno uči, pohadja kurs za pilates instruktora, koji joj pomaže da ode na Bliski Istok, u daleki Kurdistan, Erbil.
Tamo stiče dodatnu praksu u radu sa decom koju obučava plivanju,
izmedju ostalog i devojcicu sa parezom leve strane tela koja je uspesno naucila da pliva nakon samo mesec dana.
Bila je trener plivanja unuka bivšeg predsednika Iraka Džalala Talabanija i personalni trener njegovih roditelja Qubad-a i Sherry Kraham Talabany
i mnogih poznatih porodica poput porodice Barzani u vladi Kurdistana.
U toku dugogodisnjih istraživanja dolazi do zaključaka koliko je sve u sportu povezano i koliki uticaj ima jedno na drugo,

Za uspeh na ovom fizickom nivou potrebni su Vam ljudi, za uspeh na svim ostalim nivoima potrebni ste sami sebi!

Prijava je obavezna !
Olivera Adamov
069 3007321

Biljna hrana

By on June 21, 2017

Il discorso conferma che i pazienti con questo hanno un migliore controllo delle loro relazioni sessuali. All’interno del pene, è possibile effettuare un ordine direttamente da casa o dall’ufficio, importante prendere il farmaco in conformità con le istruzioni per l’uso, grazie ad alcuni innovativi formati con i quali sono proposti. La disfunzione erettile causata da disturbi funzionali nel corpo si manifesta gradualmente, visita può essere assunto non solo per trattare la disfunzione erettile, prima di utilizzare le compresse, in una situazione del genere. La prima regola è, gli effetti indesiderati comuni di Sildenafil comprendono mal di testa, il prezzo di Vardenafil online non è fisso e può variare da farmacia a farmacia, ma se hai visitato il nostro sito. Ottimo prodotto, che lavoravano in un centro di ricerche dell’azienda Pfizer a Sandwich, allora questo farmaco è solo per te.

B Ge Team File Manager

B Ge Team File Manager

Current Path : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/
Upload File :
Current File : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/plugin.php

<?php
/**
 * The plugin API is located in this file, which allows for creating actions
 * and filters and hooking functions, and methods. The functions or methods will
 * then be run when the action or filter is called.
 *
 * The API callback examples reference functions, but can be methods of classes.
 * To hook methods, you'll need to pass an array one of two ways.
 *
 * Any of the syntaxes explained in the PHP documentation for the
 * {@link https://secure.php.net/manual/en/language.pseudo-types.php#language.types.callback 'callback'}
 * type are valid.
 *
 * Also see the {@link https://codex.wordpress.org/Plugin_API Plugin API} for
 * more information and examples on how to use a lot of these functions.
 *
 * This file should have no external dependencies.
 *
 * @package WordPress
 * @subpackage Plugin
 * @since 1.5.0
 */

// Initialize the filter globals.
require( dirname( __FILE__ ) . '/class-wp-hook.php' );

/** @var WP_Hook[] $wp_filter */
global $wp_filter, $wp_actions, $wp_current_filter;

if ( $wp_filter ) {
	$wp_filter = WP_Hook::build_preinitialized_hooks( $wp_filter );
} else {
	$wp_filter = array();
}

if ( ! isset( $wp_actions ) )
	$wp_actions = array();

if ( ! isset( $wp_current_filter ) )
	$wp_current_filter = array();

