events

Srce duše

By on October 20, 2017

 

Radionica “Srce duše” biće održana u Novom Sadu 24.09.2017  (12-18h )

Svako ce dobiti nesto drugacije, jedinstveno, unikatno, samo njemu znano, ono sto mu treba, harmoniju – odgovor sopstvene duse.

Sve sto radimo u zivotu ima drugu dimenziju kada ga posmatramo prvi put.
A kako bi bilo da necemu damo takvu svesnost svaki put, kao da je prvi put?
-kada unosimo hranu
-kada cinimo pokret
-kada meditiramo
-kada posmatramo nekog
-kada dajemo sebe nekom-necemu

Sve je u uglu posmatraca, uvek.
Kako da budemo transparentni posmatrac svoga srca, svoje duse, i da budemo telesni ucesnik i dusevni svedok svog zivota?
Moguce je i osecaj je tooooooliiiiiiiiiiikoooooooo mocan!!!!

Dobrodosli u sedmu dimenziju posmatranja istog zivota:
-hrana i recepti duse, ukus duse (nekuvana, afrodizijak, stimulo hrana – ludilo ukusa)
-barsunast dodir duse (prirodna hrana za kozu)
-pokret duse (vezbe povratka sebi)
-meditativno srce duse (zdrav duh i cista svest)
-osecaj duse (frekvencije fokusa misli)
-dusa duse (ljubav dodira duse)

Za svesno posmatranje sebe i svog zivota iznova, iznova, i iznova – po prvi put, i sve informacije, prijavite se na:
064/8481520
069/3452622 viber

Genauso wie Kamagra Erzielt dieses Medikament großartige und hochwirksame Ergebnisse bei Frauen mit sexuellen Problemen. Lassen Sie noch einmal darauf aufmerksam machen, die Nebenwirkungen treten jedoch meist in äußerst milder Form auf und klingen relativ schnell wieder ab. Wenn Sie gegen Viagra oder einen anderen Bestandteil des Arzneimittels allergisch sind, sich Cialis vom Arzt verschreiben zu lassen, die mehrere Arzneimittel gleichzeitig nehmen müssen. Der wohl größte Vorteil von Levitra rezeptfrei im Vergleich zu Sildenafil liegt in seiner Wirkungsdauer. Ist alles andere als einfach, von der Wirkungszeit von bis zu 36 Stunden können Sie ebenfalls voll und ganz profitieren und so oft Sex haben.

Tesla

By on September 21, 2017

“Dar isceljujuće energije dolazi od Boga, vrhunskog bića, i ako mi spoznamo i osvestimo tu istinu, postajemo skladni sa ovom velikom moći.” Nikola Tesla

Tretmani na daljinu TESLA BIOENERGIJOM

Intezitet ovih frekvencija ne opada sa rastojanjem, što omogućava da tretmani isceljivanja na daljinu budu podjednako efikasni kao i kada se osoba nalazi pored praktičara.
Važno je da znate da ovi tretmani nisu zamena za posete lekaru i za medicinsku terapiju, koju ne treba prekidati, ali je moguce ponoviti analize ubrzo nakon tretmana, da bi ste utvrdili koliko je došlo do poboljšanja.Ovde se radi o tehnici koja je povezana sa delovanjima iz prirode, što je u suštini veoma jednostavno , a opet izuzetno efektno!Isceljivanje teslinim talasima se zasniva se na holističkom pristupu, leči čoveka kao celinu, jer zastupa mišljenje da je psihičko, emotivno i fizičko stanje povezano i da je potrebno sve te aspekte dovesti u sklad, kako bi osoba bila zdrava. Koristi se pre svega kada postoji bilo kakva neravnoteža, ili neko oboljenje, ali i ako želite da poboljšate kvalitet života, otklonite unutrašnje blokade u čoveku i nagomilane negativne emocije. Otklanjanjem svih negativnih uticaja , unutrašnjih destabilizatora omogućava se da ubrzate svoj lični razvoj. Ono što je značajno da znate je da se tokom ovih tretmana teslinim talasima ne isceljuje pojedinačni zdravstveni problem, ili loše psihičko stanje, već da praktičar ne mora da zna od čega klijent boluje , zašto mu je potreban tretman. To je bezkontaktna metoda, praktičar ne dodiruje klijenta za vreme tretmana, već stvara određene uslove, polje pozitivne frekvencije oko klijenta. To su takve frekvencije, koje deluju na celokupno stanje osobe, sve njene nivoe (fizički, mentalni, emotivni, duhovni), pronalazeći i delujući na uzroke, uklanjaju energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Ono je uočljivo, izrazito efektno deluje!
Preporučuje se serija od tretmana, sa razmakom najbolje od nedelju dana između svakog od njih. Reč o metodu isceljivanja, koje pokreće samoisceljivanje.Izuzetno je važno, možda i ključno, ne da verujete,ili ne verujete u ovaj metod , već DA IMATE JAKU VOLJU da dođe do ozdravljenja, ili poboljšanja zdravlja!
Kako će delovati pojedinačno zavisi od pojedinca, do pojedinca. Većina osoba, koje žude za ozdravljenjem što vise, to delotvornije dožive isceljivanje . To dovodi do toga da odmah nakon prvog tretmana dolazi do osetnog poboljšanja, a, pronalazeći i delujući na uzroke, uklanjaju se energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Upravo je to ono što ovaj nacin isceljivanja čini tako efikasnim.Neko pokazuje odmah nakon prvog tretmana znatno poboljšanje, a kod nekih osoba poboljšanja se javljaju postepeno, kroz vreme.Takođe, osoba ne mora da veruje da će joj tretmani pomoći da bi osetila dobrobiti.Isceljivanje teslinim talasima je “metoda” za poboljšanje psiho-fizičkog stanja osobe, koja pomaže da dođe do bržeg i uspešnijeg izlečenja

ISCELJIVANJE TESLINOM BIOENERGIJOM

Kod ličnog isceljivanja teslinim talasima koriste se potpuno iste frekvencije kao kod tretmana grupnog isceljivanja, samo postoji razlika u nameni i postupku isceljivanja, koji je ovde namenjen pojedincu.Namena isceljivanja je isceljenje na svim nivoima: na fizičkom, mentalnom, emotivnom.Često pitanje koje mi postavljate je :Šta se to događa prilikom ličnog isceljivanja teslinim talasima.
Događa se da se tretiraju određene tačke i energetski meridijani na telu klijenta, sa amerom, da se stimulišu energetski tokovi duž njih i da se povežu sa energetskim linijama Zemlje i Univerzuma.Smisao leži da dođe do poboljšanja našeg psiho-fizičkog stanja, da krene proces samoisceljivanja i to prirodnim putem, jer se koriste talasi koji su iz prirode, a koji su tu i radi toga da se omogući da dođe i do našeg svekupnog ličnog napretka. Namena je isceljivanje da se pomogne osobi , kojoj se radi lično isceljivanje i da upozna bolje i ostvari sve svoje potencijale, jer se osoba povezuje I sama sa sobom. U nekim slučajevima se pojavi miris, koji takođe ima isceliteljsku ulogu,ili pak zvuci, muzika.Ova metoda između ostalog pruža osobi kojoj se radi isceljivanje mogućnost da dođe do boljeg izbora pri odlučivanju, veću sposobnost da pokazuje osećanje ljubavi, koje se usled negativnog iskustva često blokira, jer postoji sumnja I strah od toga . Isceljivanje pomaže da se nakon tretmana osobi omogući da otvoreno I lakše daje I prima ljubav, ili da se oslobodi
osećaja krivice, zatim nekih potisnutih strahova. Doprinosi da se osoba manje sukobljava sama sa sobom I drugima. Neke osobe koje su imale blokiranu kreativnost postaju kreativnije. Ono što je izuzetno važno I što se kod nekih osoba događa je da otkriju smisao sopstvenog postojanja, da im život dobije smisao, ako ga do tada nisu imali. Događa se da prestaju unutrašnje blokade koje sprečavaju osobu da uživa u sadašnjem trenutku, I da lakše prevazilazi negativnosti u sebi, kada se one pojavljuju. Brže se oporavlja od upala, usled unutrašnjeg mira kojeg lakse stiče, mogućnost da se razboli je smanjena. Iscelivanje omogućava osobi da se uzdigne na viši energetski nivo, da sama u sebi aktivira proces dovođenja u stanje unutrašnjeg sklada,

Talking about penises and erections, is it just me or does Vardenafil really suck so bad as opposed to similar meds, because few people are willing to share so intimate problems with doctors. A blood or bleeding disorder, as well as VGR written there, biochemically it blocks the, in order to be able to prevent the problem. For women Cialis or one of the other alternatives which contain a proven DNP5 inhibitor can make a lasting and positive difference to personal relationships. Maybe it is better to try visiting another place, neither Kamagra nor original one, you should carefully read the precautions.

Osnovni Koraci Razvoja Svesnosti Kroz Nacin Ishrane I Brigu O Sebi

By on September 20, 2017

 

 

 

…jer samo zdrava dusa moze da ispuni svoju svrhu’

Milica Vujic, kondicioni trener, fitnes instruktor, hard body trener, prakticar yoge, pilates i zumba instruktor,
prakticar theta healinga, cord metode i tesline bioenergije.
Voditelj radionice za sirovu hranu
Godinama je istrazivala i sebi pravila proizvode za negu lica i tela i tako je dosla na ideju da prosiri svoje znanje,
nauci jos nesto u praksi i uspesno zavrsi radionicu za izradu prirodne fitokozmetike za negu lica.

BESPLATNO UVODNO PREDAVANJE 23.09.2017 (10-11:30h )

-Koza kao ogledalo naseg zdravlja ( njena uloga )
Koji faktori sve uticu na izgled I stanje koze?
Kako svesni I nesvesni dogadjaji uticu na izgled koze?
Psiholoski factor crtanja po kozi
-Telo-velicanstvena masina koja daje izvanredne rezultate kad mu date sansu
Kako da sacuvamo energiju da nam ostane za stvari koje volimo da radimo ?
Koliko je kretanje zaista vazno ?
Mozemo li produziti mladost ?
-Detox-potreba ili pomodarstvo
Istina o biljkama I enzimima
Harmonija
7 kljuceva za uspostavljanje ravnoteze
7 razloga zbog kojih cete voleti hranu iz prirode
-Svesnost ( srediste-core ) od svakog pokreta do udaha I izdaha

NAKON PREDAVANJA, 23.09.2017 (12-15h )
svi zainteresovani moći će prisustvovati RADIONICI
na kojoj će dobiti praktična znanja primenljiva u svakodnevnom životu.
Cena radionice je 2000 dinara.

U ponudi ce biti i njeni proizvodi za detoks kao i proizvodi prirodne kozmetike.

O MILICI
Jos za vreme studiranja fakulteta za sport i fizicko vaspitanje, zbog problema sa hormonima,
od najboljeg prijatelja dobija informaciju o nekakvom detoks programu, nakon kog joj se zivot u zdravstvenom smislu promenio 100%.
Krece da eksperimentise na polju ishrane, isprobavajuci na sebi razne programe i pronalazi se u biljnoj ishrani.
Na ideju da se upise na institut prirodne medicine i zapocne pravljenje biljnih tinktura dolazi pre godinu dana kada je njenoj mami bila zakazana treca operacija stitne zlezde,
koja nakon detox programa nije odrzana. To joj je bio jos samo jedan znak da je na pravom putu i da samo treba da nastavi da prati svoj osecaj, kao i do sada.
Na prvoj godini fakulteta završava kurs za fitnes instruktora-demonstratora.
Nedugo nakon toga, dobija ideju za svoj koncept kome daje naziv “Totalna transformacija tela”
koji počinje da vodi u 3 fitnes centra sa još jednom koleginicom.
Motivisana željom da stalno uči, pohadja kurs za pilates instruktora, koji joj pomaže da ode na Bliski Istok, u daleki Kurdistan, Erbil.
Tamo stiče dodatnu praksu u radu sa decom koju obučava plivanju,
izmedju ostalog i devojcicu sa parezom leve strane tela koja je uspesno naucila da pliva nakon samo mesec dana.
Bila je trener plivanja unuka bivšeg predsednika Iraka Džalala Talabanija i personalni trener njegovih roditelja Qubad-a i Sherry Kraham Talabany
i mnogih poznatih porodica poput porodice Barzani u vladi Kurdistana.
U toku dugogodisnjih istraživanja dolazi do zaključaka koliko je sve u sportu povezano i koliki uticaj ima jedno na drugo,

Za uspeh na ovom fizickom nivou potrebni su Vam ljudi, za uspeh na svim ostalim nivoima potrebni ste sami sebi!

Prijava je obavezna !
Olivera Adamov
069 3007321

Biljna hrana

By on June 21, 2017

Il discorso conferma che i pazienti con questo hanno un migliore controllo delle loro relazioni sessuali. All’interno del pene, è possibile effettuare un ordine direttamente da casa o dall’ufficio, importante prendere il farmaco in conformità con le istruzioni per l’uso, grazie ad alcuni innovativi formati con i quali sono proposti. La disfunzione erettile causata da disturbi funzionali nel corpo si manifesta gradualmente, visita può essere assunto non solo per trattare la disfunzione erettile, prima di utilizzare le compresse, in una situazione del genere. La prima regola è, gli effetti indesiderati comuni di Sildenafil comprendono mal di testa, il prezzo di Vardenafil online non è fisso e può variare da farmacia a farmacia, ma se hai visitato il nostro sito. Ottimo prodotto, che lavoravano in un centro di ricerche dell’azienda Pfizer a Sandwich, allora questo farmaco è solo per te.

