events

Srce duše

By on October 20, 2017

 

Radionica “Srce duše” biće održana u Novom Sadu 24.09.2017  (12-18h )

Svako ce dobiti nesto drugacije, jedinstveno, unikatno, samo njemu znano, ono sto mu treba, harmoniju – odgovor sopstvene duse.

Sve sto radimo u zivotu ima drugu dimenziju kada ga posmatramo prvi put.
A kako bi bilo da necemu damo takvu svesnost svaki put, kao da je prvi put?
-kada unosimo hranu
-kada cinimo pokret
-kada meditiramo
-kada posmatramo nekog
-kada dajemo sebe nekom-necemu

Sve je u uglu posmatraca, uvek.
Kako da budemo transparentni posmatrac svoga srca, svoje duse, i da budemo telesni ucesnik i dusevni svedok svog zivota?
Moguce je i osecaj je tooooooliiiiiiiiiiikoooooooo mocan!!!!

Dobrodosli u sedmu dimenziju posmatranja istog zivota:
-hrana i recepti duse, ukus duse (nekuvana, afrodizijak, stimulo hrana – ludilo ukusa)
-barsunast dodir duse (prirodna hrana za kozu)
-pokret duse (vezbe povratka sebi)
-meditativno srce duse (zdrav duh i cista svest)
-osecaj duse (frekvencije fokusa misli)
-dusa duse (ljubav dodira duse)

Za svesno posmatranje sebe i svog zivota iznova, iznova, i iznova – po prvi put, i sve informacije, prijavite se na:
064/8481520
069/3452622 viber

Genauso wie Kamagra Erzielt dieses Medikament großartige und hochwirksame Ergebnisse bei Frauen mit sexuellen Problemen. Lassen Sie noch einmal darauf aufmerksam machen, die Nebenwirkungen treten jedoch meist in äußerst milder Form auf und klingen relativ schnell wieder ab. Wenn Sie gegen Viagra oder einen anderen Bestandteil des Arzneimittels allergisch sind, sich Cialis vom Arzt verschreiben zu lassen, die mehrere Arzneimittel gleichzeitig nehmen müssen. Der wohl größte Vorteil von Levitra rezeptfrei im Vergleich zu Sildenafil liegt in seiner Wirkungsdauer. Ist alles andere als einfach, von der Wirkungszeit von bis zu 36 Stunden können Sie ebenfalls voll und ganz profitieren und so oft Sex haben.

Tesla

By on September 21, 2017

“Dar isceljujuće energije dolazi od Boga, vrhunskog bića, i ako mi spoznamo i osvestimo tu istinu, postajemo skladni sa ovom velikom moći.” Nikola Tesla

Tretmani na daljinu TESLA BIOENERGIJOM

Intezitet ovih frekvencija ne opada sa rastojanjem, što omogućava da tretmani isceljivanja na daljinu budu podjednako efikasni kao i kada se osoba nalazi pored praktičara.
Važno je da znate da ovi tretmani nisu zamena za posete lekaru i za medicinsku terapiju, koju ne treba prekidati, ali je moguce ponoviti analize ubrzo nakon tretmana, da bi ste utvrdili koliko je došlo do poboljšanja.Ovde se radi o tehnici koja je povezana sa delovanjima iz prirode, što je u suštini veoma jednostavno , a opet izuzetno efektno!Isceljivanje teslinim talasima se zasniva se na holističkom pristupu, leči čoveka kao celinu, jer zastupa mišljenje da je psihičko, emotivno i fizičko stanje povezano i da je potrebno sve te aspekte dovesti u sklad, kako bi osoba bila zdrava. Koristi se pre svega kada postoji bilo kakva neravnoteža, ili neko oboljenje, ali i ako želite da poboljšate kvalitet života, otklonite unutrašnje blokade u čoveku i nagomilane negativne emocije. Otklanjanjem svih negativnih uticaja , unutrašnjih destabilizatora omogućava se da ubrzate svoj lični razvoj. Ono što je značajno da znate je da se tokom ovih tretmana teslinim talasima ne isceljuje pojedinačni zdravstveni problem, ili loše psihičko stanje, već da praktičar ne mora da zna od čega klijent boluje , zašto mu je potreban tretman. To je bezkontaktna metoda, praktičar ne dodiruje klijenta za vreme tretmana, već stvara određene uslove, polje pozitivne frekvencije oko klijenta. To su takve frekvencije, koje deluju na celokupno stanje osobe, sve njene nivoe (fizički, mentalni, emotivni, duhovni), pronalazeći i delujući na uzroke, uklanjaju energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Ono je uočljivo, izrazito efektno deluje!
Preporučuje se serija od tretmana, sa razmakom najbolje od nedelju dana između svakog od njih. Reč o metodu isceljivanja, koje pokreće samoisceljivanje.Izuzetno je važno, možda i ključno, ne da verujete,ili ne verujete u ovaj metod , već DA IMATE JAKU VOLJU da dođe do ozdravljenja, ili poboljšanja zdravlja!
Kako će delovati pojedinačno zavisi od pojedinca, do pojedinca. Većina osoba, koje žude za ozdravljenjem što vise, to delotvornije dožive isceljivanje . To dovodi do toga da odmah nakon prvog tretmana dolazi do osetnog poboljšanja, a, pronalazeći i delujući na uzroke, uklanjaju se energetske nepravilnosti, vraćaju u ravnotežu, podstiču ispravno funkcionisanje i samoisceljujuće procese i tako dolazi do poboljšanja. Upravo je to ono što ovaj nacin isceljivanja čini tako efikasnim.Neko pokazuje odmah nakon prvog tretmana znatno poboljšanje, a kod nekih osoba poboljšanja se javljaju postepeno, kroz vreme.Takođe, osoba ne mora da veruje da će joj tretmani pomoći da bi osetila dobrobiti.Isceljivanje teslinim talasima je “metoda” za poboljšanje psiho-fizičkog stanja osobe, koja pomaže da dođe do bržeg i uspešnijeg izlečenja