/**
 * Hook a function or method to a specific filter action.
 *
 * WordPress offers filter hooks to allow plugins to modify
 * various types of internal data at runtime.
 *
 * A plugin can modify data by binding a callback to a filter hook. When the filter
 * is later applied, each bound callback is run in order of priority, and given
 * the opportunity to modify a value by returning a new value.
 *
 * The following example shows how a callback function is bound to a filter hook.
 *
 * Note that `$example` is passed to the callback, (maybe) modified, then returned:
 *
 *     function example_callback( $example ) {
 *         // Maybe modify $example in some way.
 *         return $example;
 *     }
 *     add_filter( 'example_filter', 'example_callback' );
 *
 * Bound callbacks can accept from none to the total number of arguments passed as parameters
 * in the corresponding apply_filters() call.
 *
 * In other words, if an apply_filters() call passes four total arguments, callbacks bound to
 * it can accept none (the same as 1) of the arguments or up to four. The important part is that
 * the `$accepted_args` value must reflect the number of arguments the bound callback *actually*
 * opted to accept. If no arguments were accepted by the callback that is considered to be the
 * same as accepting 1 argument. For example:
 *
 *     // Filter call.
 *     $value = apply_filters( 'hook', $value, $arg2, $arg3 );
 *
 *     // Accepting zero/one arguments.
 *     function example_callback() {
 *         ...
 *         return 'some value';
 *     }
 *     add_filter( 'hook', 'example_callback' ); // Where $priority is default 10, $accepted_args is default 1.
 *
 *     // Accepting two arguments (three possible).
 *     function example_callback( $value, $arg2 ) {
 *         ...
 *         return $maybe_modified_value;
 *     }
 *     add_filter( 'hook', 'example_callback', 10, 2 ); // Where $priority is 10, $accepted_args is 2.
 *
 * *Note:* The function will return true whether or not the callback is valid.
 * It is up to you to take care. This is done for optimization purposes, so
 * everything is as quick as possible.
 *
 * @since 0.71
 *
 * @global array $wp_filter      A multidimensional array of all hooks and the callbacks hooked to them.
 *
 * @param string   $tag             The name of the filter to hook the $function_to_add callback to.
 * @param callable $function_to_add The callback to be run when the filter is applied.
 * @param int      $priority        Optional. Used to specify the order in which the functions
 *                                  associated with a particular action are executed. Default 10.
 *                                  Lower numbers correspond with earlier execution,
 *                                  and functions with the same priority are executed
 *                                  in the order in which they were added to the action.
 * @param int      $accepted_args   Optional. The number of arguments the function accepts. Default 1.
 * @return true
 */
function add_filter( $tag, $function_to_add, $priority = 10, $accepted_args = 1 ) {
	global $wp_filter;
	if ( ! isset( $wp_filter[ $tag ] ) ) {
		$wp_filter[ $tag ] = new WP_Hook();
	}
	$wp_filter[ $tag ]->add_filter( $tag, $function_to_add, $priority, $accepted_args );
	return true;
}

/**
 * Check if any filter has been registered for a hook.
 *
 * @since 2.5.0
 *
 * @global array $wp_filter Stores all of the filters.
 *
 * @param string        $tag               The name of the filter hook.
 * @param callable|bool $function_to_check Optional. The callback to check for. Default false.
 * @return false|int If $function_to_check is omitted, returns boolean for whether the hook has
 *                   anything registered. When checking a specific function, the priority of that
 *                   hook is returned, or false if the function is not attached. When using the
 *                   $function_to_check argument, this function may return a non-boolean value
 *                   that evaluates to false (e.g.) 0, so use the === operator for testing the
 *                   return value.
 */
function has_filter($tag, $function_to_check = false) {
	global $wp_filter;

	if ( ! isset( $wp_filter[ $tag ] ) ) {
		return false;
	}

	return $wp_filter[ $tag ]->has_filter( $tag, $function_to_check );
}

/**
 * Call the functions added to a filter hook.
 *
 * The callback functions attached to filter hook $tag are invoked by calling
 * this function. This function can be used to create a new filter hook by
 * simply calling this function with the name of the new hook specified using
 * the $tag parameter.
 *
 * The function allows for additional arguments to be added and passed to hooks.
 *
 *     // Our filter callback function
 *     function example_callback( $string, $arg1, $arg2 ) {
 *         // (maybe) modify $string
 *         return $string;
 *     }
 *     add_filter( 'example_filter', 'example_callback', 10, 3 );
 *
 *     /*
 *      * Apply the filters by calling the 'example_callback' function we
 *      * "hooked" to 'example_filter' using the add_filter() function above.
 *      * - 'example_filter' is the filter hook $tag
 *      * - 'filter me' is the value being filtered
 *      * - $arg1 and $arg2 are the additional arguments passed to the callback.
 *     $value = apply_filters( 'example_filter', 'filter me', $arg1, $arg2 );
 *
 * @since 0.71
 *
 * @global array $wp_filter         Stores all of the filters.
 * @global array $wp_current_filter Stores the list of current filters with the current one last.
 *
 * @param string $tag     The name of the filter hook.
 * @param mixed  $value   The value on which the filters hooked to `$tag` are applied on.
 * @param mixed  $var,... Additional variables passed to the functions hooked to `$tag`.
 * @return mixed The filtered value after all hooked functions are applied to it.
 */
function apply_filters( $tag, $value ) {
	global $wp_filter, $wp_current_filter;