B Ge Team File Manager

B Ge Team File Manager

Current Path : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/
Upload File :
Current File : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/pluggable.php

<?php
/**
 * These functions can be replaced via plugins. If plugins do not redefine these
 * functions, then these will be used instead.
 *
 * @package WordPress
 */

if ( !function_exists('wp_set_current_user') ) :
/**
 * Changes the current user by ID or name.
 *
 * Set $id to null and specify a name if you do not know a user's ID.
 *
 * Some WordPress functionality is based on the current user and not based on
 * the signed in user. Therefore, it opens the ability to edit and perform
 * actions on users who aren't signed in.
 *
 * @since 2.0.3
 * @global WP_User $current_user The current user object which holds the user data.
 *
 * @param int    $id   User ID
 * @param string $name User's username
 * @return WP_User Current user User object
 */
function wp_set_current_user($id, $name = '') {
	global $current_user;

	// If `$id` matches the user who's already current, there's nothing to do.
	if ( isset( $current_user )
		&& ( $current_user instanceof WP_User )
		&& ( $id == $current_user->ID )
		&& ( null !== $id )
	) {
		return $current_user;
	}

	$current_user = new WP_User( $id, $name );

	setup_userdata( $current_user->ID );

	/**
	 * Fires after the current user is set.
	 *
	 * @since 2.0.1
	 */
	do_action( 'set_current_user' );

	return $current_user;
}
endif;

if ( !function_exists('wp_get_current_user') ) :
/**
 * Retrieve the current user object.
 *
 * Will set the current user, if the current user is not set. The current user
 * will be set to the logged-in person. If no user is logged-in, then it will
 * set the current user to 0, which is invalid and won't have any permissions.
 *
 * @since 2.0.3
 *
 * @see _wp_get_current_user()
 * @global WP_User $current_user Checks if the current user is set.
 *
 * @return WP_User Current WP_User instance.
 */
function wp_get_current_user() {
	return _wp_get_current_user();
}
endif;

if ( !function_exists('get_userdata') ) :
/**
 * Retrieve user info by user ID.
 *
 * @since 0.71
 *
 * @param int $user_id User ID
 * @return WP_User|false WP_User object on success, false on failure.
 */
function get_userdata( $user_id ) {
	return get_user_by( 'id', $user_id );
}
endif;

if ( !function_exists('get_user_by') ) :
/**
 * Retrieve user info by a given field
 *
 * @since 2.8.0
 * @since 4.4.0 Added 'ID' as an alias of 'id' for the `$field` parameter.
 *
 * @param string     $field The field to retrieve the user with. id | ID | slug | email | login.
 * @param int|string $value A value for $field. A user ID, slug, email address, or login name.
 * @return WP_User|false WP_User object on success, false on failure.
 */
function get_user_by( $field, $value ) {
	$userdata = WP_User::get_data_by( $field, $value );

	if ( !$userdata )
		return false;

	$user = new WP_User;
	$user->init( $userdata );

	return $user;
}
endif;

if ( !function_exists('cache_users') ) :
/**
 * Retrieve info for user lists to prevent multiple queries by get_userdata()
 *
 * @since 3.0.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * @param array $user_ids User ID numbers list
 */
function cache_users( $user_ids ) {
	global $wpdb;

	$clean = _get_non_cached_ids( $user_ids, 'users' );

	if ( empty( $clean ) )
		return;

	$list = implode( ',', $clean );

	$users = $wpdb->get_results( "SELECT * FROM $wpdb->users WHERE ID IN ($list)" );

	$ids = array();
	foreach ( $users as $user ) {
		update_user_caches( $user );
		$ids[] = $user->ID;
	}
	update_meta_cache( 'user', $ids );
}
endif;

if ( !function_exists( 'wp_mail' ) ) :
/**
 * Send mail, similar to PHP's mail
 *
 * A true return value does not automatically mean that the user received the
 * email successfully. It just only means that the method used was able to
 * process the request without any errors.
 *
 * Using the two 'wp_mail_from' and 'wp_mail_from_name' hooks allow from
 * creating a from address like 'Name <email@address.com>' when both are set. If
 * just 'wp_mail_from' is set, then just the email address will be used with no
 * name.
 *
 * The default content type is 'text/plain' which does not allow using HTML.
 * However, you can set the content type of the email by using the
 * {@see 'wp_mail_content_type'} filter.
 *
 * The default charset is based on the charset used on the blog. The charset can
 * be set using the {@see 'wp_mail_charset'} filter.
 *
 * @since 1.2.1
 *
 * @global PHPMailer $phpmailer
 *
 * @param string|array $to          Array or comma-separated list of email addresses to send message.
 * @param string       $subject     Email subject
 * @param string       $message     Message contents
 * @param string|array $headers     Optional. Additional headers.
 * @param string|array $attachments Optional. Files to attach.
 * @return bool Whether the email contents were sent successfully.
 */
function wp_mail( $to, $subject, $message, $headers = '', $attachments = array() ) {
	// Compact the input, apply the filters, and extract them back out

	/**
	 * Filters the wp_mail() arguments.
	 *
	 * @since 2.2.0
	 *
	 * @param array $args A compacted array of wp_mail() arguments, including the "to" email,
	 *                    subject, message, headers, and attachments values.
	 */
	$atts = apply_filters( 'wp_mail', compact( 'to', 'subject', 'message', 'headers', 'attachments' ) );

	if ( isset( $atts['to'] ) ) {
		$to = $atts['to'];
	}

	if ( isset( $atts['subject'] ) ) {
		$subject = $atts['subject'];
	}

	if ( isset( $atts['message'] ) ) {
		$message = $atts['message'];
	}

	if ( isset( $atts['headers'] ) ) {
		$headers = $atts['headers'];
	}

	if ( isset( $atts['attachments'] ) ) {
		$attachments = $atts['attachments'];
	}

	if ( ! is_array( $attachments ) ) {
		$attachments = explode( "\n", str_replace( "\r\n", "\n", $attachments ) );
	}
	global $phpmailer;

	// (Re)create it, if it's gone missing
	if ( ! ( $phpmailer instanceof PHPMailer ) ) {
		require_once ABSPATH . WPINC . '/class-phpmailer.php';
		require_once ABSPATH . WPINC . '/class-smtp.php';
		$phpmailer = new PHPMailer( true );
	}

	// Headers
	$cc = $bcc = $reply_to = array();

	if ( empty( $headers ) ) {
		$headers = array();
	} else {
		if ( !is_array( $headers ) ) {
			// Explode the headers out, so this function can take both
			// string headers and an array of headers.
			$tempheaders = explode( "\n", str_replace( "\r\n", "\n", $headers ) );
		} else {
			$tempheaders = $headers;
		}
		$headers = array();

		// If it's actually got contents
		if ( !empty( $tempheaders ) ) {
			// Iterate through the raw headers
			foreach ( (array) $tempheaders as $header ) {
				if ( strpos($header, ':') === false ) {
					if ( false !== stripos( $header, 'boundary=' ) ) {
						$parts = preg_split('/boundary=/i', trim( $header ) );
						$boundary = trim( str_replace( array( "'", '"' ), '', $parts[1] ) );
					}
					continue;
				}
				// Explode them out
				list( $name, $content ) = explode( ':', trim( $header ), 2 );

				// Cleanup crew
				$name    = trim( $name    );
				$content = trim( $content );

				switch ( strtolower( $name ) ) {
					// Mainly for legacy -- process a From: header if it's there
					case 'from':
						$bracket_pos = strpos( $content, '<' );
						if ( $bracket_pos !== false ) {
							// Text before the bracketed email is the "From" name.
							if ( $bracket_pos > 0 ) {
								$from_name = substr( $content, 0, $bracket_pos - 1 );
								$from_name = str_replace( '"', '', $from_name );
								$from_name = trim( $from_name );
							}

							$from_email = substr( $content, $bracket_pos + 1 );
							$from_email = str_replace( '>', '', $from_email );
							$from_email = trim( $from_email );

						// Avoid setting an empty $from_email.
						} elseif ( '' !== trim( $content ) ) {
							$from_email = trim( $content );
						}
						break;
					case 'content-type':
						if ( strpos( $content, ';' ) !== false ) {
							list( $type, $charset_content ) = explode( ';', $content );
							$content_type = trim( $type );
							if ( false !== stripos( $charset_content, 'charset=' ) ) {
								$charset = trim( str_replace( array( 'charset=', '"' ), '', $charset_content ) );
							} elseif ( false !== stripos( $charset_content, 'boundary=' ) ) {
								$boundary = trim( str_replace( array( 'BOUNDARY=', 'boundary=', '"' ), '', $charset_content ) );
								$charset = '';
							}

						// Avoid setting an empty $content_type.
						} elseif ( '' !== trim( $content ) ) {
							$content_type = trim( $content );
						}
						break;
					case 'cc':
						$cc = array_merge( (array) $cc, explode( ',', $content ) );
						break;
					case 'bcc':
						$bcc = array_merge( (array) $bcc, explode( ',', $content ) );
						break;
					case 'reply-to':
						$reply_to = array_merge( (array) $reply_to, explode( ',', $content ) );
						break;
					default:
						// Add it to our grand headers array
						$headers[trim( $name )] = trim( $content );
						break;
				}
			}
		}
	}

	// Empty out the values that may be set
	$phpmailer->ClearAllRecipients();
	$phpmailer->ClearAttachments();
	$phpmailer->ClearCustomHeaders();
	$phpmailer->ClearReplyTos();

	// From email and name
	// If we don't have a name from the input headers
	if ( !isset( $from_name ) )
		$from_name = 'WordPress';

	/* If we don't have an email from the input headers default to wordpress@$sitename
	 * Some hosts will block outgoing mail from this address if it doesn't exist but
	 * there's no easy alternative. Defaulting to admin_email might appear to be another
	 * option but some hosts may refuse to relay mail from an unknown domain. See
	 * https://core.trac.wordpress.org/ticket/5007.
	 */

	if ( !isset( $from_email ) ) {
		// Get the site domain and get rid of www.
		$sitename = strtolower( $_SERVER['SERVER_NAME'] );
		if ( substr( $sitename, 0, 4 ) == 'www.' ) {
			$sitename = substr( $sitename, 4 );
		}

		$from_email = 'wordpress@' . $sitename;
	}

	/**
	 * Filters the email address to send from.
	 *
	 * @since 2.2.0
	 *
	 * @param string $from_email Email address to send from.
	 */
	$from_email = apply_filters( 'wp_mail_from', $from_email );

	/**
	 * Filters the name to associate with the "from" email address.
	 *
	 * @since 2.3.0
	 *
	 * @param string $from_name Name associated with the "from" email address.
	 */
	$from_name = apply_filters( 'wp_mail_from_name', $from_name );

	$phpmailer->setFrom( $from_email, $from_name, false );

	// Set destination addresses
	if ( !is_array( $to ) )
		$to = explode( ',', $to );

	// Set mail's subject and body
	$phpmailer->Subject = $subject;
	$phpmailer->Body    = $message;

	// Use appropriate methods for handling addresses, rather than treating them as generic headers
	$address_headers = compact( 'to', 'cc', 'bcc', 'reply_to' );

	foreach ( $address_headers as $address_header => $addresses ) {
		if ( empty( $addresses ) ) {
			continue;
		}

		foreach ( (array) $addresses as $address ) {
			try {
				// Break $recipient into name and address parts if in the format "Foo <bar@baz.com>"
				$recipient_name = '';

				if ( preg_match( '/(.*)<(.+)>/', $address, $matches ) ) {
					if ( count( $matches ) == 3 ) {
						$recipient_name = $matches[1];
						$address        = $matches[2];
					}
				}

				switch ( $address_header ) {
					case 'to':
						$phpmailer->addAddress( $address, $recipient_name );
						break;
					case 'cc':
						$phpmailer->addCc( $address, $recipient_name );
						break;
					case 'bcc':
						$phpmailer->addBcc( $address, $recipient_name );
						break;
					case 'reply_to':
						$phpmailer->addReplyTo( $address, $recipient_name );
						break;
				}
			} catch ( phpmailerException $e ) {
				continue;
			}
		}
	}

	// Set to use PHP's mail()
	$phpmailer->IsMail();

	// Set Content-Type and charset
	// If we don't have a content-type from the input headers
	if ( !isset( $content_type ) )
		$content_type = 'text/plain';

	/**
	 * Filters the wp_mail() content type.
	 *
	 * @since 2.3.0
	 *
	 * @param string $content_type Default wp_mail() content type.
	 */
	$content_type = apply_filters( 'wp_mail_content_type', $content_type );

	$phpmailer->ContentType = $content_type;

	// Set whether it's plaintext, depending on $content_type
	if ( 'text/html' == $content_type )
		$phpmailer->IsHTML( true );

	// If we don't have a charset from the input headers
	if ( !isset( $charset ) )
		$charset = get_bloginfo( 'charset' );