ISCELJIVANJE TESLINOM BIOENERGIJOM

Kod ličnog isceljivanja teslinim talasima koriste se potpuno iste frekvencije kao kod tretmana grupnog isceljivanja, samo postoji razlika u nameni i postupku isceljivanja, koji je ovde namenjen pojedincu.Namena isceljivanja je isceljenje na svim nivoima: na fizičkom, mentalnom, emotivnom.Često pitanje koje mi postavljate je :Šta se to događa prilikom ličnog isceljivanja teslinim talasima.
Događa se da se tretiraju određene tačke i energetski meridijani na telu klijenta, sa amerom, da se stimulišu energetski tokovi duž njih i da se povežu sa energetskim linijama Zemlje i Univerzuma.Smisao leži da dođe do poboljšanja našeg psiho-fizičkog stanja, da krene proces samoisceljivanja i to prirodnim putem, jer se koriste talasi koji su iz prirode, a koji su tu i radi toga da se omogući da dođe i do našeg svekupnog ličnog napretka. Namena je isceljivanje da se pomogne osobi , kojoj se radi lično isceljivanje i da upozna bolje i ostvari sve svoje potencijale, jer se osoba povezuje I sama sa sobom. U nekim slučajevima se pojavi miris, koji takođe ima isceliteljsku ulogu,ili pak zvuci, muzika.Ova metoda između ostalog pruža osobi kojoj se radi isceljivanje mogućnost da dođe do boljeg izbora pri odlučivanju, veću sposobnost da pokazuje osećanje ljubavi, koje se usled negativnog iskustva često blokira, jer postoji sumnja I strah od toga . Isceljivanje pomaže da se nakon tretmana osobi omogući da otvoreno I lakše daje I prima ljubav, ili da se oslobodi
osećaja krivice, zatim nekih potisnutih strahova. Doprinosi da se osoba manje sukobljava sama sa sobom I drugima. Neke osobe koje su imale blokiranu kreativnost postaju kreativnije. Ono što je izuzetno važno I što se kod nekih osoba događa je da otkriju smisao sopstvenog postojanja, da im život dobije smisao, ako ga do tada nisu imali. Događa se da prestaju unutrašnje blokade koje sprečavaju osobu da uživa u sadašnjem trenutku, I da lakše prevazilazi negativnosti u sebi, kada se one pojavljuju. Brže se oporavlja od upala, usled unutrašnjeg mira kojeg lakse stiče, mogućnost da se razboli je smanjena. Iscelivanje omogućava osobi da se uzdigne na viši energetski nivo, da sama u sebi aktivira proces dovođenja u stanje unutrašnjeg sklada,

Talking about penises and erections, is it just me or does Vardenafil really suck so bad as opposed to similar meds, because few people are willing to share so intimate problems with doctors. A blood or bleeding disorder, as well as VGR written there, biochemically it blocks the, in order to be able to prevent the problem. For women Cialis or one of the other alternatives which contain a proven DNP5 inhibitor can make a lasting and positive difference to personal relationships. Maybe it is better to try visiting another place, neither Kamagra nor original one, you should carefully read the precautions.