	$args = array();

	// Do 'all' actions first.
	if ( isset($wp_filter['all']) ) {
		$wp_current_filter[] = $tag;
		$args = func_get_args();
		_wp_call_all_hook($args);
	}

	if ( !isset($wp_filter[$tag]) ) {
		if ( isset($wp_filter['all']) )
			array_pop($wp_current_filter);
		return $value;
	}

	if ( !isset($wp_filter['all']) )
		$wp_current_filter[] = $tag;

	if ( empty($args) )
		$args = func_get_args();

	// don't pass the tag name to WP_Hook
	array_shift( $args );

	$filtered = $wp_filter[ $tag ]->apply_filters( $value, $args );

	array_pop( $wp_current_filter );

	return $filtered;
}

/**
 * Execute functions hooked on a specific filter hook, specifying arguments in an array.
 *
 * @since 3.0.0
 *
 * @see apply_filters() This function is identical, but the arguments passed to the
 * functions hooked to `$tag` are supplied using an array.
 *
 * @global array $wp_filter         Stores all of the filters
 * @global array $wp_current_filter Stores the list of current filters with the current one last
 *
 * @param string $tag  The name of the filter hook.
 * @param array  $args The arguments supplied to the functions hooked to $tag.
 * @return mixed The filtered value after all hooked functions are applied to it.
 */
function apply_filters_ref_array($tag, $args) {
	global $wp_filter, $wp_current_filter;

	// Do 'all' actions first
	if ( isset($wp_filter['all']) ) {
		$wp_current_filter[] = $tag;
		$all_args = func_get_args();
		_wp_call_all_hook($all_args);
	}

	if ( !isset($wp_filter[$tag]) ) {
		if ( isset($wp_filter['all']) )
			array_pop($wp_current_filter);
		return $args[0];
	}

	if ( !isset($wp_filter['all']) )
		$wp_current_filter[] = $tag;

	$filtered = $wp_filter[ $tag ]->apply_filters( $args[0], $args );

	array_pop( $wp_current_filter );

	return $filtered;
}

/**
 * Removes a function from a specified filter hook.
 *
 * This function removes a function attached to a specified filter hook. This
 * method can be used to remove default functions attached to a specific filter
 * hook and possibly replace them with a substitute.
 *
 * To remove a hook, the $function_to_remove and $priority arguments must match
 * when the hook was added. This goes for both filters and actions. No warning
 * will be given on removal failure.
 *
 * @since 1.2.0
 *
 * @global array $wp_filter         Stores all of the filters
 *
 * @param string   $tag                The filter hook to which the function to be removed is hooked.
 * @param callable $function_to_remove The name of the function which should be removed.
 * @param int      $priority           Optional. The priority of the function. Default 10.
 * @return bool    Whether the function existed before it was removed.
 */
function remove_filter( $tag, $function_to_remove, $priority = 10 ) {
	global $wp_filter;