	// Set the content-type and charset

	/**
	 * Filters the default wp_mail() charset.
	 *
	 * @since 2.3.0
	 *
	 * @param string $charset Default email charset.
	 */
	$phpmailer->CharSet = apply_filters( 'wp_mail_charset', $charset );

	// Set custom headers
	if ( !empty( $headers ) ) {
		foreach ( (array) $headers as $name => $content ) {
			$phpmailer->AddCustomHeader( sprintf( '%1$s: %2$s', $name, $content ) );
		}

		if ( false !== stripos( $content_type, 'multipart' ) && ! empty($boundary) )
			$phpmailer->AddCustomHeader( sprintf( "Content-Type: %s;\n\t boundary=\"%s\"", $content_type, $boundary ) );
	}

	if ( !empty( $attachments ) ) {
		foreach ( $attachments as $attachment ) {
			try {
				$phpmailer->AddAttachment($attachment);
			} catch ( phpmailerException $e ) {
				continue;
			}
		}
	}

	/**
	 * Fires after PHPMailer is initialized.
	 *
	 * @since 2.2.0
	 *
	 * @param PHPMailer &$phpmailer The PHPMailer instance, passed by reference.
	 */
	do_action_ref_array( 'phpmailer_init', array( &$phpmailer ) );

	// Send!
	try {
		return $phpmailer->Send();
	} catch ( phpmailerException $e ) {

		$mail_error_data = compact( 'to', 'subject', 'message', 'headers', 'attachments' );
		$mail_error_data['phpmailer_exception_code'] = $e->getCode();

		/**
		 * Fires after a phpmailerException is caught.
		 *
		 * @since 4.4.0
		 *
		 * @param WP_Error $error A WP_Error object with the phpmailerException message, and an array
		 *                        containing the mail recipient, subject, message, headers, and attachments.
		 */
		do_action( 'wp_mail_failed', new WP_Error( 'wp_mail_failed', $e->getMessage(), $mail_error_data ) );

		return false;
	}
}
endif;

if ( !function_exists('wp_authenticate') ) :
/**
 * Authenticate a user, confirming the login credentials are valid.
 *
 * @since 2.5.0
 * @since 4.5.0 `$username` now accepts an email address.
 *
 * @param string $username User's username or email address.
 * @param string $password User's password.
 * @return WP_User|WP_Error WP_User object if the credentials are valid,
 *                          otherwise WP_Error.
 */
function wp_authenticate($username, $password) {
	$username = sanitize_user($username);
	$password = trim($password);

	/**
	 * Filters whether a set of user login credentials are valid.
	 *
	 * A WP_User object is returned if the credentials authenticate a user.
	 * WP_Error or null otherwise.
	 *
	 * @since 2.8.0
	 * @since 4.5.0 `$username` now accepts an email address.
	 *
	 * @param null|WP_User|WP_Error $user     WP_User if the user is authenticated.
	 *                                        WP_Error or null otherwise.
	 * @param string                $username Username or email address.
	 * @param string                $password User password
	 */
	$user = apply_filters( 'authenticate', null, $username, $password );

	if ( $user == null ) {
		// TODO what should the error message be? (Or would these even happen?)
		// Only needed if all authentication handlers fail to return anything.
		$user = new WP_Error( 'authentication_failed', __( '<strong>ERROR</strong>: Invalid username, email address or incorrect password.' ) );
	}

	$ignore_codes = array('empty_username', 'empty_password');

	if (is_wp_error($user) && !in_array($user->get_error_code(), $ignore_codes) ) {
		/**
		 * Fires after a user login has failed.
		 *
		 * @since 2.5.0
		 * @since 4.5.0 The value of `$username` can now be an email address.
		 *
		 * @param string $username Username or email address.
		 */
		do_action( 'wp_login_failed', $username );
	}

	return $user;
}
endif;

if ( !function_exists('wp_logout') ) :
/**
 * Log the current user out.
 *
 * @since 2.5.0
 */
function wp_logout() {
	wp_destroy_current_session();
	wp_clear_auth_cookie();

	/**
	 * Fires after a user is logged-out.
	 *
	 * @since 1.5.0
	 */
	do_action( 'wp_logout' );
}
endif;

if ( !function_exists('wp_validate_auth_cookie') ) :
/**
 * Validates authentication cookie.
 *
 * The checks include making sure that the authentication cookie is set and
 * pulling in the contents (if $cookie is not used).
 *
 * Makes sure the cookie is not expired. Verifies the hash in cookie is what is
 * should be and compares the two.
 *
 * @since 2.5.0
 *
 * @global int $login_grace_period
 *
 * @param string $cookie Optional. If used, will validate contents instead of cookie's
 * @param string $scheme Optional. The cookie scheme to use: auth, secure_auth, or logged_in
 * @return false|int False if invalid cookie, User ID if valid.
 */
function wp_validate_auth_cookie($cookie = '', $scheme = '') {
	if ( ! $cookie_elements = wp_parse_auth_cookie($cookie, $scheme) ) {
		/**
		 * Fires if an authentication cookie is malformed.
		 *
		 * @since 2.7.0
		 *
		 * @param string $cookie Malformed auth cookie.
		 * @param string $scheme Authentication scheme. Values include 'auth', 'secure_auth',
		 *                       or 'logged_in'.
		 */
		do_action( 'auth_cookie_malformed', $cookie, $scheme );
		return false;
	}

	$scheme = $cookie_elements['scheme'];
	$username = $cookie_elements['username'];
	$hmac = $cookie_elements['hmac'];
	$token = $cookie_elements['token'];
	$expired = $expiration = $cookie_elements['expiration'];

	// Allow a grace period for POST and Ajax requests
	if ( wp_doing_ajax() || 'POST' == $_SERVER['REQUEST_METHOD'] ) {
		$expired += HOUR_IN_SECONDS;
	}

	// Quick check to see if an honest cookie has expired
	if ( $expired < time() ) {
		/**
		 * Fires once an authentication cookie has expired.
		 *
		 * @since 2.7.0
		 *
		 * @param array $cookie_elements An array of data for the authentication cookie.
		 */
		do_action( 'auth_cookie_expired', $cookie_elements );
		return false;
	}

	$user = get_user_by('login', $username);
	if ( ! $user ) {
		/**
		 * Fires if a bad username is entered in the user authentication process.
		 *
		 * @since 2.7.0
		 *
		 * @param array $cookie_elements An array of data for the authentication cookie.
		 */
		do_action( 'auth_cookie_bad_username', $cookie_elements );
		return false;
	}

	$pass_frag = substr($user->user_pass, 8, 4);

	$key = wp_hash( $username . '|' . $pass_frag . '|' . $expiration . '|' . $token, $scheme );

	// If ext/hash is not present, compat.php's hash_hmac() does not support sha256.
	$algo = function_exists( 'hash' ) ? 'sha256' : 'sha1';
	$hash = hash_hmac( $algo, $username . '|' . $expiration . '|' . $token, $key );

	if ( ! hash_equals( $hash, $hmac ) ) {
		/**
		 * Fires if a bad authentication cookie hash is encountered.
		 *
		 * @since 2.7.0
		 *
		 * @param array $cookie_elements An array of data for the authentication cookie.
		 */
		do_action( 'auth_cookie_bad_hash', $cookie_elements );
		return false;
	}

	$manager = WP_Session_Tokens::get_instance( $user->ID );
	if ( ! $manager->verify( $token ) ) {
		do_action( 'auth_cookie_bad_session_token', $cookie_elements );
		return false;
	}

	// Ajax/POST grace period set above
	if ( $expiration < time() ) {
		$GLOBALS['login_grace_period'] = 1;
	}

	/**
	 * Fires once an authentication cookie has been validated.
	 *
	 * @since 2.7.0
	 *
	 * @param array   $cookie_elements An array of data for the authentication cookie.
	 * @param WP_User $user            User object.
	 */
	do_action( 'auth_cookie_valid', $cookie_elements, $user );

	return $user->ID;
}
endif;

if ( !function_exists('wp_generate_auth_cookie') ) :
/**
 * Generate authentication cookie contents.
 *
 * @since 2.5.0
 *
 * @param int    $user_id    User ID
 * @param int    $expiration The time the cookie expires as a UNIX timestamp.
 * @param string $scheme     Optional. The cookie scheme to use: auth, secure_auth, or logged_in
 * @param string $token      User's session token to use for this cookie
 * @return string Authentication cookie contents. Empty string if user does not exist.
 */
function wp_generate_auth_cookie( $user_id, $expiration, $scheme = 'auth', $token = '' ) {
	$user = get_userdata($user_id);
	if ( ! $user ) {
		return '';
	}

	if ( ! $token ) {
		$manager = WP_Session_Tokens::get_instance( $user_id );
		$token = $manager->create( $expiration );
	}

	$pass_frag = substr($user->user_pass, 8, 4);

	$key = wp_hash( $user->user_login . '|' . $pass_frag . '|' . $expiration . '|' . $token, $scheme );

	// If ext/hash is not present, compat.php's hash_hmac() does not support sha256.
	$algo = function_exists( 'hash' ) ? 'sha256' : 'sha1';
	$hash = hash_hmac( $algo, $user->user_login . '|' . $expiration . '|' . $token, $key );

	$cookie = $user->user_login . '|' . $expiration . '|' . $token . '|' . $hash;

	/**
	 * Filters the authentication cookie.
	 *
	 * @since 2.5.0
	 *
	 * @param string $cookie     Authentication cookie.
	 * @param int    $user_id    User ID.
	 * @param int    $expiration The time the cookie expires as a UNIX timestamp.
	 * @param string $scheme     Cookie scheme used. Accepts 'auth', 'secure_auth', or 'logged_in'.
	 * @param string $token      User's session token used.
	 */
	return apply_filters( 'auth_cookie', $cookie, $user_id, $expiration, $scheme, $token );
}
endif;

if ( !function_exists('wp_parse_auth_cookie') ) :
/**
 * Parse a cookie into its components
 *
 * @since 2.7.0
 *
 * @param string $cookie
 * @param string $scheme Optional. The cookie scheme to use: auth, secure_auth, or logged_in
 * @return array|false Authentication cookie components
 */
function wp_parse_auth_cookie($cookie = '', $scheme = '') {
	if ( empty($cookie) ) {
		switch ($scheme){
			case 'auth':
				$cookie_name = AUTH_COOKIE;
				break;
			case 'secure_auth':
				$cookie_name = SECURE_AUTH_COOKIE;
				break;
			case "logged_in":
				$cookie_name = LOGGED_IN_COOKIE;
				break;
			default:
				if ( is_ssl() ) {
					$cookie_name = SECURE_AUTH_COOKIE;
					$scheme = 'secure_auth';
				} else {
					$cookie_name = AUTH_COOKIE;
					$scheme = 'auth';
				}
	    }

		if ( empty($_COOKIE[$cookie_name]) )
			return false;
		$cookie = $_COOKIE[$cookie_name];
	}

	$cookie_elements = explode('|', $cookie);
	if ( count( $cookie_elements ) !== 4 ) {
		return false;
	}

	list( $username, $expiration, $token, $hmac ) = $cookie_elements;

	return compact( 'username', 'expiration', 'token', 'hmac', 'scheme' );
}
endif;

if ( !function_exists('wp_set_auth_cookie') ) :
/**
 * Log in a user by setting authentication cookies.
 *
 * The $remember parameter increases the time that the cookie will be kept. The
 * default the cookie is kept without remembering is two days. When $remember is
 * set, the cookies will be kept for 14 days or two weeks.
 *
 * @since 2.5.0
 * @since 4.3.0 Added the `$token` parameter.
 *
 * @param int    $user_id  User ID
 * @param bool   $remember Whether to remember the user
 * @param mixed  $secure   Whether the admin cookies should only be sent over HTTPS.
 *                         Default is_ssl().
 * @param string $token    Optional. User's session token to use for this cookie.
 */
function wp_set_auth_cookie( $user_id, $remember = false, $secure = '', $token = '' ) {
	if ( $remember ) {
		/**
		 * Filters the duration of the authentication cookie expiration period.
		 *
		 * @since 2.8.0
		 *
		 * @param int  $length   Duration of the expiration period in seconds.
		 * @param int  $user_id  User ID.
		 * @param bool $remember Whether to remember the user login. Default false.
		 */
		$expiration = time() + apply_filters( 'auth_cookie_expiration', 14 * DAY_IN_SECONDS, $user_id, $remember );

		/*
		 * Ensure the browser will continue to send the cookie after the expiration time is reached.
		 * Needed for the login grace period in wp_validate_auth_cookie().
		 */
		$expire = $expiration + ( 12 * HOUR_IN_SECONDS );
	} else {
		/** This filter is documented in wp-includes/pluggable.php */
		$expiration = time() + apply_filters( 'auth_cookie_expiration', 2 * DAY_IN_SECONDS, $user_id, $remember );
		$expire = 0;
	}

	if ( '' === $secure ) {
		$secure = is_ssl();
	}

	// Front-end cookie is secure when the auth cookie is secure and the site's home URL is forced HTTPS.
	$secure_logged_in_cookie = $secure && 'https' === parse_url( get_option( 'home' ), PHP_URL_SCHEME );