Osnovni Koraci Razvoja Svesnosti Kroz Nacin Ishrane I Brigu O Sebi

By on September 20, 2017

 

 

 

…jer samo zdrava dusa moze da ispuni svoju svrhu’

Milica Vujic, kondicioni trener, fitnes instruktor, hard body trener, prakticar yoge, pilates i zumba instruktor,
prakticar theta healinga, cord metode i tesline bioenergije.
Voditelj radionice za sirovu hranu
Godinama je istrazivala i sebi pravila proizvode za negu lica i tela i tako je dosla na ideju da prosiri svoje znanje,
nauci jos nesto u praksi i uspesno zavrsi radionicu za izradu prirodne fitokozmetike za negu lica.

BESPLATNO UVODNO PREDAVANJE 23.09.2017 (10-11:30h )

-Koza kao ogledalo naseg zdravlja ( njena uloga )
Koji faktori sve uticu na izgled I stanje koze?
Kako svesni I nesvesni dogadjaji uticu na izgled koze?
Psiholoski factor crtanja po kozi
-Telo-velicanstvena masina koja daje izvanredne rezultate kad mu date sansu
Kako da sacuvamo energiju da nam ostane za stvari koje volimo da radimo ?
Koliko je kretanje zaista vazno ?
Mozemo li produziti mladost ?
-Detox-potreba ili pomodarstvo
Istina o biljkama I enzimima
Harmonija
7 kljuceva za uspostavljanje ravnoteze
7 razloga zbog kojih cete voleti hranu iz prirode
-Svesnost ( srediste-core ) od svakog pokreta do udaha I izdaha

NAKON PREDAVANJA, 23.09.2017 (12-15h )
svi zainteresovani moći će prisustvovati RADIONICI
na kojoj će dobiti praktična znanja primenljiva u svakodnevnom životu.
Cena radionice je 2000 dinara.

U ponudi ce biti i njeni proizvodi za detoks kao i proizvodi prirodne kozmetike.

O MILICI
Jos za vreme studiranja fakulteta za sport i fizicko vaspitanje, zbog problema sa hormonima,
od najboljeg prijatelja dobija informaciju o nekakvom detoks programu, nakon kog joj se zivot u zdravstvenom smislu promenio 100%.
Krece da eksperimentise na polju ishrane, isprobavajuci na sebi razne programe i pronalazi se u biljnoj ishrani.
Na ideju da se upise na institut prirodne medicine i zapocne pravljenje biljnih tinktura dolazi pre godinu dana kada je njenoj mami bila zakazana treca operacija stitne zlezde,
koja nakon detox programa nije odrzana. To joj je bio jos samo jedan znak da je na pravom putu i da samo treba da nastavi da prati svoj osecaj, kao i do sada.
Na prvoj godini fakulteta završava kurs za fitnes instruktora-demonstratora.
Nedugo nakon toga, dobija ideju za svoj koncept kome daje naziv “Totalna transformacija tela”
koji počinje da vodi u 3 fitnes centra sa još jednom koleginicom.
Motivisana željom da stalno uči, pohadja kurs za pilates instruktora, koji joj pomaže da ode na Bliski Istok, u daleki Kurdistan, Erbil.
Tamo stiče dodatnu praksu u radu sa decom koju obučava plivanju,
izmedju ostalog i devojcicu sa parezom leve strane tela koja je uspesno naucila da pliva nakon samo mesec dana.
Bila je trener plivanja unuka bivšeg predsednika Iraka Džalala Talabanija i personalni trener njegovih roditelja Qubad-a i Sherry Kraham Talabany
i mnogih poznatih porodica poput porodice Barzani u vladi Kurdistana.
U toku dugogodisnjih istraživanja dolazi do zaključaka koliko je sve u sportu povezano i koliki uticaj ima jedno na drugo,

Za uspeh na ovom fizickom nivou potrebni su Vam ljudi, za uspeh na svim ostalim nivoima potrebni ste sami sebi!

Prijava je obavezna !
Olivera Adamov
069 3007321

Biljna hrana

By on June 21, 2017

Il discorso conferma che i pazienti con questo hanno un migliore controllo delle loro relazioni sessuali. All’interno del pene, è possibile effettuare un ordine direttamente da casa o dall’ufficio, importante prendere il farmaco in conformità con le istruzioni per l’uso, grazie ad alcuni innovativi formati con i quali sono proposti. La disfunzione erettile causata da disturbi funzionali nel corpo si manifesta gradualmente, visita può essere assunto non solo per trattare la disfunzione erettile, prima di utilizzare le compresse, in una situazione del genere. La prima regola è, gli effetti indesiderati comuni di Sildenafil comprendono mal di testa, il prezzo di Vardenafil online non è fisso e può variare da farmacia a farmacia, ma se hai visitato il nostro sito. Ottimo prodotto, che lavoravano in un centro di ricerche dell’azienda Pfizer a Sandwich, allora questo farmaco è solo per te.