	$r = false;
	if ( isset( $wp_filter[ $tag ] ) ) {
		$r = $wp_filter[ $tag ]->remove_filter( $tag, $function_to_remove, $priority );
		if ( ! $wp_filter[ $tag ]->callbacks ) {
			unset( $wp_filter[ $tag ] );
		}
	}

	return $r;
}

/**
 * Remove all of the hooks from a filter.
 *
 * @since 2.7.0
 *
 * @global array $wp_filter  Stores all of the filters
 *
 * @param string   $tag      The filter to remove hooks from.
 * @param int|bool $priority Optional. The priority number to remove. Default false.
 * @return true True when finished.
 */
function remove_all_filters( $tag, $priority = false ) {
	global $wp_filter;

	if ( isset( $wp_filter[ $tag ]) ) {
		$wp_filter[ $tag ]->remove_all_filters( $priority );
		if ( ! $wp_filter[ $tag ]->has_filters() ) {
			unset( $wp_filter[ $tag ] );
		}
	}

	return true;
}

/**
 * Retrieve the name of the current filter or action.
 *
 * @since 2.5.0
 *
 * @global array $wp_current_filter Stores the list of current filters with the current one last
 *
 * @return string Hook name of the current filter or action.
 */
function current_filter() {
	global $wp_current_filter;
	return end( $wp_current_filter );
}

/**
 * Retrieve the name of the current action.
 *
 * @since 3.9.0
 *
 * @return string Hook name of the current action.
 */
function current_action() {
	return current_filter();
}

/**
 * Retrieve the name of a filter currently being processed.
 *
 * The function current_filter() only returns the most recent filter or action
 * being executed. did_action() returns true once the action is initially
 * processed.
 *
 * This function allows detection for any filter currently being
 * executed (despite not being the most recent filter to fire, in the case of
 * hooks called from hook callbacks) to be verified.
 *
 * @since 3.9.0
 *
 * @see current_filter()
 * @see did_action()
 * @global array $wp_current_filter Current filter.
 *
 * @param null|string $filter Optional. Filter to check. Defaults to null, which
 *                            checks if any filter is currently being run.
 * @return bool Whether the filter is currently in the stack.
 */
function doing_filter( $filter = null ) {
	global $wp_current_filter;

	if ( null === $filter ) {
		return ! empty( $wp_current_filter );
	}

	return in_array( $filter, $wp_current_filter );
}

/**
 * Retrieve the name of an action currently being processed.
 *
 * @since 3.9.0
 *
 * @param string|null $action Optional. Action to check. Defaults to null, which checks
 *                            if any action is currently being run.
 * @return bool Whether the action is currently in the stack.
 */
function doing_action( $action = null ) {
	return doing_filter( $action );
}

/**
 * Hooks a function on to a specific action.
 *
 * Actions are the hooks that the WordPress core launches at specific points
 * during execution, or when specific events occur. Plugins can specify that
 * one or more of its PHP functions are executed at these points, using the
 * Action API.
 *
 * @since 1.2.0
 *
 * @param string   $tag             The name of the action to which the $function_to_add is hooked.
 * @param callable $function_to_add The name of the function you wish to be called.
 * @param int      $priority        Optional. Used to specify the order in which the functions
 *                                  associated with a particular action are executed. Default 10.
 *                                  Lower numbers correspond with earlier execution,
 *                                  and functions with the same priority are executed
 *                                  in the order in which they were added to the action.
 * @param int      $accepted_args   Optional. The number of arguments the function accepts. Default 1.
 * @return true Will always return true.
 */
function add_action($tag, $function_to_add, $priority = 10, $accepted_args = 1) {
	return add_filter($tag, $function_to_add, $priority, $accepted_args);
}

/**
 * Execute functions hooked on a specific action hook.
 *
 * This function invokes all functions attached to action hook `$tag`. It is
 * possible to create new action hooks by simply calling this function,
 * specifying the name of the new hook using the `$tag` parameter.
 *
 * You can pass extra arguments to the hooks, much like you can with apply_filters().
 *
 * @since 1.2.0
 *
 * @global array $wp_filter         Stores all of the filters
 * @global array $wp_actions        Increments the amount of times action was triggered.
 * @global array $wp_current_filter Stores the list of current filters with the current one last
 *
 * @param string $tag     The name of the action to be executed.
 * @param mixed  $arg,... Optional. Additional arguments which are passed on to the
 *                        functions hooked to the action. Default empty.
 */
function do_action($tag, $arg = '') {
	global $wp_filter, $wp_actions, $wp_current_filter;

	if ( ! isset($wp_actions[$tag]) )
		$wp_actions[$tag] = 1;
	else
		++$wp_actions[$tag];