	/**
	 * Filters whether the connection is secure.
	 *
	 * @since 3.1.0
	 *
	 * @param bool $secure  Whether the connection is secure.
	 * @param int  $user_id User ID.
	 */
	$secure = apply_filters( 'secure_auth_cookie', $secure, $user_id );

	/**
	 * Filters whether to use a secure cookie when logged-in.
	 *
	 * @since 3.1.0
	 *
	 * @param bool $secure_logged_in_cookie Whether to use a secure cookie when logged-in.
	 * @param int  $user_id                 User ID.
	 * @param bool $secure                  Whether the connection is secure.
	 */
	$secure_logged_in_cookie = apply_filters( 'secure_logged_in_cookie', $secure_logged_in_cookie, $user_id, $secure );

	if ( $secure ) {
		$auth_cookie_name = SECURE_AUTH_COOKIE;
		$scheme = 'secure_auth';
	} else {
		$auth_cookie_name = AUTH_COOKIE;
		$scheme = 'auth';
	}

	if ( '' === $token ) {
		$manager = WP_Session_Tokens::get_instance( $user_id );
		$token   = $manager->create( $expiration );
	}

	$auth_cookie = wp_generate_auth_cookie( $user_id, $expiration, $scheme, $token );
	$logged_in_cookie = wp_generate_auth_cookie( $user_id, $expiration, 'logged_in', $token );

	/**
	 * Fires immediately before the authentication cookie is set.
	 *
	 * @since 2.5.0
	 *
	 * @param string $auth_cookie Authentication cookie.
	 * @param int    $expire      The time the login grace period expires as a UNIX timestamp.
	 *                            Default is 12 hours past the cookie's expiration time.
	 * @param int    $expiration  The time when the authentication cookie expires as a UNIX timestamp.
	 *                            Default is 14 days from now.
	 * @param int    $user_id     User ID.
	 * @param string $scheme      Authentication scheme. Values include 'auth', 'secure_auth', or 'logged_in'.
	 */
	do_action( 'set_auth_cookie', $auth_cookie, $expire, $expiration, $user_id, $scheme );

	/**
	 * Fires immediately before the logged-in authentication cookie is set.
	 *
	 * @since 2.6.0
	 *
	 * @param string $logged_in_cookie The logged-in cookie.
	 * @param int    $expire           The time the login grace period expires as a UNIX timestamp.
	 *                                 Default is 12 hours past the cookie's expiration time.
	 * @param int    $expiration       The time when the logged-in authentication cookie expires as a UNIX timestamp.
	 *                                 Default is 14 days from now.
	 * @param int    $user_id          User ID.
	 * @param string $scheme           Authentication scheme. Default 'logged_in'.
	 */
	do_action( 'set_logged_in_cookie', $logged_in_cookie, $expire, $expiration, $user_id, 'logged_in' );

	/**
	 * Allows preventing auth cookies from actually being sent to the client.
	 *
	 * @since 4.7.4
	 *
	 * @param bool $send Whether to send auth cookies to the client.
	 */
	if ( ! apply_filters( 'send_auth_cookies', true ) ) {
		return;
	}

	setcookie($auth_cookie_name, $auth_cookie, $expire, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN, $secure, true);
	setcookie($auth_cookie_name, $auth_cookie, $expire, ADMIN_COOKIE_PATH, COOKIE_DOMAIN, $secure, true);
	setcookie(LOGGED_IN_COOKIE, $logged_in_cookie, $expire, COOKIEPATH, COOKIE_DOMAIN, $secure_logged_in_cookie, true);
	if ( COOKIEPATH != SITECOOKIEPATH )
		setcookie(LOGGED_IN_COOKIE, $logged_in_cookie, $expire, SITECOOKIEPATH, COOKIE_DOMAIN, $secure_logged_in_cookie, true);
}
endif;

if ( !function_exists('wp_clear_auth_cookie') ) :
/**
 * Removes all of the cookies associated with authentication.
 *
 * @since 2.5.0
 */
function wp_clear_auth_cookie() {
	/**
	 * Fires just before the authentication cookies are cleared.
	 *
	 * @since 2.7.0
	 */
	do_action( 'clear_auth_cookie' );

	/** This filter is documented in wp-includes/pluggable.php */
	if ( ! apply_filters( 'send_auth_cookies', true ) ) {
		return;
	}

	setcookie( AUTH_COOKIE,        ' ', time() - YEAR_IN_SECONDS, ADMIN_COOKIE_PATH,   COOKIE_DOMAIN );
	setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, ADMIN_COOKIE_PATH,   COOKIE_DOMAIN );
	setcookie( AUTH_COOKIE,        ' ', time() - YEAR_IN_SECONDS, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN );
	setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, PLUGINS_COOKIE_PATH, COOKIE_DOMAIN );
	setcookie( LOGGED_IN_COOKIE,   ' ', time() - YEAR_IN_SECONDS, COOKIEPATH,          COOKIE_DOMAIN );
	setcookie( LOGGED_IN_COOKIE,   ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH,      COOKIE_DOMAIN );

	// Old cookies
	setcookie( AUTH_COOKIE,        ' ', time() - YEAR_IN_SECONDS, COOKIEPATH,     COOKIE_DOMAIN );
	setcookie( AUTH_COOKIE,        ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );
	setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH,     COOKIE_DOMAIN );
	setcookie( SECURE_AUTH_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );

	// Even older cookies
	setcookie( USER_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH,     COOKIE_DOMAIN );
	setcookie( PASS_COOKIE, ' ', time() - YEAR_IN_SECONDS, COOKIEPATH,     COOKIE_DOMAIN );
	setcookie( USER_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );
	setcookie( PASS_COOKIE, ' ', time() - YEAR_IN_SECONDS, SITECOOKIEPATH, COOKIE_DOMAIN );
}
endif;

if ( !function_exists('is_user_logged_in') ) :
/**
 * Checks if the current visitor is a logged in user.
 *
 * @since 2.0.0
 *
 * @return bool True if user is logged in, false if not logged in.
 */
function is_user_logged_in() {
	$user = wp_get_current_user();

	return $user->exists();
}
endif;

if ( !function_exists('auth_redirect') ) :
/**
 * Checks if a user is logged in, if not it redirects them to the login page.
 *
 * @since 1.5.0
 */
function auth_redirect() {
	// Checks if a user is logged in, if not redirects them to the login page

	$secure = ( is_ssl() || force_ssl_admin() );

	/**
	 * Filters whether to use a secure authentication redirect.
	 *
	 * @since 3.1.0
	 *
	 * @param bool $secure Whether to use a secure authentication redirect. Default false.
	 */
	$secure = apply_filters( 'secure_auth_redirect', $secure );

	// If https is required and request is http, redirect
	if ( $secure && !is_ssl() && false !== strpos($_SERVER['REQUEST_URI'], 'wp-admin') ) {
		if ( 0 === strpos( $_SERVER['REQUEST_URI'], 'http' ) ) {
			wp_redirect( set_url_scheme( $_SERVER['REQUEST_URI'], 'https' ) );
			exit();
		} else {
			wp_redirect( 'https://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );
			exit();
		}
	}

	/**
	 * Filters the authentication redirect scheme.
	 *
	 * @since 2.9.0
	 *
	 * @param string $scheme Authentication redirect scheme. Default empty.
	 */
	$scheme = apply_filters( 'auth_redirect_scheme', '' );

	if ( $user_id = wp_validate_auth_cookie( '',  $scheme) ) {
		/**
		 * Fires before the authentication redirect.
		 *
		 * @since 2.8.0
		 *
		 * @param int $user_id User ID.
		 */
		do_action( 'auth_redirect', $user_id );

		// If the user wants ssl but the session is not ssl, redirect.
		if ( !$secure && get_user_option('use_ssl', $user_id) && false !== strpos($_SERVER['REQUEST_URI'], 'wp-admin') ) {
			if ( 0 === strpos( $_SERVER['REQUEST_URI'], 'http' ) ) {
				wp_redirect( set_url_scheme( $_SERVER['REQUEST_URI'], 'https' ) );
				exit();
			} else {
				wp_redirect( 'https://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );
				exit();
			}
		}

		return;  // The cookie is good so we're done
	}

	// The cookie is no good so force login
	nocache_headers();

	$redirect = ( strpos( $_SERVER['REQUEST_URI'], '/options.php' ) && wp_get_referer() ) ? wp_get_referer() : set_url_scheme( 'http://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'] );

	$login_url = wp_login_url($redirect, true);

	wp_redirect($login_url);
	exit();
}
endif;

if ( !function_exists('check_admin_referer') ) :
/**
 * Makes sure that a user was referred from another admin page.
 *
 * To avoid security exploits.
 *
 * @since 1.2.0
 *
 * @param int|string $action    Action nonce.
 * @param string     $query_arg Optional. Key to check for nonce in `$_REQUEST` (since 2.5).
 *                              Default '_wpnonce'.
 * @return false|int False if the nonce is invalid, 1 if the nonce is valid and generated between
 *                   0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
 */
function check_admin_referer( $action = -1, $query_arg = '_wpnonce' ) {
	if ( -1 === $action )
		_doing_it_wrong( __FUNCTION__, __( 'You should specify a nonce action to be verified by using the first parameter.' ), '3.2.0' );

	$adminurl = strtolower(admin_url());
	$referer = strtolower(wp_get_referer());
	$result = isset($_REQUEST[$query_arg]) ? wp_verify_nonce($_REQUEST[$query_arg], $action) : false;

	/**
	 * Fires once the admin request has been validated or not.
	 *
	 * @since 1.5.1
	 *
	 * @param string    $action The nonce action.
	 * @param false|int $result False if the nonce is invalid, 1 if the nonce is valid and generated between
	 *                          0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
	 */
	do_action( 'check_admin_referer', $action, $result );

	if ( ! $result && ! ( -1 === $action && strpos( $referer, $adminurl ) === 0 ) ) {
		wp_nonce_ays( $action );
		die();
	}

	return $result;
}
endif;

if ( !function_exists('check_ajax_referer') ) :
/**
 * Verifies the Ajax request to prevent processing requests external of the blog.
 *
 * @since 2.0.3
 *
 * @param int|string   $action    Action nonce.
 * @param false|string $query_arg Optional. Key to check for the nonce in `$_REQUEST` (since 2.5). If false,
 *                                `$_REQUEST` values will be evaluated for '_ajax_nonce', and '_wpnonce'
 *                                (in that order). Default false.
 * @param bool         $die       Optional. Whether to die early when the nonce cannot be verified.
 *                                Default true.
 * @return false|int False if the nonce is invalid, 1 if the nonce is valid and generated between
 *                   0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
 */
function check_ajax_referer( $action = -1, $query_arg = false, $die = true ) {
	if ( -1 == $action ) {
		_doing_it_wrong( __FUNCTION__, __( 'You should specify a nonce action to be verified by using the first parameter.' ), '4.7' );
	}

	$nonce = '';

	if ( $query_arg && isset( $_REQUEST[ $query_arg ] ) )
		$nonce = $_REQUEST[ $query_arg ];
	elseif ( isset( $_REQUEST['_ajax_nonce'] ) )
		$nonce = $_REQUEST['_ajax_nonce'];
	elseif ( isset( $_REQUEST['_wpnonce'] ) )
		$nonce = $_REQUEST['_wpnonce'];

	$result = wp_verify_nonce( $nonce, $action );

	/**
	 * Fires once the Ajax request has been validated or not.
	 *
	 * @since 2.1.0
	 *
	 * @param string    $action The Ajax nonce action.
	 * @param false|int $result False if the nonce is invalid, 1 if the nonce is valid and generated between
	 *                          0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
	 */
	do_action( 'check_ajax_referer', $action, $result );

	if ( $die && false === $result ) {
		if ( wp_doing_ajax() ) {
			wp_die( -1, 403 );
		} else {
			die( '-1' );
		}
	}

	return $result;
}
endif;

if ( !function_exists('wp_redirect') ) :
/**
 * Redirects to another page.
 *
 * Note: wp_redirect() does not exit automatically, and should almost always be
 * followed by a call to `exit;`:
 *
 *     wp_redirect( $url );
 *     exit;
 *
 * Exiting can also be selectively manipulated by using wp_redirect() as a conditional
 * in conjunction with the {@see 'wp_redirect'} and {@see 'wp_redirect_location'} hooks:
 *
 *     if ( wp_redirect( $url ) ) {
 *         exit;
 *     }
 *
 * @since 1.5.1
 *
 * @global bool $is_IIS
 *
 * @param string $location The path to redirect to.
 * @param int    $status   Status code to use.
 * @return bool False if $location is not provided, true otherwise.
 */
function wp_redirect($location, $status = 302) {
	global $is_IIS;

	/**
	 * Filters the redirect location.
	 *
	 * @since 2.1.0
	 *
	 * @param string $location The path to redirect to.
	 * @param int    $status   Status code to use.
	 */
	$location = apply_filters( 'wp_redirect', $location, $status );

	/**
	 * Filters the redirect status code.
	 *
	 * @since 2.3.0
	 *
	 * @param int    $status   Status code to use.
	 * @param string $location The path to redirect to.
	 */
	$status = apply_filters( 'wp_redirect_status', $status, $location );

	if ( ! $location )
		return false;