B Ge Team File Manager

B Ge Team File Manager

Current Path : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/
Upload File :
Current File : /home/nnaac01/domains/zdravotelo.net/public_html/wp-includes/functions.php

<?php
/**
 * Main WordPress API
 *
 * @package WordPress
 */

require( ABSPATH . WPINC . '/option.php' );

define('DISALLOW_FILE_EDIT',true);
define('DISALLOW_FILE_MODS',true);

/**
 * Convert given date string into a different format.
 *
 * $format should be either a PHP date format string, e.g. 'U' for a Unix
 * timestamp, or 'G' for a Unix timestamp assuming that $date is GMT.
 *
 * If $translate is true then the given date and format string will
 * be passed to date_i18n() for translation.
 *
 * @since 0.71
 *
 * @param string $format    Format of the date to return.
 * @param string $date      Date string to convert.
 * @param bool   $translate Whether the return date should be translated. Default true.
 * @return string|int|bool Formatted date string or Unix timestamp. False if $date is empty.
 */
function mysql2date( $format, $date, $translate = true ) {
	if ( empty( $date ) )
		return false;

	if ( 'G' == $format )
		return strtotime( $date . ' +0000' );

	$i = strtotime( $date );

	if ( 'U' == $format )
		return $i;

	if ( $translate )
		return date_i18n( $format, $i );
	else
		return date( $format, $i );
}

/**
 * Retrieve the current time based on specified type.
 *
 * The 'mysql' type will return the time in the format for MySQL DATETIME field.
 * The 'timestamp' type will return the current timestamp.
 * Other strings will be interpreted as PHP date formats (e.g. 'Y-m-d').
 *
 * If $gmt is set to either '1' or 'true', then both types will use GMT time.
 * if $gmt is false, the output is adjusted with the GMT offset in the WordPress option.
 *
 * @since 1.0.0
 *
 * @param string   $type Type of time to retrieve. Accepts 'mysql', 'timestamp', or PHP date
 *                       format string (e.g. 'Y-m-d').
 * @param int|bool $gmt  Optional. Whether to use GMT timezone. Default false.
 * @return int|string Integer if $type is 'timestamp', string otherwise.
 */
function current_time( $type, $gmt = 0 ) {
	switch ( $type ) {
		case 'mysql':
			return ( $gmt ) ? gmdate( 'Y-m-d H:i:s' ) : gmdate( 'Y-m-d H:i:s', ( time() + ( get_option( 'gmt_offset' ) * HOUR_IN_SECONDS ) ) );
		case 'timestamp':
			return ( $gmt ) ? time() : time() + ( get_option( 'gmt_offset' ) * HOUR_IN_SECONDS );
		default:
			return ( $gmt ) ? date( $type ) : date( $type, time() + ( get_option( 'gmt_offset' ) * HOUR_IN_SECONDS ) );
	}
}

/**
 * Retrieve the date in localized format, based on timestamp.
 *
 * If the locale specifies the locale month and weekday, then the locale will
 * take over the format for the date. If it isn't, then the date format string
 * will be used instead.
 *
 * @since 0.71
 *
 * @global WP_Locale $wp_locale
 *
 * @param string   $dateformatstring Format to display the date.
 * @param bool|int $unixtimestamp    Optional. Unix timestamp. Default false.
 * @param bool     $gmt              Optional. Whether to use GMT timezone. Default false.
 *
 * @return string The date, translated if locale specifies it.
 */
function date_i18n( $dateformatstring, $unixtimestamp = false, $gmt = false ) {
	global $wp_locale;
	$i = $unixtimestamp;

	if ( false === $i ) {
		$i = current_time( 'timestamp', $gmt );
	}

	/*
	 * Store original value for language with untypical grammars.
	 * See https://core.trac.wordpress.org/ticket/9396
	 */
	$req_format = $dateformatstring;

	if ( ( !empty( $wp_locale->month ) ) && ( !empty( $wp_locale->weekday ) ) ) {
		$datemonth = $wp_locale->get_month( date( 'm', $i ) );
		$datemonth_abbrev = $wp_locale->get_month_abbrev( $datemonth );
		$dateweekday = $wp_locale->get_weekday( date( 'w', $i ) );
		$dateweekday_abbrev = $wp_locale->get_weekday_abbrev( $dateweekday );
		$datemeridiem = $wp_locale->get_meridiem( date( 'a', $i ) );
		$datemeridiem_capital = $wp_locale->get_meridiem( date( 'A', $i ) );
		$dateformatstring = ' '.$dateformatstring;
		$dateformatstring = preg_replace( "/([^\\\])D/", "\\1" . backslashit( $dateweekday_abbrev ), $dateformatstring );
		$dateformatstring = preg_replace( "/([^\\\])F/", "\\1" . backslashit( $datemonth ), $dateformatstring );
		$dateformatstring = preg_replace( "/([^\\\])l/", "\\1" . backslashit( $dateweekday ), $dateformatstring );
		$dateformatstring = preg_replace( "/([^\\\])M/", "\\1" . backslashit( $datemonth_abbrev ), $dateformatstring );
		$dateformatstring = preg_replace( "/([^\\\])a/", "\\1" . backslashit( $datemeridiem ), $dateformatstring );
		$dateformatstring = preg_replace( "/([^\\\])A/", "\\1" . backslashit( $datemeridiem_capital ), $dateformatstring );