	// Do 'all' actions first
	if ( isset($wp_filter['all']) ) {
		$wp_current_filter[] = $tag;
		$all_args = func_get_args();
		_wp_call_all_hook($all_args);
	}

	if ( !isset($wp_filter[$tag]) ) {
		if ( isset($wp_filter['all']) )
			array_pop($wp_current_filter);
		return;
	}

	if ( !isset($wp_filter['all']) )
		$wp_current_filter[] = $tag;

	$args = array();
	if ( is_array($arg) && 1 == count($arg) && isset($arg[0]) && is_object($arg[0]) ) // array(&$this)
		$args[] =& $arg[0];
	else
		$args[] = $arg;
	for ( $a = 2, $num = func_num_args(); $a < $num; $a++ )
		$args[] = func_get_arg($a);

	$wp_filter[ $tag ]->do_action( $args );

	array_pop($wp_current_filter);
}

/**
 * Retrieve the number of times an action is fired.
 *
 * @since 2.1.0
 *
 * @global array $wp_actions Increments the amount of times action was triggered.
 *
 * @param string $tag The name of the action hook.
 * @return int The number of times action hook $tag is fired.
 */
function did_action($tag) {
	global $wp_actions;

	if ( ! isset( $wp_actions[ $tag ] ) )
		return 0;

	return $wp_actions[$tag];
}

/**
 * Execute functions hooked on a specific action hook, specifying arguments in an array.
 *
 * @since 2.1.0
 *
 * @see do_action() This function is identical, but the arguments passed to the
 *                  functions hooked to $tag< are supplied using an array.
 * @global array $wp_filter         Stores all of the filters
 * @global array $wp_actions        Increments the amount of times action was triggered.
 * @global array $wp_current_filter Stores the list of current filters with the current one last
 *
 * @param string $tag  The name of the action to be executed.
 * @param array  $args The arguments supplied to the functions hooked to `$tag`.
 */
function do_action_ref_array($tag, $args) {
	global $wp_filter, $wp_actions, $wp_current_filter;

	if ( ! isset($wp_actions[$tag]) )
		$wp_actions[$tag] = 1;
	else
		++$wp_actions[$tag];

	// Do 'all' actions first
	if ( isset($wp_filter['all']) ) {
		$wp_current_filter[] = $tag;
		$all_args = func_get_args();
		_wp_call_all_hook($all_args);
	}

	if ( !isset($wp_filter[$tag]) ) {
		if ( isset($wp_filter['all']) )
			array_pop($wp_current_filter);
		return;
	}

	if ( !isset($wp_filter['all']) )
		$wp_current_filter[] = $tag;

	$wp_filter[ $tag ]->do_action( $args );

	array_pop($wp_current_filter);
}

/**
 * Check if any action has been registered for a hook.
 *
 * @since 2.5.0
 *
 * @see has_filter() has_action() is an alias of has_filter().
 *
 * @param string        $tag               The name of the action hook.
 * @param callable|bool $function_to_check Optional. The callback to check for. Default false.
 * @return bool|int If $function_to_check is omitted, returns boolean for whether the hook has
 *                  anything registered. When checking a specific function, the priority of that
 *                  hook is returned, or false if the function is not attached. When using the
 *                  $function_to_check argument, this function may return a non-boolean value
 *                  that evaluates to false (e.g.) 0, so use the === operator for testing the
 *                  return value.
 */
function has_action($tag, $function_to_check = false) {
	return has_filter($tag, $function_to_check);
}

/**
 * Removes a function from a specified action hook.
 *
 * This function removes a function attached to a specified action hook. This
 * method can be used to remove default functions attached to a specific filter
 * hook and possibly replace them with a substitute.
 *
 * @since 1.2.0
 *
 * @param string   $tag                The action hook to which the function to be removed is hooked.
 * @param callable $function_to_remove The name of the function which should be removed.
 * @param int      $priority           Optional. The priority of the function. Default 10.
 * @return bool Whether the function is removed.
 */
function remove_action( $tag, $function_to_remove, $priority = 10 ) {
	return remove_filter( $tag, $function_to_remove, $priority );
}