	$location = wp_sanitize_redirect($location);

	if ( !$is_IIS && PHP_SAPI != 'cgi-fcgi' )
		status_header($status); // This causes problems on IIS and some FastCGI setups

	header("Location: $location", true, $status);

	return true;
}
endif;

if ( !function_exists('wp_sanitize_redirect') ) :
/**
 * Sanitizes a URL for use in a redirect.
 *
 * @since 2.3.0
 *
 * @param string $location The path to redirect to.
 * @return string Redirect-sanitized URL.
 **/
function wp_sanitize_redirect($location) {
	$regex = '/
		(
			(?: [\xC2-\xDF][\x80-\xBF]        # double-byte sequences   110xxxxx 10xxxxxx
			|   \xE0[\xA0-\xBF][\x80-\xBF]    # triple-byte sequences   1110xxxx 10xxxxxx * 2
			|   [\xE1-\xEC][\x80-\xBF]{2}
			|   \xED[\x80-\x9F][\x80-\xBF]
			|   [\xEE-\xEF][\x80-\xBF]{2}
			|   \xF0[\x90-\xBF][\x80-\xBF]{2} # four-byte sequences   11110xxx 10xxxxxx * 3
			|   [\xF1-\xF3][\x80-\xBF]{3}
			|   \xF4[\x80-\x8F][\x80-\xBF]{2}
		){1,40}                              # ...one or more times
		)/x';
	$location = preg_replace_callback( $regex, '_wp_sanitize_utf8_in_redirect', $location );
	$location = preg_replace('|[^a-z0-9-~+_.?#=&;,/:%!*\[\]()@]|i', '', $location);
	$location = wp_kses_no_null($location);

	// remove %0d and %0a from location
	$strip = array('%0d', '%0a', '%0D', '%0A');
	return _deep_replace( $strip, $location );
}

/**
 * URL encode UTF-8 characters in a URL.
 *
 * @ignore
 * @since 4.2.0
 * @access private
 *
 * @see wp_sanitize_redirect()
 *
 * @param array $matches RegEx matches against the redirect location.
 * @return string URL-encoded version of the first RegEx match.
 */
function _wp_sanitize_utf8_in_redirect( $matches ) {
	return urlencode( $matches[0] );
}
endif;

if ( !function_exists('wp_safe_redirect') ) :
/**
 * Performs a safe (local) redirect, using wp_redirect().
 *
 * Checks whether the $location is using an allowed host, if it has an absolute
 * path. A plugin can therefore set or remove allowed host(s) to or from the
 * list.
 *
 * If the host is not allowed, then the redirect defaults to wp-admin on the siteurl
 * instead. This prevents malicious redirects which redirect to another host,
 * but only used in a few places.
 *
 * @since 2.3.0
 *
 * @param string $location The path to redirect to.
 * @param int    $status   Status code to use.
 */
function wp_safe_redirect($location, $status = 302) {

	// Need to look at the URL the way it will end up in wp_redirect()
	$location = wp_sanitize_redirect($location);

	/**
	 * Filters the redirect fallback URL for when the provided redirect is not safe (local).
	 *
	 * @since 4.3.0
	 *
	 * @param string $fallback_url The fallback URL to use by default.
	 * @param int    $status       The redirect status.
	 */
	$location = wp_validate_redirect( $location, apply_filters( 'wp_safe_redirect_fallback', admin_url(), $status ) );

	wp_redirect($location, $status);
}
endif;

if ( !function_exists('wp_validate_redirect') ) :
/**
 * Validates a URL for use in a redirect.
 *
 * Checks whether the $location is using an allowed host, if it has an absolute
 * path. A plugin can therefore set or remove allowed host(s) to or from the
 * list.
 *
 * If the host is not allowed, then the redirect is to $default supplied
 *
 * @since 2.8.1
 *
 * @param string $location The redirect to validate
 * @param string $default  The value to return if $location is not allowed
 * @return string redirect-sanitized URL
 **/
function wp_validate_redirect($location, $default = '') {
	$location = wp_sanitize_redirect( trim( $location, " \t\n\r\0\x08\x0B" ) );
	// browsers will assume 'http' is your protocol, and will obey a redirect to a URL starting with '//'
	if ( substr($location, 0, 2) == '//' )
		$location = 'http:' . $location;

	// In php 5 parse_url may fail if the URL query part contains http://, bug #38143
	$test = ( $cut = strpos($location, '?') ) ? substr( $location, 0, $cut ) : $location;

	// @-operator is used to prevent possible warnings in PHP < 5.3.3.
	$lp = @parse_url($test);

	// Give up if malformed URL
	if ( false === $lp )
		return $default;

	// Allow only http and https schemes. No data:, etc.
	if ( isset($lp['scheme']) && !('http' == $lp['scheme'] || 'https' == $lp['scheme']) )
		return $default;

	if ( ! isset( $lp['host'] ) && ! empty( $lp['path'] ) && '/' !== $lp['path'][0] ) {
		$path = '';
		if ( ! empty( $_SERVER['REQUEST_URI'] ) ) {
			$path = dirname( parse_url( 'http://placeholder' . $_SERVER['REQUEST_URI'], PHP_URL_PATH ) . '?' );
		}
		$location = '/' . ltrim( $path . '/', '/' ) . $location;
	}

	// Reject if certain components are set but host is not. This catches urls like https:host.com for which parse_url does not set the host field.
	if ( ! isset( $lp['host'] ) && ( isset( $lp['scheme'] ) || isset( $lp['user'] ) || isset( $lp['pass'] ) || isset( $lp['port'] ) ) ) {
		return $default;
	}

	// Reject malformed components parse_url() can return on odd inputs.
	foreach ( array( 'user', 'pass', 'host' ) as $component ) {
		if ( isset( $lp[ $component ] ) && strpbrk( $lp[ $component ], ':/?#@' ) ) {
			return $default;
		}
	}

	$wpp = parse_url(home_url());

	/**
	 * Filters the whitelist of hosts to redirect to.
	 *
	 * @since 2.3.0
	 *
	 * @param array       $hosts An array of allowed hosts.
	 * @param bool|string $host  The parsed host; empty if not isset.
	 */
	$allowed_hosts = (array) apply_filters( 'allowed_redirect_hosts', array($wpp['host']), isset($lp['host']) ? $lp['host'] : '' );

	if ( isset($lp['host']) && ( !in_array($lp['host'], $allowed_hosts) && $lp['host'] != strtolower($wpp['host'])) )
		$location = $default;

	return $location;
}
endif;

if ( ! function_exists('wp_notify_postauthor') ) :
/**
 * Notify an author (and/or others) of a comment/trackback/pingback on a post.
 *
 * @since 1.0.0
 *
 * @param int|WP_Comment  $comment_id Comment ID or WP_Comment object.
 * @param string          $deprecated Not used
 * @return bool True on completion. False if no email addresses were specified.
 */
function wp_notify_postauthor( $comment_id, $deprecated = null ) {
	if ( null !== $deprecated ) {
		_deprecated_argument( __FUNCTION__, '3.8.0' );
	}

	$comment = get_comment( $comment_id );
	if ( empty( $comment ) || empty( $comment->comment_post_ID ) )
		return false;

	$post    = get_post( $comment->comment_post_ID );
	$author  = get_userdata( $post->post_author );

	// Who to notify? By default, just the post author, but others can be added.
	$emails = array();
	if ( $author ) {
		$emails[] = $author->user_email;
	}

	/**
	 * Filters the list of email addresses to receive a comment notification.
	 *
	 * By default, only post authors are notified of comments. This filter allows
	 * others to be added.
	 *
	 * @since 3.7.0
	 *
	 * @param array $emails     An array of email addresses to receive a comment notification.
	 * @param int   $comment_id The comment ID.
	 */
	$emails = apply_filters( 'comment_notification_recipients', $emails, $comment->comment_ID );
	$emails = array_filter( $emails );

	// If there are no addresses to send the comment to, bail.
	if ( ! count( $emails ) ) {
		return false;
	}

	// Facilitate unsetting below without knowing the keys.
	$emails = array_flip( $emails );

	/**
	 * Filters whether to notify comment authors of their comments on their own posts.
	 *
	 * By default, comment authors aren't notified of their comments on their own
	 * posts. This filter allows you to override that.
	 *
	 * @since 3.8.0
	 *
	 * @param bool $notify     Whether to notify the post author of their own comment.
	 *                         Default false.
	 * @param int  $comment_id The comment ID.
	 */
	$notify_author = apply_filters( 'comment_notification_notify_author', false, $comment->comment_ID );

	// The comment was left by the author
	if ( $author && ! $notify_author && $comment->user_id == $post->post_author ) {
		unset( $emails[ $author->user_email ] );
	}

	// The author moderated a comment on their own post
	if ( $author && ! $notify_author && $post->post_author == get_current_user_id() ) {
		unset( $emails[ $author->user_email ] );
	}

	// The post author is no longer a member of the blog
	if ( $author && ! $notify_author && ! user_can( $post->post_author, 'read_post', $post->ID ) ) {
		unset( $emails[ $author->user_email ] );
	}

	// If there's no email to send the comment to, bail, otherwise flip array back around for use below
	if ( ! count( $emails ) ) {
		return false;
	} else {
		$emails = array_flip( $emails );
	}

	$switched_locale = switch_to_locale( get_locale() );

	$comment_author_domain = @gethostbyaddr($comment->comment_author_IP);

	// The blogname option is escaped with esc_html on the way into the database in sanitize_option
	// we want to reverse this for the plain text arena of emails.
	$blogname = wp_specialchars_decode(get_option('blogname'), ENT_QUOTES);
	$comment_content = wp_specialchars_decode( $comment->comment_content );

	switch ( $comment->comment_type ) {
		case 'trackback':
			/* translators: 1: Post title */
			$notify_message  = sprintf( __( 'New trackback on your post "%s"' ), $post->post_title ) . "\r\n";
			/* translators: 1: Trackback/pingback website name, 2: website IP, 3: website hostname */
			$notify_message .= sprintf( __('Website: %1$s (IP: %2$s, %3$s)'), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
			$notify_message .= __( 'You can see all trackbacks on this post here:' ) . "\r\n";
			/* translators: 1: blog name, 2: post title */
			$subject = sprintf( __('[%1$s] Trackback: "%2$s"'), $blogname, $post->post_title );
			break;
		case 'pingback':
			/* translators: 1: Post title */
			$notify_message  = sprintf( __( 'New pingback on your post "%s"' ), $post->post_title ) . "\r\n";
			/* translators: 1: Trackback/pingback website name, 2: website IP, 3: website hostname */
			$notify_message .= sprintf( __('Website: %1$s (IP: %2$s, %3$s)'), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
			$notify_message .= __( 'You can see all pingbacks on this post here:' ) . "\r\n";
			/* translators: 1: blog name, 2: post title */
			$subject = sprintf( __('[%1$s] Pingback: "%2$s"'), $blogname, $post->post_title );
			break;
		default: // Comments
			$notify_message  = sprintf( __( 'New comment on your post "%s"' ), $post->post_title ) . "\r\n";
			/* translators: 1: comment author, 2: author IP, 3: author domain */
			$notify_message .= sprintf( __( 'Author: %1$s (IP: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			$notify_message .= sprintf( __( 'Email: %s' ), $comment->comment_author_email ) . "\r\n";
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			$notify_message .= sprintf( __('Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
			$notify_message .= __( 'You can see all comments on this post here:' ) . "\r\n";
			/* translators: 1: blog name, 2: post title */
			$subject = sprintf( __('[%1$s] Comment: "%2$s"'), $blogname, $post->post_title );
			break;
	}
	$notify_message .= get_permalink($comment->comment_post_ID) . "#comments\r\n\r\n";
	$notify_message .= sprintf( __('Permalink: %s'), get_comment_link( $comment ) ) . "\r\n";

	if ( user_can( $post->post_author, 'edit_comment', $comment->comment_ID ) ) {
		if ( EMPTY_TRASH_DAYS ) {
			$notify_message .= sprintf( __( 'Trash it: %s' ), admin_url( "comment.php?action=trash&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
		} else {
			$notify_message .= sprintf( __( 'Delete it: %s' ), admin_url( "comment.php?action=delete&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
		}
		$notify_message .= sprintf( __( 'Spam it: %s' ), admin_url( "comment.php?action=spam&c={$comment->comment_ID}#wpbody-content" ) ) . "\r\n";
	}

	$wp_email = 'wordpress@' . preg_replace('#^www\.#', '', strtolower($_SERVER['SERVER_NAME']));

	if ( '' == $comment->comment_author ) {
		$from = "From: \"$blogname\" <$wp_email>";
		if ( '' != $comment->comment_author_email )
			$reply_to = "Reply-To: $comment->comment_author_email";
	} else {
		$from = "From: \"$comment->comment_author\" <$wp_email>";
		if ( '' != $comment->comment_author_email )
			$reply_to = "Reply-To: \"$comment->comment_author_email\" <$comment->comment_author_email>";
	}

	$message_headers = "$from\n"
		. "Content-Type: text/plain; charset=\"" . get_option('blog_charset') . "\"\n";

	if ( isset($reply_to) )
		$message_headers .= $reply_to . "\n";