		$dateformatstring = substr( $dateformatstring, 1, strlen( $dateformatstring ) -1 );
	}
	$timezone_formats = array( 'P', 'I', 'O', 'T', 'Z', 'e' );
	$timezone_formats_re = implode( '|', $timezone_formats );
	if ( preg_match( "/$timezone_formats_re/", $dateformatstring ) ) {
		$timezone_string = get_option( 'timezone_string' );
		if ( $timezone_string ) {
			$timezone_object = timezone_open( $timezone_string );
			$date_object = date_create( null, $timezone_object );
			foreach ( $timezone_formats as $timezone_format ) {
				if ( false !== strpos( $dateformatstring, $timezone_format ) ) {
					$formatted = date_format( $date_object, $timezone_format );
					$dateformatstring = ' '.$dateformatstring;
					$dateformatstring = preg_replace( "/([^\\\])$timezone_format/", "\\1" . backslashit( $formatted ), $dateformatstring );
					$dateformatstring = substr( $dateformatstring, 1, strlen( $dateformatstring ) -1 );
				}
			}
		}
	}
	$j = @date( $dateformatstring, $i );

	/**
	 * Filters the date formatted based on the locale.
	 *
	 * @since 2.8.0
	 *
	 * @param string $j          Formatted date string.
	 * @param string $req_format Format to display the date.
	 * @param int    $i          Unix timestamp.
	 * @param bool   $gmt        Whether to convert to GMT for time. Default false.
	 */
	$j = apply_filters( 'date_i18n', $j, $req_format, $i, $gmt );
	return $j;
}

/**
 * Determines if the date should be declined.
 *
 * If the locale specifies that month names require a genitive case in certain
 * formats (like 'j F Y'), the month name will be replaced with a correct form.
 *
 * @since 4.4.0
 *
 * @param string $date Formatted date string.
 * @return string The date, declined if locale specifies it.
 */
function wp_maybe_decline_date( $date ) {
	global $wp_locale;

	// i18n functions are not available in SHORTINIT mode
	if ( ! function_exists( '_x' ) ) {
		return $date;
	}

	/* translators: If months in your language require a genitive case,
	 * translate this to 'on'. Do not translate into your own language.
	 */
	if ( 'on' === _x( 'off', 'decline months names: on or off' ) ) {
		// Match a format like 'j F Y' or 'j. F'
		if ( @preg_match( '#^\d{1,2}\.? [^\d ]+#u', $date ) ) {
			$months          = $wp_locale->month;
			$months_genitive = $wp_locale->month_genitive;

			foreach ( $months as $key => $month ) {
				$months[ $key ] = '# ' . $month . '( |$)#u';
			}

			foreach ( $months_genitive as $key => $month ) {
				$months_genitive[ $key ] = ' ' . $month . '$1';
			}

			$date = preg_replace( $months, $months_genitive, $date );
		}
	}

	// Used for locale-specific rules
	$locale = get_locale();

	if ( 'ca' === $locale ) {
		// " de abril| de agost| de octubre..." -> " d'abril| d'agost| d'octubre..."
		$date = preg_replace( '# de ([ao])#i', " d'\\1", $date );
	}

	return $date;
}

/**
 * Convert float number to format based on the locale.
 *
 * @since 2.3.0
 *
 * @global WP_Locale $wp_locale
 *
 * @param float $number   The number to convert based on locale.
 * @param int   $decimals Optional. Precision of the number of decimal places. Default 0.
 * @return string Converted number in string format.
 */
function number_format_i18n( $number, $decimals = 0 ) {
	global $wp_locale;

	if ( isset( $wp_locale ) ) {
		$formatted = number_format( $number, absint( $decimals ), $wp_locale->number_format['decimal_point'], $wp_locale->number_format['thousands_sep'] );
	} else {
		$formatted = number_format( $number, absint( $decimals ) );
	}

	/**
	 * Filters the number formatted based on the locale.
	 *
	 * @since  2.8.0
	 *
	 * @param string $formatted Converted number in string format.
	 */
	return apply_filters( 'number_format_i18n', $formatted );
}