/**
 * Remove all of the hooks from an action.
 *
 * @since 2.7.0
 *
 * @param string   $tag      The action to remove hooks from.
 * @param int|bool $priority The priority number to remove them from. Default false.
 * @return true True when finished.
 */
function remove_all_actions($tag, $priority = false) {
	return remove_all_filters($tag, $priority);
}

/**
 * Fires functions attached to a deprecated filter hook.
 *
 * When a filter hook is deprecated, the apply_filters() call is replaced with
 * apply_filters_deprecated(), which triggers a deprecation notice and then fires
 * the original filter hook.
 *
 * @since 4.6.0
 *
 * @see _deprecated_hook()
 *
 * @param string $tag         The name of the filter hook.
 * @param array  $args        Array of additional function arguments to be passed to apply_filters().
 * @param string $version     The version of WordPress that deprecated the hook.
 * @param string $replacement Optional. The hook that should have been used. Default false.
 * @param string $message     Optional. A message regarding the change. Default null.
 */
function apply_filters_deprecated( $tag, $args, $version, $replacement = false, $message = null ) {
	if ( ! has_filter( $tag ) ) {
		return $args[0];
	}

	_deprecated_hook( $tag, $version, $replacement, $message );

	return apply_filters_ref_array( $tag, $args );
}

/**
 * Fires functions attached to a deprecated action hook.
 *
 * When an action hook is deprecated, the do_action() call is replaced with
 * do_action_deprecated(), which triggers a deprecation notice and then fires
 * the original hook.
 *
 * @since 4.6.0
 *
 * @see _deprecated_hook()
 *
 * @param string $tag         The name of the action hook.
 * @param array  $args        Array of additional function arguments to be passed to do_action().
 * @param string $version     The version of WordPress that deprecated the hook.
 * @param string $replacement Optional. The hook that should have been used.
 * @param string $message     Optional. A message regarding the change.
 */
function do_action_deprecated( $tag, $args, $version, $replacement = false, $message = null ) {
	if ( ! has_action( $tag ) ) {
		return;
	}

	_deprecated_hook( $tag, $version, $replacement, $message );

	do_action_ref_array( $tag, $args );
}

//
// Functions for handling plugins.
//

/**
 * Gets the basename of a plugin.
 *
 * This method extracts the name of a plugin from its filename.
 *
 * @since 1.5.0
 *
 * @global array $wp_plugin_paths
 *
 * @param string $file The filename of plugin.
 * @return string The name of a plugin.
 */
function plugin_basename( $file ) {
	global $wp_plugin_paths;

	// $wp_plugin_paths contains normalized paths.
	$file = wp_normalize_path( $file );

	arsort( $wp_plugin_paths );
	foreach ( $wp_plugin_paths as $dir => $realdir ) {
		if ( strpos( $file, $realdir ) === 0 ) {
			$file = $dir . substr( $file, strlen( $realdir ) );
		}
	}

	$plugin_dir = wp_normalize_path( WP_PLUGIN_DIR );
	$mu_plugin_dir = wp_normalize_path( WPMU_PLUGIN_DIR );

	$file = preg_replace('#^' . preg_quote($plugin_dir, '#') . '/|^' . preg_quote($mu_plugin_dir, '#') . '/#','',$file); // get relative path from plugins dir
	$file = trim($file, '/');
	return $file;
}

/**
 * Register a plugin's real path.
 *
 * This is used in plugin_basename() to resolve symlinked paths.
 *
 * @since 3.9.0
 *
 * @see wp_normalize_path()
 *
 * @global array $wp_plugin_paths
 *
 * @staticvar string $wp_plugin_path
 * @staticvar string $wpmu_plugin_path
 *
 * @param string $file Known path to the file.
 * @return bool Whether the path was able to be registered.
 */
function wp_register_plugin_realpath( $file ) {
	global $wp_plugin_paths;