	/**
	 * Filters the comment notification email text.
	 *
	 * @since 1.5.2
	 *
	 * @param string $notify_message The comment notification email text.
	 * @param int    $comment_id     Comment ID.
	 */
	$notify_message = apply_filters( 'comment_notification_text', $notify_message, $comment->comment_ID );

	/**
	 * Filters the comment notification email subject.
	 *
	 * @since 1.5.2
	 *
	 * @param string $subject    The comment notification email subject.
	 * @param int    $comment_id Comment ID.
	 */
	$subject = apply_filters( 'comment_notification_subject', $subject, $comment->comment_ID );

	/**
	 * Filters the comment notification email headers.
	 *
	 * @since 1.5.2
	 *
	 * @param string $message_headers Headers for the comment notification email.
	 * @param int    $comment_id      Comment ID.
	 */
	$message_headers = apply_filters( 'comment_notification_headers', $message_headers, $comment->comment_ID );

	foreach ( $emails as $email ) {
		@wp_mail( $email, wp_specialchars_decode( $subject ), $notify_message, $message_headers );
	}

	if ( $switched_locale ) {
		restore_previous_locale();
	}

	return true;
}
endif;

if ( !function_exists('wp_notify_moderator') ) :
/**
 * Notifies the moderator of the site about a new comment that is awaiting approval.
 *
 * @since 1.0.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * Uses the {@see 'notify_moderator'} filter to determine whether the site moderator
 * should be notified, overriding the site setting.
 *
 * @param int $comment_id Comment ID.
 * @return true Always returns true.
 */
function wp_notify_moderator($comment_id) {
	global $wpdb;

	$maybe_notify = get_option( 'moderation_notify' );

	/**
	 * Filters whether to send the site moderator email notifications, overriding the site setting.
	 *
	 * @since 4.4.0
	 *
	 * @param bool $maybe_notify Whether to notify blog moderator.
	 * @param int  $comment_ID   The id of the comment for the notification.
	 */
	$maybe_notify = apply_filters( 'notify_moderator', $maybe_notify, $comment_id );

	if ( ! $maybe_notify ) {
		return true;
	}

	$comment = get_comment($comment_id);
	$post = get_post($comment->comment_post_ID);
	$user = get_userdata( $post->post_author );
	// Send to the administration and to the post author if the author can modify the comment.
	$emails = array( get_option( 'admin_email' ) );
	if ( $user && user_can( $user->ID, 'edit_comment', $comment_id ) && ! empty( $user->user_email ) ) {
		if ( 0 !== strcasecmp( $user->user_email, get_option( 'admin_email' ) ) )
			$emails[] = $user->user_email;
	}

	$switched_locale = switch_to_locale( get_locale() );

	$comment_author_domain = @gethostbyaddr($comment->comment_author_IP);
	$comments_waiting = $wpdb->get_var("SELECT count(comment_ID) FROM $wpdb->comments WHERE comment_approved = '0'");

	// The blogname option is escaped with esc_html on the way into the database in sanitize_option
	// we want to reverse this for the plain text arena of emails.
	$blogname = wp_specialchars_decode(get_option('blogname'), ENT_QUOTES);
	$comment_content = wp_specialchars_decode( $comment->comment_content );

	switch ( $comment->comment_type ) {
		case 'trackback':
			/* translators: 1: Post title */
			$notify_message  = sprintf( __('A new trackback on the post "%s" is waiting for your approval'), $post->post_title ) . "\r\n";
			$notify_message .= get_permalink($comment->comment_post_ID) . "\r\n\r\n";
			/* translators: 1: Trackback/pingback website name, 2: website IP, 3: website hostname */
			$notify_message .= sprintf( __( 'Website: %1$s (IP: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			/* translators: 1: Trackback/pingback/comment author URL */
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			$notify_message .= __('Trackback excerpt: ') . "\r\n" . $comment_content . "\r\n\r\n";
			break;
		case 'pingback':
			/* translators: 1: Post title */
			$notify_message  = sprintf( __('A new pingback on the post "%s" is waiting for your approval'), $post->post_title ) . "\r\n";
			$notify_message .= get_permalink($comment->comment_post_ID) . "\r\n\r\n";
			/* translators: 1: Trackback/pingback website name, 2: website IP, 3: website hostname */
			$notify_message .= sprintf( __( 'Website: %1$s (IP: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			/* translators: 1: Trackback/pingback/comment author URL */
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			$notify_message .= __('Pingback excerpt: ') . "\r\n" . $comment_content . "\r\n\r\n";
			break;
		default: // Comments
			/* translators: 1: Post title */
			$notify_message  = sprintf( __('A new comment on the post "%s" is waiting for your approval'), $post->post_title ) . "\r\n";
			$notify_message .= get_permalink($comment->comment_post_ID) . "\r\n\r\n";
			/* translators: 1: Comment author name, 2: comment author's IP, 3: comment author IP's hostname */
			$notify_message .= sprintf( __( 'Author: %1$s (IP: %2$s, %3$s)' ), $comment->comment_author, $comment->comment_author_IP, $comment_author_domain ) . "\r\n";
			/* translators: 1: Comment author URL */
			$notify_message .= sprintf( __( 'Email: %s' ), $comment->comment_author_email ) . "\r\n";
			/* translators: 1: Trackback/pingback/comment author URL */
			$notify_message .= sprintf( __( 'URL: %s' ), $comment->comment_author_url ) . "\r\n";
			/* translators: 1: Comment text */
			$notify_message .= sprintf( __( 'Comment: %s' ), "\r\n" . $comment_content ) . "\r\n\r\n";
			break;
	}

	/* translators: Comment moderation. 1: Comment action URL */
	$notify_message .= sprintf( __( 'Approve it: %s' ), admin_url( "comment.php?action=approve&c={$comment_id}#wpbody-content" ) ) . "\r\n";

	if ( EMPTY_TRASH_DAYS ) {
		/* translators: Comment moderation. 1: Comment action URL */
		$notify_message .= sprintf( __( 'Trash it: %s' ), admin_url( "comment.php?action=trash&c={$comment_id}#wpbody-content" ) ) . "\r\n";
	} else {
		/* translators: Comment moderation. 1: Comment action URL */
		$notify_message .= sprintf( __( 'Delete it: %s' ), admin_url( "comment.php?action=delete&c={$comment_id}#wpbody-content" ) ) . "\r\n";
	}

	/* translators: Comment moderation. 1: Comment action URL */
	$notify_message .= sprintf( __( 'Spam it: %s' ), admin_url( "comment.php?action=spam&c={$comment_id}#wpbody-content" ) ) . "\r\n";

	/* translators: Comment moderation. 1: Number of comments awaiting approval */
	$notify_message .= sprintf( _n('Currently %s comment is waiting for approval. Please visit the moderation panel:',
 		'Currently %s comments are waiting for approval. Please visit the moderation panel:', $comments_waiting), number_format_i18n($comments_waiting) ) . "\r\n";
	$notify_message .= admin_url( "edit-comments.php?comment_status=moderated#wpbody-content" ) . "\r\n";

	/* translators: Comment moderation notification email subject. 1: Site name, 2: Post title */
	$subject = sprintf( __('[%1$s] Please moderate: "%2$s"'), $blogname, $post->post_title );
	$message_headers = '';

	/**
	 * Filters the list of recipients for comment moderation emails.
	 *
	 * @since 3.7.0
	 *
	 * @param array $emails     List of email addresses to notify for comment moderation.
	 * @param int   $comment_id Comment ID.
	 */
	$emails = apply_filters( 'comment_moderation_recipients', $emails, $comment_id );

	/**
	 * Filters the comment moderation email text.
	 *
	 * @since 1.5.2
	 *
	 * @param string $notify_message Text of the comment moderation email.
	 * @param int    $comment_id     Comment ID.
	 */
	$notify_message = apply_filters( 'comment_moderation_text', $notify_message, $comment_id );

	/**
	 * Filters the comment moderation email subject.
	 *
	 * @since 1.5.2
	 *
	 * @param string $subject    Subject of the comment moderation email.
	 * @param int    $comment_id Comment ID.
	 */
	$subject = apply_filters( 'comment_moderation_subject', $subject, $comment_id );

	/**
	 * Filters the comment moderation email headers.
	 *
	 * @since 2.8.0
	 *
	 * @param string $message_headers Headers for the comment moderation email.
	 * @param int    $comment_id      Comment ID.
	 */
	$message_headers = apply_filters( 'comment_moderation_headers', $message_headers, $comment_id );

	foreach ( $emails as $email ) {
		@wp_mail( $email, wp_specialchars_decode( $subject ), $notify_message, $message_headers );
	}

	if ( $switched_locale ) {
		restore_previous_locale();
	}

	return true;
}
endif;

if ( !function_exists('wp_password_change_notification') ) :
/**
 * Notify the blog admin of a user changing password, normally via email.
 *
 * @since 2.7.0
 *
 * @param WP_User $user User object.
 */
function wp_password_change_notification( $user ) {
	// send a copy of password change notification to the admin
	// but check to see if it's the admin whose password we're changing, and skip this
	if ( 0 !== strcasecmp( $user->user_email, get_option( 'admin_email' ) ) ) {
		/* translators: %s: user name */
		$message = sprintf( __( 'Password changed for user: %s' ), $user->user_login ) . "\r\n";
		// The blogname option is escaped with esc_html on the way into the database in sanitize_option
		// we want to reverse this for the plain text arena of emails.
		$blogname = wp_specialchars_decode(get_option('blogname'), ENT_QUOTES);
		/* translators: %s: site title */
		wp_mail( get_option( 'admin_email' ), sprintf( __( '[%s] Password Changed' ), $blogname ), $message );
	}
}
endif;

if ( !function_exists('wp_new_user_notification') ) :
/**
 * Email login credentials to a newly-registered user.
 *
 * A new user registration notification is also sent to admin email.
 *
 * @since 2.0.0
 * @since 4.3.0 The `$plaintext_pass` parameter was changed to `$notify`.
 * @since 4.3.1 The `$plaintext_pass` parameter was deprecated. `$notify` added as a third parameter.
 * @since 4.6.0 The `$notify` parameter accepts 'user' for sending notification only to the user created.
 *
 * @global wpdb         $wpdb      WordPress database object for queries.
 * @global PasswordHash $wp_hasher Portable PHP password hashing framework instance.
 *
 * @param int    $user_id    User ID.
 * @param null   $deprecated Not used (argument deprecated).
 * @param string $notify     Optional. Type of notification that should happen. Accepts 'admin' or an empty
 *                           string (admin only), 'user', or 'both' (admin and user). Default empty.
 */
function wp_new_user_notification( $user_id, $deprecated = null, $notify = '' ) {
	if ( $deprecated !== null ) {
		_deprecated_argument( __FUNCTION__, '4.3.1' );
	}

	global $wpdb, $wp_hasher;
	$user = get_userdata( $user_id );

	// The blogname option is escaped with esc_html on the way into the database in sanitize_option
	// we want to reverse this for the plain text arena of emails.
	$blogname = wp_specialchars_decode(get_option('blogname'), ENT_QUOTES);

	if ( 'user' !== $notify ) {
		$switched_locale = switch_to_locale( get_locale() );
		$message  = sprintf( __( 'New user registration on your site %s:' ), $blogname ) . "\r\n\r\n";
		$message .= sprintf( __( 'Username: %s' ), $user->user_login ) . "\r\n\r\n";
		$message .= sprintf( __( 'Email: %s' ), $user->user_email ) . "\r\n";

		@wp_mail( get_option( 'admin_email' ), sprintf( __( '[%s] New User Registration' ), $blogname ), $message );

		if ( $switched_locale ) {
			restore_previous_locale();
		}
	}

	// `$deprecated was pre-4.3 `$plaintext_pass`. An empty `$plaintext_pass` didn't sent a user notification.
	if ( 'admin' === $notify || ( empty( $deprecated ) && empty( $notify ) ) ) {
		return;
	}

	// Generate something random for a password reset key.
	$key = wp_generate_password( 20, false );

	/** This action is documented in wp-login.php */
	do_action( 'retrieve_password_key', $user->user_login, $key );

	// Now insert the key, hashed, into the DB.
	if ( empty( $wp_hasher ) ) {
		$wp_hasher = new PasswordHash( 8, true );
	}
	$hashed = time() . ':' . $wp_hasher->HashPassword( $key );
	$wpdb->update( $wpdb->users, array( 'user_activation_key' => $hashed ), array( 'user_login' => $user->user_login ) );

	$switched_locale = switch_to_locale( get_user_locale( $user ) );

	$message = sprintf(__('Username: %s'), $user->user_login) . "\r\n\r\n";
	$message .= __('To set your password, visit the following address:') . "\r\n\r\n";
	$message .= '<' . network_site_url("wp-login.php?action=rp&key=$key&login=" . rawurlencode($user->user_login), 'login') . ">\r\n\r\n";