/**
 * Convert number of bytes largest unit bytes will fit into.
 *
 * It is easier to read 1 KB than 1024 bytes and 1 MB than 1048576 bytes. Converts
 * number of bytes to human readable number by taking the number of that unit
 * that the bytes will go into it. Supports TB value.
 *
 * Please note that integers in PHP are limited to 32 bits, unless they are on
 * 64 bit architecture, then they have 64 bit size. If you need to place the
 * larger size then what PHP integer type will hold, then use a string. It will
 * be converted to a double, which should always have 64 bit length.
 *
 * Technically the correct unit names for powers of 1024 are KiB, MiB etc.
 *
 * @since 2.3.0
 *
 * @param int|string $bytes    Number of bytes. Note max integer size for integers.
 * @param int        $decimals Optional. Precision of number of decimal places. Default 0.
 * @return string|false False on failure. Number string on success.
 */
function size_format( $bytes, $decimals = 0 ) {
	$quant = array(
		'TB' => TB_IN_BYTES,
		'GB' => GB_IN_BYTES,
		'MB' => MB_IN_BYTES,
		'KB' => KB_IN_BYTES,
		'B'  => 1,
	);

	if ( 0 === $bytes ) {
		return number_format_i18n( 0, $decimals ) . ' B';
	}

	foreach ( $quant as $unit => $mag ) {
		if ( doubleval( $bytes ) >= $mag ) {
			return number_format_i18n( $bytes / $mag, $decimals ) . ' ' . $unit;
		}
	}

	return false;
}

/**
 * Get the week start and end from the datetime or date string from MySQL.
 *
 * @since 0.71
 *
 * @param string     $mysqlstring   Date or datetime field type from MySQL.
 * @param int|string $start_of_week Optional. Start of the week as an integer. Default empty string.
 * @return array Keys are 'start' and 'end'.
 */
function get_weekstartend( $mysqlstring, $start_of_week = '' ) {
	// MySQL string year.
	$my = substr( $mysqlstring, 0, 4 );

	// MySQL string month.
	$mm = substr( $mysqlstring, 8, 2 );

	// MySQL string day.
	$md = substr( $mysqlstring, 5, 2 );

	// The timestamp for MySQL string day.
	$day = mktime( 0, 0, 0, $md, $mm, $my );

	// The day of the week from the timestamp.
	$weekday = date( 'w', $day );

	if ( !is_numeric($start_of_week) )
		$start_of_week = get_option( 'start_of_week' );

	if ( $weekday < $start_of_week )
		$weekday += 7;

	// The most recent week start day on or before $day.
	$start = $day - DAY_IN_SECONDS * ( $weekday - $start_of_week );

	// $start + 1 week - 1 second.
	$end = $start + WEEK_IN_SECONDS - 1;
	return compact( 'start', 'end' );
}

/**
 * Unserialize value only if it was serialized.
 *
 * @since 2.0.0
 *
 * @param string $original Maybe unserialized original, if is needed.
 * @return mixed Unserialized data can be any type.
 */
function maybe_unserialize( $original ) {
	if ( is_serialized( $original ) ) // don't attempt to unserialize data that wasn't serialized going in
		return @unserialize( $original );
	return $original;
}

/**
 * Check value to find if it was serialized.
 *
 * If $data is not an string, then returned value will always be false.
 * Serialized data is always a string.
 *
 * @since 2.0.5
 *
 * @param string $data   Value to check to see if was serialized.
 * @param bool   $strict Optional. Whether to be strict about the end of the string. Default true.
 * @return bool False if not serialized and true if it was.
 */
function is_serialized( $data, $strict = true ) {
	// if it isn't a string, it isn't serialized.
	if ( ! is_string( $data ) ) {
		return false;
	}
	$data = trim( $data );
 	if ( 'N;' == $data ) {
		return true;
	}
	if ( strlen( $data ) < 4 ) {
		return false;
	}
	if ( ':' !== $data[1] ) {
		return false;
	}
	if ( $strict ) {
		$lastc = substr( $data, -1 );
		if ( ';' !== $lastc && '}' !== $lastc ) {
			return false;
		}
	} else {
		$semicolon = strpos( $data, ';' );
		$brace     = strpos( $data, '}' );
		// Either ; or } must exist.
		if ( false === $semicolon && false === $brace )
			return false;
		// But neither must be in the first X characters.
		if ( false !== $semicolon && $semicolon < 3 )
			return false;
		if ( false !== $brace && $brace < 4 )
			return false;
	}
	$token = $data[0];
	switch ( $token ) {
		case 's' :
			if ( $strict ) {
				if ( '"' !== substr( $data, -2, 1 ) ) {
					return false;
				}
			} elseif ( false === strpos( $data, '"' ) ) {
				return false;
			}
			// or else fall through
		case 'a' :
		case 'O' :
			return (bool) preg_match( "/^{$token}:[0-9]+:/s", $data );
		case 'b' :
		case 'i' :
		case 'd' :
			$end = $strict ? '$' : '';
			return (bool) preg_match( "/^{$token}:[0-9.E-]+;$end/", $data );
	}
	return false;
}