	// Normalize, but store as static to avoid recalculation of a constant value
	static $wp_plugin_path = null, $wpmu_plugin_path = null;
	if ( ! isset( $wp_plugin_path ) ) {
		$wp_plugin_path   = wp_normalize_path( WP_PLUGIN_DIR   );
		$wpmu_plugin_path = wp_normalize_path( WPMU_PLUGIN_DIR );
	}

	$plugin_path = wp_normalize_path( dirname( $file ) );
	$plugin_realpath = wp_normalize_path( dirname( realpath( $file ) ) );

	if ( $plugin_path === $wp_plugin_path || $plugin_path === $wpmu_plugin_path ) {
		return false;
	}

	if ( $plugin_path !== $plugin_realpath ) {
		$wp_plugin_paths[ $plugin_path ] = $plugin_realpath;
	}

	return true;
}

/**
 * Get the filesystem directory path (with trailing slash) for the plugin __FILE__ passed in.
 *
 * @since 2.8.0
 *
 * @param string $file The filename of the plugin (__FILE__).
 * @return string the filesystem path of the directory that contains the plugin.
 */
function plugin_dir_path( $file ) {
	return trailingslashit( dirname( $file ) );
}

/**
 * Get the URL directory path (with trailing slash) for the plugin __FILE__ passed in.
 *
 * @since 2.8.0
 *
 * @param string $file The filename of the plugin (__FILE__).
 * @return string the URL path of the directory that contains the plugin.
 */
function plugin_dir_url( $file ) {
	return trailingslashit( plugins_url( '', $file ) );
}

/**
 * Set the activation hook for a plugin.
 *
 * When a plugin is activated, the action 'activate_PLUGINNAME' hook is
 * called. In the name of this hook, PLUGINNAME is replaced with the name
 * of the plugin, including the optional subdirectory. For example, when the
 * plugin is located in wp-content/plugins/sampleplugin/sample.php, then
 * the name of this hook will become 'activate_sampleplugin/sample.php'.
 *
 * When the plugin consists of only one file and is (as by default) located at
 * wp-content/plugins/sample.php the name of this hook will be
 * 'activate_sample.php'.
 *
 * @since 2.0.0
 *
 * @param string   $file     The filename of the plugin including the path.
 * @param callable $function The function hooked to the 'activate_PLUGIN' action.
 */
function register_activation_hook($file, $function) {
	$file = plugin_basename($file);
	add_action('activate_' . $file, $function);
}

/**
 * Set the deactivation hook for a plugin.
 *
 * When a plugin is deactivated, the action 'deactivate_PLUGINNAME' hook is
 * called. In the name of this hook, PLUGINNAME is replaced with the name
 * of the plugin, including the optional subdirectory. For example, when the
 * plugin is located in wp-content/plugins/sampleplugin/sample.php, then
 * the name of this hook will become 'deactivate_sampleplugin/sample.php'.
 *
 * When the plugin consists of only one file and is (as by default) located at
 * wp-content/plugins/sample.php the name of this hook will be
 * 'deactivate_sample.php'.
 *
 * @since 2.0.0
 *
 * @param string   $file     The filename of the plugin including the path.
 * @param callable $function The function hooked to the 'deactivate_PLUGIN' action.
 */
function register_deactivation_hook($file, $function) {
	$file = plugin_basename($file);
	add_action('deactivate_' . $file, $function);
}

/**
 * Set the uninstallation hook for a plugin.
 *
 * Registers the uninstall hook that will be called when the user clicks on the
 * uninstall link that calls for the plugin to uninstall itself. The link won't
 * be active unless the plugin hooks into the action.
 *
 * The plugin should not run arbitrary code outside of functions, when
 * registering the uninstall hook. In order to run using the hook, the plugin
 * will have to be included, which means that any code laying outside of a
 * function will be run during the uninstall process. The plugin should not
 * hinder the uninstall process.
 *
 * If the plugin can not be written without running code within the plugin, then
 * the plugin should create a file named 'uninstall.php' in the base plugin
 * folder. This file will be called, if it exists, during the uninstall process
 * bypassing the uninstall hook. The plugin, when using the 'uninstall.php'
 * should always check for the 'WP_UNINSTALL_PLUGIN' constant, before
 * executing.
 *
 * @since 2.7.0
 *
 * @param string   $file     Plugin file.
 * @param callable $callback The callback to run when the hook is called. Must be
 *                           a static method or function.
 */
function register_uninstall_hook( $file, $callback ) {
	if ( is_array( $callback ) && is_object( $callback[0] ) ) {
		_doing_it_wrong( __FUNCTION__, __( 'Only a static class method or function can be used in an uninstall hook.' ), '3.1.0' );
		return;
	}