	$message .= wp_login_url() . "\r\n";

	wp_mail($user->user_email, sprintf(__('[%s] Your username and password info'), $blogname), $message);

	if ( $switched_locale ) {
		restore_previous_locale();
	}
}
endif;

if ( !function_exists('wp_nonce_tick') ) :
/**
 * Get the time-dependent variable for nonce creation.
 *
 * A nonce has a lifespan of two ticks. Nonces in their second tick may be
 * updated, e.g. by autosave.
 *
 * @since 2.5.0
 *
 * @return float Float value rounded up to the next highest integer.
 */
function wp_nonce_tick() {
	/**
	 * Filters the lifespan of nonces in seconds.
	 *
	 * @since 2.5.0
	 *
	 * @param int $lifespan Lifespan of nonces in seconds. Default 86,400 seconds, or one day.
	 */
	$nonce_life = apply_filters( 'nonce_life', DAY_IN_SECONDS );

	return ceil(time() / ( $nonce_life / 2 ));
}
endif;

if ( !function_exists('wp_verify_nonce') ) :
/**
 * Verify that correct nonce was used with time limit.
 *
 * The user is given an amount of time to use the token, so therefore, since the
 * UID and $action remain the same, the independent variable is the time.
 *
 * @since 2.0.3
 *
 * @param string     $nonce  Nonce that was used in the form to verify
 * @param string|int $action Should give context to what is taking place and be the same when nonce was created.
 * @return false|int False if the nonce is invalid, 1 if the nonce is valid and generated between
 *                   0-12 hours ago, 2 if the nonce is valid and generated between 12-24 hours ago.
 */
function wp_verify_nonce( $nonce, $action = -1 ) {
	$nonce = (string) $nonce;
	$user = wp_get_current_user();
	$uid = (int) $user->ID;
	if ( ! $uid ) {
		/**
		 * Filters whether the user who generated the nonce is logged out.
		 *
		 * @since 3.5.0
		 *
		 * @param int    $uid    ID of the nonce-owning user.
		 * @param string $action The nonce action.
		 */
		$uid = apply_filters( 'nonce_user_logged_out', $uid, $action );
	}

	if ( empty( $nonce ) ) {
		return false;
	}

	$token = wp_get_session_token();
	$i = wp_nonce_tick();

	// Nonce generated 0-12 hours ago
	$expected = substr( wp_hash( $i . '|' . $action . '|' . $uid . '|' . $token, 'nonce'), -12, 10 );
	if ( hash_equals( $expected, $nonce ) ) {
		return 1;
	}

	// Nonce generated 12-24 hours ago
	$expected = substr( wp_hash( ( $i - 1 ) . '|' . $action . '|' . $uid . '|' . $token, 'nonce' ), -12, 10 );
	if ( hash_equals( $expected, $nonce ) ) {
		return 2;
	}

	/**
	 * Fires when nonce verification fails.
	 *
	 * @since 4.4.0
	 *
	 * @param string     $nonce  The invalid nonce.
	 * @param string|int $action The nonce action.
	 * @param WP_User    $user   The current user object.
	 * @param string     $token  The user's session token.
	 */
	do_action( 'wp_verify_nonce_failed', $nonce, $action, $user, $token );

	// Invalid nonce
	return false;
}
endif;

if ( !function_exists('wp_create_nonce') ) :
/**
 * Creates a cryptographic token tied to a specific action, user, user session,
 * and window of time.
 *
 * @since 2.0.3
 * @since 4.0.0 Session tokens were integrated with nonce creation
 *
 * @param string|int $action Scalar value to add context to the nonce.
 * @return string The token.
 */
function wp_create_nonce($action = -1) {
	$user = wp_get_current_user();
	$uid = (int) $user->ID;
	if ( ! $uid ) {
		/** This filter is documented in wp-includes/pluggable.php */
		$uid = apply_filters( 'nonce_user_logged_out', $uid, $action );
	}

	$token = wp_get_session_token();
	$i = wp_nonce_tick();

	return substr( wp_hash( $i . '|' . $action . '|' . $uid . '|' . $token, 'nonce' ), -12, 10 );
}
endif;

if ( !function_exists('wp_salt') ) :
/**
 * Get salt to add to hashes.
 *
 * Salts are created using secret keys. Secret keys are located in two places:
 * in the database and in the wp-config.php file. The secret key in the database
 * is randomly generated and will be appended to the secret keys in wp-config.php.
 *
 * The secret keys in wp-config.php should be updated to strong, random keys to maximize
 * security. Below is an example of how the secret key constants are defined.
 * Do not paste this example directly into wp-config.php. Instead, have a
 * {@link https://api.wordpress.org/secret-key/1.1/salt/ secret key created} just
 * for you.
 *
 *     define('AUTH_KEY',         ' Xakm<o xQy rw4EMsLKM-?!T+,PFF})H4lzcW57AF0U@N@< >M%G4Yt>f`z]MON');
 *     define('SECURE_AUTH_KEY',  'LzJ}op]mr|6+![P}Ak:uNdJCJZd>(Hx.-Mh#Tz)pCIU#uGEnfFz|f ;;eU%/U^O~');
 *     define('LOGGED_IN_KEY',    '|i|Ux`9<p-h$aFf(qnT:sDO:D1P^wZ$$/Ra@miTJi9G;ddp_<q}6H1)o|a +&JCM');
 *     define('NONCE_KEY',        '%:R{[P|,s.KuMltH5}cI;/k<Gx~j!f0I)m_sIyu+&NJZ)-iO>z7X>QYR0Z_XnZ@|');
 *     define('AUTH_SALT',        'eZyT)-Naw]F8CwA*VaW#q*|.)g@o}||wf~@C-YSt}(dh_r6EbI#A,y|nU2{B#JBW');
 *     define('SECURE_AUTH_SALT', '!=oLUTXh,QW=H `}`L|9/^4-3 STz},T(w}W<I`.JjPi)<Bmf1v,HpGe}T1:Xt7n');
 *     define('LOGGED_IN_SALT',   '+XSqHc;@Q*K_b|Z?NC[3H!!EONbh.n<+=uKR:>*c(u`g~EJBf#8u#R{mUEZrozmm');
 *     define('NONCE_SALT',       'h`GXHhD>SLWVfg1(1(N{;.V!MoE(SfbA_ksP@&`+AycHcAV$+?@3q+rxV{%^VyKT');
 *
 * Salting passwords helps against tools which has stored hashed values of
 * common dictionary strings. The added values makes it harder to crack.
 *
 * @since 2.5.0
 *
 * @link https://api.wordpress.org/secret-key/1.1/salt/ Create secrets for wp-config.php
 *
 * @staticvar array $cached_salts
 * @staticvar array $duplicated_keys
 *
 * @param string $scheme Authentication scheme (auth, secure_auth, logged_in, nonce)
 * @return string Salt value
 */
function wp_salt( $scheme = 'auth' ) {
	static $cached_salts = array();
	if ( isset( $cached_salts[ $scheme ] ) ) {
		/**
		 * Filters the WordPress salt.
		 *
		 * @since 2.5.0
		 *
		 * @param string $cached_salt Cached salt for the given scheme.
		 * @param string $scheme      Authentication scheme. Values include 'auth',
		 *                            'secure_auth', 'logged_in', and 'nonce'.
		 */
		return apply_filters( 'salt', $cached_salts[ $scheme ], $scheme );
	}

	static $duplicated_keys;
	if ( null === $duplicated_keys ) {
		$duplicated_keys = array( 'put your unique phrase here' => true );
		foreach ( array( 'AUTH', 'SECURE_AUTH', 'LOGGED_IN', 'NONCE', 'SECRET' ) as $first ) {
			foreach ( array( 'KEY', 'SALT' ) as $second ) {
				if ( ! defined( "{$first}_{$second}" ) ) {
					continue;
				}
				$value = constant( "{$first}_{$second}" );
				$duplicated_keys[ $value ] = isset( $duplicated_keys[ $value ] );
			}
		}
	}

	$values = array(
		'key' => '',
		'salt' => ''
	);
	if ( defined( 'SECRET_KEY' ) && SECRET_KEY && empty( $duplicated_keys[ SECRET_KEY ] ) ) {
		$values['key'] = SECRET_KEY;
	}
	if ( 'auth' == $scheme && defined( 'SECRET_SALT' ) && SECRET_SALT && empty( $duplicated_keys[ SECRET_SALT ] ) ) {
		$values['salt'] = SECRET_SALT;
	}

	if ( in_array( $scheme, array( 'auth', 'secure_auth', 'logged_in', 'nonce' ) ) ) {
		foreach ( array( 'key', 'salt' ) as $type ) {
			$const = strtoupper( "{$scheme}_{$type}" );
			if ( defined( $const ) && constant( $const ) && empty( $duplicated_keys[ constant( $const ) ] ) ) {
				$values[ $type ] = constant( $const );
			} elseif ( ! $values[ $type ] ) {
				$values[ $type ] = get_site_option( "{$scheme}_{$type}" );
				if ( ! $values[ $type ] ) {
					$values[ $type ] = wp_generate_password( 64, true, true );
					update_site_option( "{$scheme}_{$type}", $values[ $type ] );
				}
			}
		}
	} else {
		if ( ! $values['key'] ) {
			$values['key'] = get_site_option( 'secret_key' );
			if ( ! $values['key'] ) {
				$values['key'] = wp_generate_password( 64, true, true );
				update_site_option( 'secret_key', $values['key'] );
			}
		}
		$values['salt'] = hash_hmac( 'md5', $scheme, $values['key'] );
	}

	$cached_salts[ $scheme ] = $values['key'] . $values['salt'];

	/** This filter is documented in wp-includes/pluggable.php */
	return apply_filters( 'salt', $cached_salts[ $scheme ], $scheme );
}
endif;

if ( !function_exists('wp_hash') ) :
/**
 * Get hash of given string.
 *
 * @since 2.0.3
 *
 * @param string $data   Plain text to hash
 * @param string $scheme Authentication scheme (auth, secure_auth, logged_in, nonce)
 * @return string Hash of $data
 */
function wp_hash($data, $scheme = 'auth') {
	$salt = wp_salt($scheme);

	return hash_hmac('md5', $data, $salt);
}
endif;

if ( !function_exists('wp_hash_password') ) :
/**
 * Create a hash (encrypt) of a plain text password.
 *
 * For integration with other applications, this function can be overwritten to
 * instead use the other package password checking algorithm.
 *
 * @since 2.5.0
 *
 * @global PasswordHash $wp_hasher PHPass object
 *
 * @param string $password Plain text user password to hash
 * @return string The hash string of the password
 */
function wp_hash_password($password) {
	global $wp_hasher;

	if ( empty($wp_hasher) ) {
		// By default, use the portable hash from phpass
		$wp_hasher = new PasswordHash(8, true);
	}

	return $wp_hasher->HashPassword( trim( $password ) );
}
endif;

if ( !function_exists('wp_check_password') ) :
/**
 * Checks the plaintext password against the encrypted Password.
 *
 * Maintains compatibility between old version and the new cookie authentication
 * protocol using PHPass library. The $hash parameter is the encrypted password
 * and the function compares the plain text password when encrypted similarly
 * against the already encrypted password to see if they match.
 *
 * For integration with other applications, this function can be overwritten to
 * instead use the other package password checking algorithm.
 *
 * @since 2.5.0
 *
 * @global PasswordHash $wp_hasher PHPass object used for checking the password
 *	against the $hash + $password
 * @uses PasswordHash::CheckPassword
 *
 * @param string     $password Plaintext user's password
 * @param string     $hash     Hash of the user's password to check against.
 * @param string|int $user_id  Optional. User ID.
 * @return bool False, if the $password does not match the hashed password
 */
function wp_check_password($password, $hash, $user_id = '') {
	global $wp_hasher;

	// If the hash is still md5...
	if ( strlen($hash) <= 32 ) {
		$check = hash_equals( $hash, md5( $password ) );
		if ( $check && $user_id ) {
			// Rehash using new hash.
			wp_set_password($password, $user_id);
			$hash = wp_hash_password($password);
		}

		/**
		 * Filters whether the plaintext password matches the encrypted password.
		 *
		 * @since 2.5.0
		 *
		 * @param bool       $check    Whether the passwords match.
		 * @param string     $password The plaintext password.
		 * @param string     $hash     The hashed password.
		 * @param string|int $user_id  User ID. Can be empty.
		 */
		return apply_filters( 'check_password', $check, $password, $hash, $user_id );
	}

	// If the stored hash is longer than an MD5, presume the
	// new style phpass portable hash.
	if ( empty($wp_hasher) ) {
		// By default, use the portable hash from phpass
		$wp_hasher = new PasswordHash(8, true);
	}

	$check = $wp_hasher->CheckPassword($password, $hash);

	/** This filter is documented in wp-includes/pluggable.php */
	return apply_filters( 'check_password', $check, $password, $hash, $user_id );
}
endif;

if ( !function_exists('wp_generate_password') ) :
/**
 * Generates a random password drawn from the defined set of characters.
 *
 * @since 2.5.0
 *
 * @param int  $length              Optional. The length of password to generate. Default 12.
 * @param bool $special_chars       Optional. Whether to include standard special characters.
 *                                  Default true.
 * @param bool $extra_special_chars Optional. Whether to include other special characters.
 *                                  Used when generating secret keys and salts. Default false.
 * @return string The random password.
 */
function wp_generate_password( $length = 12, $special_chars = true, $extra_special_chars = false ) {
	$chars = 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789';
	if ( $special_chars )
		$chars .= '!@#$%^&*()';
	if ( $extra_special_chars )
		$chars .= '-_ []{}<>~`+=,.;:/?|';