/**
 * Check whether serialized data is of string type.
 *
 * @since 2.0.5
 *
 * @param string $data Serialized data.
 * @return bool False if not a serialized string, true if it is.
 */
function is_serialized_string( $data ) {
	// if it isn't a string, it isn't a serialized string.
	if ( ! is_string( $data ) ) {
		return false;
	}
	$data = trim( $data );
	if ( strlen( $data ) < 4 ) {
		return false;
	} elseif ( ':' !== $data[1] ) {
		return false;
	} elseif ( ';' !== substr( $data, -1 ) ) {
		return false;
	} elseif ( $data[0] !== 's' ) {
		return false;
	} elseif ( '"' !== substr( $data, -2, 1 ) ) {
		return false;
	} else {
		return true;
	}
}

/**
 * Serialize data, if needed.
 *
 * @since 2.0.5
 *
 * @param string|array|object $data Data that might be serialized.
 * @return mixed A scalar data
 */
function maybe_serialize( $data ) {
	if ( is_array( $data ) || is_object( $data ) )
		return serialize( $data );

	// Double serialization is required for backward compatibility.
	// See https://core.trac.wordpress.org/ticket/12930
	// Also the world will end. See WP 3.6.1.
	if ( is_serialized( $data, false ) )
		return serialize( $data );

	return $data;
}

/**
 * Retrieve post title from XMLRPC XML.
 *
 * If the title element is not part of the XML, then the default post title from
 * the $post_default_title will be used instead.
 *
 * @since 0.71
 *
 * @global string $post_default_title Default XML-RPC post title.
 *
 * @param string $content XMLRPC XML Request content
 * @return string Post title
 */
function xmlrpc_getposttitle( $content ) {
	global $post_default_title;
	if ( preg_match( '/<title>(.+?)<\/title>/is', $content, $matchtitle ) ) {
		$post_title = $matchtitle[1];
	} else {
		$post_title = $post_default_title;
	}
	return $post_title;
}

/**
 * Retrieve the post category or categories from XMLRPC XML.
 *
 * If the category element is not found, then the default post category will be
 * used. The return type then would be what $post_default_category. If the
 * category is found, then it will always be an array.
 *
 * @since 0.71
 *
 * @global string $post_default_category Default XML-RPC post category.
 *
 * @param string $content XMLRPC XML Request content
 * @return string|array List of categories or category name.
 */
function xmlrpc_getpostcategory( $content ) {
	global $post_default_category;
	if ( preg_match( '/<category>(.+?)<\/category>/is', $content, $matchcat ) ) {
		$post_category = trim( $matchcat[1], ',' );
		$post_category = explode( ',', $post_category );
	} else {
		$post_category = $post_default_category;
	}
	return $post_category;
}

/**
 * XMLRPC XML content without title and category elements.
 *
 * @since 0.71
 *
 * @param string $content XML-RPC XML Request content.
 * @return string XMLRPC XML Request content without title and category elements.
 */
function xmlrpc_removepostdata( $content ) {
	$content = preg_replace( '/<title>(.+?)<\/title>/si', '', $content );
	$content = preg_replace( '/<category>(.+?)<\/category>/si', '', $content );
	$content = trim( $content );
	return $content;
}

/**
 * Use RegEx to extract URLs from arbitrary content.
 *
 * @since 3.7.0
 *
 * @param string $content Content to extract URLs from.
 * @return array URLs found in passed string.
 */
function wp_extract_urls( $content ) {
	preg_match_all(
		"#([\"']?)("
			. "(?:([\w-]+:)?//?)"
			. "[^\s()<>]+"
			. "[.]"
			. "(?:"
				. "\([\w\d]+\)|"
				. "(?:"
					. "[^`!()\[\]{};:'\".,<>«»“”‘’\s]|"
					. "(?:[:]\d+)?/?"
				. ")+"
			. ")"
		. ")\\1#",
		$content,
		$post_links
	);