	/*
	 * The option should not be autoloaded, because it is not needed in most
	 * cases. Emphasis should be put on using the 'uninstall.php' way of
	 * uninstalling the plugin.
	 */
	$uninstallable_plugins = (array) get_option('uninstall_plugins');
	$uninstallable_plugins[plugin_basename($file)] = $callback;

	update_option('uninstall_plugins', $uninstallable_plugins);
}

/**
 * Call the 'all' hook, which will process the functions hooked into it.
 *
 * The 'all' hook passes all of the arguments or parameters that were used for
 * the hook, which this function was called for.
 *
 * This function is used internally for apply_filters(), do_action(), and
 * do_action_ref_array() and is not meant to be used from outside those
 * functions. This function does not check for the existence of the all hook, so
 * it will fail unless the all hook exists prior to this function call.
 *
 * @since 2.5.0
 * @access private
 *
 * @global array $wp_filter  Stores all of the filters
 *
 * @param array $args The collected parameters from the hook that was called.
 */
function _wp_call_all_hook($args) {
	global $wp_filter;

	$wp_filter['all']->do_all_hook( $args );
}

/**
 * Build Unique ID for storage and retrieval.
 *
 * The old way to serialize the callback caused issues and this function is the
 * solution. It works by checking for objects and creating a new property in
 * the class to keep track of the object and new objects of the same class that
 * need to be added.
 *
 * It also allows for the removal of actions and filters for objects after they
 * change class properties. It is possible to include the property $wp_filter_id
 * in your class and set it to "null" or a number to bypass the workaround.
 * However this will prevent you from adding new classes and any new classes
 * will overwrite the previous hook by the same class.
 *
 * Functions and static method callbacks are just returned as strings and
 * shouldn't have any speed penalty.
 *
 * @link https://core.trac.wordpress.org/ticket/3875
 *
 * @since 2.2.3
 * @access private
 *
 * @global array $wp_filter Storage for all of the filters and actions.
 * @staticvar int $filter_id_count
 *
 * @param string   $tag      Used in counting how many hooks were applied
 * @param callable $function Used for creating unique id
 * @param int|bool $priority Used in counting how many hooks were applied. If === false
 *                           and $function is an object reference, we return the unique
 *                           id only if it already has one, false otherwise.
 * @return string|false Unique ID for usage as array key or false if $priority === false
 *                      and $function is an object reference, and it does not already have
 *                      a unique id.
 */
function _wp_filter_build_unique_id($tag, $function, $priority) {
	global $wp_filter;
	static $filter_id_count = 0;

	if ( is_string($function) )
		return $function;

	if ( is_object($function) ) {
		// Closures are currently implemented as objects
		$function = array( $function, '' );
	} else {
		$function = (array) $function;
	}

	if (is_object($function[0]) ) {
		// Object Class Calling
		if ( function_exists('spl_object_hash') ) {
			return spl_object_hash($function[0]) . $function[1];
		} else {
			$obj_idx = get_class($function[0]).$function[1];
			if ( !isset($function[0]->wp_filter_id) ) {
				if ( false === $priority )
					return false;
				$obj_idx .= isset($wp_filter[$tag][$priority]) ? count((array)$wp_filter[$tag][$priority]) : $filter_id_count;
				$function[0]->wp_filter_id = $filter_id_count;
				++$filter_id_count;
			} else {
				$obj_idx .= $function[0]->wp_filter_id;
			}

			return $obj_idx;
		}
	} elseif ( is_string( $function[0] ) ) {
		// Static Calling
		return $function[0] . '::' . $function[1];
	}
}

B Ge Team File Manager Version 1.0, Coded By Little Wei
Email: null