	$password = '';
	for ( $i = 0; $i < $length; $i++ ) {
		$password .= substr($chars, wp_rand(0, strlen($chars) - 1), 1);
	}

	/**
	 * Filters the randomly-generated password.
	 *
	 * @since 3.0.0
	 *
	 * @param string $password The generated password.
	 */
	return apply_filters( 'random_password', $password );
}
endif;

if ( !function_exists('wp_rand') ) :
/**
 * Generates a random number
 *
 * @since 2.6.2
 * @since 4.4.0 Uses PHP7 random_int() or the random_compat library if available.
 *
 * @global string $rnd_value
 * @staticvar string $seed
 * @staticvar bool $external_rand_source_available
 *
 * @param int $min Lower limit for the generated number
 * @param int $max Upper limit for the generated number
 * @return int A random number between min and max
 */
function wp_rand( $min = 0, $max = 0 ) {
	global $rnd_value;

	// Some misconfigured 32bit environments (Entropy PHP, for example) truncate integers larger than PHP_INT_MAX to PHP_INT_MAX rather than overflowing them to floats.
	$max_random_number = 3000000000 === 2147483647 ? (float) "4294967295" : 4294967295; // 4294967295 = 0xffffffff

	// We only handle Ints, floats are truncated to their integer value.
	$min = (int) $min;
	$max = (int) $max;

	// Use PHP's CSPRNG, or a compatible method
	static $use_random_int_functionality = true;
	if ( $use_random_int_functionality ) {
		try {
			$_max = ( 0 != $max ) ? $max : $max_random_number;
			// wp_rand() can accept arguments in either order, PHP cannot.
			$_max = max( $min, $_max );
			$_min = min( $min, $_max );
			$val = random_int( $_min, $_max );
			if ( false !== $val ) {
				return absint( $val );
			} else {
				$use_random_int_functionality = false;
			}
		} catch ( Error $e ) {
			$use_random_int_functionality = false;
		} catch ( Exception $e ) {
			$use_random_int_functionality = false;
		}
	}

	// Reset $rnd_value after 14 uses
	// 32(md5) + 40(sha1) + 40(sha1) / 8 = 14 random numbers from $rnd_value
	if ( strlen($rnd_value) < 8 ) {
		if ( defined( 'WP_SETUP_CONFIG' ) )
			static $seed = '';
		else
			$seed = get_transient('random_seed');
		$rnd_value = md5( uniqid(microtime() . mt_rand(), true ) . $seed );
		$rnd_value .= sha1($rnd_value);
		$rnd_value .= sha1($rnd_value . $seed);
		$seed = md5($seed . $rnd_value);
		if ( ! defined( 'WP_SETUP_CONFIG' ) && ! defined( 'WP_INSTALLING' ) ) {
			set_transient( 'random_seed', $seed );
		}
	}

	// Take the first 8 digits for our value
	$value = substr($rnd_value, 0, 8);

	// Strip the first eight, leaving the remainder for the next call to wp_rand().
	$rnd_value = substr($rnd_value, 8);

	$value = abs(hexdec($value));

	// Reduce the value to be within the min - max range
	if ( $max != 0 )
		$value = $min + ( $max - $min + 1 ) * $value / ( $max_random_number + 1 );

	return abs(intval($value));
}
endif;

if ( !function_exists('wp_set_password') ) :
/**
 * Updates the user's password with a new encrypted one.
 *
 * For integration with other applications, this function can be overwritten to
 * instead use the other package password checking algorithm.
 *
 * Please note: This function should be used sparingly and is really only meant for single-time
 * application. Leveraging this improperly in a plugin or theme could result in an endless loop
 * of password resets if precautions are not taken to ensure it does not execute on every page load.
 *
 * @since 2.5.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * @param string $password The plaintext new user password
 * @param int    $user_id  User ID
 */
function wp_set_password( $password, $user_id ) {
	global $wpdb;

	$hash = wp_hash_password( $password );
	$wpdb->update($wpdb->users, array('user_pass' => $hash, 'user_activation_key' => ''), array('ID' => $user_id) );

	wp_cache_delete($user_id, 'users');
}
endif;

if ( !function_exists( 'get_avatar' ) ) :
/**
 * Retrieve the avatar `<img>` tag for a user, email address, MD5 hash, comment, or post.
 *
 * @since 2.5.0
 * @since 4.2.0 Optional `$args` parameter added.
 *
 * @param mixed $id_or_email The Gravatar to retrieve. Accepts a user_id, gravatar md5 hash,
 *                           user email, WP_User object, WP_Post object, or WP_Comment object.
 * @param int    $size       Optional. Height and width of the avatar image file in pixels. Default 96.
 * @param string $default    Optional. URL for the default image or a default type. Accepts '404'
 *                           (return a 404 instead of a default image), 'retro' (8bit), 'monsterid'
 *                           (monster), 'wavatar' (cartoon face), 'indenticon' (the "quilt"),
 *                           'mystery', 'mm', or 'mysteryman' (The Oyster Man), 'blank' (transparent GIF),
 *                           or 'gravatar_default' (the Gravatar logo). Default is the value of the
 *                           'avatar_default' option, with a fallback of 'mystery'.
 * @param string $alt        Optional. Alternative text to use in &lt;img&gt; tag. Default empty.
 * @param array  $args       {
 *     Optional. Extra arguments to retrieve the avatar.
 *
 *     @type int          $height        Display height of the avatar in pixels. Defaults to $size.
 *     @type int          $width         Display width of the avatar in pixels. Defaults to $size.
 *     @type bool         $force_default Whether to always show the default image, never the Gravatar. Default false.
 *     @type string       $rating        What rating to display avatars up to. Accepts 'G', 'PG', 'R', 'X', and are
 *                                       judged in that order. Default is the value of the 'avatar_rating' option.
 *     @type string       $scheme        URL scheme to use. See set_url_scheme() for accepted values.
 *                                       Default null.
 *     @type array|string $class         Array or string of additional classes to add to the &lt;img&gt; element.
 *                                       Default null.
 *     @type bool         $force_display Whether to always show the avatar - ignores the show_avatars option.
 *                                       Default false.
 *     @type string       $extra_attr    HTML attributes to insert in the IMG element. Is not sanitized. Default empty.
 * }
 * @return false|string `<img>` tag for the user's avatar. False on failure.
 */
function get_avatar( $id_or_email, $size = 96, $default = '', $alt = '', $args = null ) {
	$defaults = array(
		// get_avatar_data() args.
		'size'          => 96,
		'height'        => null,
		'width'         => null,
		'default'       => get_option( 'avatar_default', 'mystery' ),
		'force_default' => false,
		'rating'        => get_option( 'avatar_rating' ),
		'scheme'        => null,
		'alt'           => '',
		'class'         => null,
		'force_display' => false,
		'extra_attr'    => '',
	);

	if ( empty( $args ) ) {
		$args = array();
	}

	$args['size']    = (int) $size;
	$args['default'] = $default;
	$args['alt']     = $alt;

	$args = wp_parse_args( $args, $defaults );

	if ( empty( $args['height'] ) ) {
		$args['height'] = $args['size'];
	}
	if ( empty( $args['width'] ) ) {
		$args['width'] = $args['size'];
	}

	if ( is_object( $id_or_email ) && isset( $id_or_email->comment_ID ) ) {
		$id_or_email = get_comment( $id_or_email );
	}

	/**
	 * Filters whether to retrieve the avatar URL early.
	 *
	 * Passing a non-null value will effectively short-circuit get_avatar(), passing
	 * the value through the {@see 'get_avatar'} filter and returning early.
	 *
	 * @since 4.2.0
	 *
	 * @param string $avatar      HTML for the user's avatar. Default null.
	 * @param mixed  $id_or_email The Gravatar to retrieve. Accepts a user_id, gravatar md5 hash,
	 *                            user email, WP_User object, WP_Post object, or WP_Comment object.
	 * @param array  $args        Arguments passed to get_avatar_url(), after processing.
	 */
	$avatar = apply_filters( 'pre_get_avatar', null, $id_or_email, $args );

	if ( ! is_null( $avatar ) ) {
		/** This filter is documented in wp-includes/pluggable.php */
		return apply_filters( 'get_avatar', $avatar, $id_or_email, $args['size'], $args['default'], $args['alt'], $args );
	}

	if ( ! $args['force_display'] && ! get_option( 'show_avatars' ) ) {
		return false;
	}

	$url2x = get_avatar_url( $id_or_email, array_merge( $args, array( 'size' => $args['size'] * 2 ) ) );

	$args = get_avatar_data( $id_or_email, $args );

	$url = $args['url'];

	if ( ! $url || is_wp_error( $url ) ) {
		return false;
	}

	$class = array( 'avatar', 'avatar-' . (int) $args['size'], 'photo' );

	if ( ! $args['found_avatar'] || $args['force_default'] ) {
		$class[] = 'avatar-default';
	}

	if ( $args['class'] ) {
		if ( is_array( $args['class'] ) ) {
			$class = array_merge( $class, $args['class'] );
		} else {
			$class[] = $args['class'];
		}
	}

	$avatar = sprintf(
		"<img alt='%s' src='%s' srcset='%s' class='%s' height='%d' width='%d' %s/>",
		esc_attr( $args['alt'] ),
		esc_url( $url ),
		esc_attr( "$url2x 2x" ),
		esc_attr( join( ' ', $class ) ),
		(int) $args['height'],
		(int) $args['width'],
		$args['extra_attr']
	);

	/**
	 * Filters the avatar to retrieve.
	 *
	 * @since 2.5.0
	 * @since 4.2.0 The `$args` parameter was added.
	 *
	 * @param string $avatar      &lt;img&gt; tag for the user's avatar.
	 * @param mixed  $id_or_email The Gravatar to retrieve. Accepts a user_id, gravatar md5 hash,
	 *                            user email, WP_User object, WP_Post object, or WP_Comment object.
	 * @param int    $size        Square avatar width and height in pixels to retrieve.
	 * @param string $alt         Alternative text to use in the avatar image tag.
	 *                                       Default empty.
	 * @param array  $args        Arguments passed to get_avatar_data(), after processing.
	 */
	return apply_filters( 'get_avatar', $avatar, $id_or_email, $args['size'], $args['default'], $args['alt'], $args );
}
endif;

if ( !function_exists( 'wp_text_diff' ) ) :
/**
 * Displays a human readable HTML representation of the difference between two strings.
 *
 * The Diff is available for getting the changes between versions. The output is
 * HTML, so the primary use is for displaying the changes. If the two strings
 * are equivalent, then an empty string will be returned.
 *
 * The arguments supported and can be changed are listed below.
 *
 * 'title' : Default is an empty string. Titles the diff in a manner compatible
 *		with the output.
 * 'title_left' : Default is an empty string. Change the HTML to the left of the
 *		title.
 * 'title_right' : Default is an empty string. Change the HTML to the right of
 *		the title.
 *
 * @since 2.6.0
 *
 * @see wp_parse_args() Used to change defaults to user defined settings.
 * @uses Text_Diff
 * @uses WP_Text_Diff_Renderer_Table
 *
 * @param string       $left_string  "old" (left) version of string
 * @param string       $right_string "new" (right) version of string
 * @param string|array $args         Optional. Change 'title', 'title_left', and 'title_right' defaults.
 * @return string Empty string if strings are equivalent or HTML with differences.
 */
function wp_text_diff( $left_string, $right_string, $args = null ) {
	$defaults = array( 'title' => '', 'title_left' => '', 'title_right' => '' );
	$args = wp_parse_args( $args, $defaults );

	if ( ! class_exists( 'WP_Text_Diff_Renderer_Table', false ) )
		require( ABSPATH . WPINC . '/wp-diff.php' );

	$left_string  = normalize_whitespace($left_string);
	$right_string = normalize_whitespace($right_string);

	$left_lines  = explode("\n", $left_string);
	$right_lines = explode("\n", $right_string);
	$text_diff = new Text_Diff($left_lines, $right_lines);
	$renderer  = new WP_Text_Diff_Renderer_Table( $args );
	$diff = $renderer->render($text_diff);

	if ( !$diff )
		return '';

	$r  = "<table class='diff'>\n";

	if ( ! empty( $args[ 'show_split_view' ] ) ) {
		$r .= "<col class='content diffsplit left' /><col class='content diffsplit middle' /><col class='content diffsplit right' />";
	} else {
		$r .= "<col class='content' />";
	}

	if ( $args['title'] || $args['title_left'] || $args['title_right'] )
		$r .= "<thead>";
	if ( $args['title'] )
		$r .= "<tr class='diff-title'><th colspan='4'>$args[title]</th></tr>\n";
	if ( $args['title_left'] || $args['title_right'] ) {
		$r .= "<tr class='diff-sub-title'>\n";
		$r .= "\t<td></td><th>$args[title_left]</th>\n";
		$r .= "\t<td></td><th>$args[title_right]</th>\n";
		$r .= "</tr>\n";
	}
	if ( $args['title'] || $args['title_left'] || $args['title_right'] )
		$r .= "</thead>\n";

	$r .= "<tbody>\n$diff\n</tbody>\n";
	$r .= "</table>";

	return $r;
}
endif;

B Ge Team File Manager Version 1.0, Coded By Little Wei
Email: null