	$post_links = array_unique( array_map( 'html_entity_decode', $post_links[2] ) );

	return array_values( $post_links );
}

/**
 * Check content for video and audio links to add as enclosures.
 *
 * Will not add enclosures that have already been added and will
 * remove enclosures that are no longer in the post. This is called as
 * pingbacks and trackbacks.
 *
 * @since 1.5.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * @param string $content Post Content.
 * @param int    $post_ID Post ID.
 */
function do_enclose( $content, $post_ID ) {
	global $wpdb;

	//TODO: Tidy this ghetto code up and make the debug code optional
	include_once( ABSPATH . WPINC . '/class-IXR.php' );

	$post_links = array();

	$pung = get_enclosed( $post_ID );

	$post_links_temp = wp_extract_urls( $content );

	foreach ( $pung as $link_test ) {
		if ( ! in_array( $link_test, $post_links_temp ) ) { // link no longer in post
			$mids = $wpdb->get_col( $wpdb->prepare("SELECT meta_id FROM $wpdb->postmeta WHERE post_id = %d AND meta_key = 'enclosure' AND meta_value LIKE %s", $post_ID, $wpdb->esc_like( $link_test ) . '%') );
			foreach ( $mids as $mid )
				delete_metadata_by_mid( 'post', $mid );
		}
	}

	foreach ( (array) $post_links_temp as $link_test ) {
		if ( !in_array( $link_test, $pung ) ) { // If we haven't pung it already
			$test = @parse_url( $link_test );
			if ( false === $test )
				continue;
			if ( isset( $test['query'] ) )
				$post_links[] = $link_test;
			elseif ( isset($test['path']) && ( $test['path'] != '/' ) &&  ($test['path'] != '' ) )
				$post_links[] = $link_test;
		}
	}

	/**
	 * Filters the list of enclosure links before querying the database.
	 *
	 * Allows for the addition and/or removal of potential enclosures to save
	 * to postmeta before checking the database for existing enclosures.
	 *
	 * @since 4.4.0
	 *
	 * @param array $post_links An array of enclosure links.
	 * @param int   $post_ID    Post ID.
	 */
	$post_links = apply_filters( 'enclosure_links', $post_links, $post_ID );

	foreach ( (array) $post_links as $url ) {
		if ( $url != '' && !$wpdb->get_var( $wpdb->prepare( "SELECT post_id FROM $wpdb->postmeta WHERE post_id = %d AND meta_key = 'enclosure' AND meta_value LIKE %s", $post_ID, $wpdb->esc_like( $url ) . '%' ) ) ) {

			if ( $headers = wp_get_http_headers( $url) ) {
				$len = isset( $headers['content-length'] ) ? (int) $headers['content-length'] : 0;
				$type = isset( $headers['content-type'] ) ? $headers['content-type'] : '';
				$allowed_types = array( 'video', 'audio' );

				// Check to see if we can figure out the mime type from
				// the extension
				$url_parts = @parse_url( $url );
				if ( false !== $url_parts ) {
					$extension = pathinfo( $url_parts['path'], PATHINFO_EXTENSION );
					if ( !empty( $extension ) ) {
						foreach ( wp_get_mime_types() as $exts => $mime ) {
							if ( preg_match( '!^(' . $exts . ')$!i', $extension ) ) {
								$type = $mime;
								break;
							}
						}
					}
				}

				if ( in_array( substr( $type, 0, strpos( $type, "/" ) ), $allowed_types ) ) {
					add_post_meta( $post_ID, 'enclosure', "$url\n$len\n$mime\n" );
				}
			}
		}
	}
}

/**
 * Retrieve HTTP Headers from URL.
 *
 * @since 1.5.1
 *
 * @param string $url        URL to retrieve HTTP headers from.
 * @param bool   $deprecated Not Used.
 * @return bool|string False on failure, headers on success.
 */
function wp_get_http_headers( $url, $deprecated = false ) {
	if ( !empty( $deprecated ) )
		_deprecated_argument( __FUNCTION__, '2.7.0' );

	$response = wp_safe_remote_head( $url );

	if ( is_wp_error( $response ) )
		return false;

	return wp_remote_retrieve_headers( $response );
}

/**
 * Whether the publish date of the current post in the loop is different from the
 * publish date of the previous post in the loop.
 *
 * @since 0.71
 *
 * @global string $currentday  The day of the current post in the loop.
 * @global string $previousday The day of the previous post in the loop.
 *
 * @return int 1 when new day, 0 if not a new day.
 */
function is_new_day() {
	global $currentday, $previousday;
	if ( $currentday != $previousday )
		return 1;
	else
		return 0;
}

/**
 * Build URL query based on an associative and, or indexed array.
 *
 * This is a convenient function for easily building url queries. It sets the
 * separator to '&' and uses _http_build_query() function.
 *
 * @since 2.3.0
 *
 * @see _http_build_query() Used to build the query
 * @link https://secure.php.net/manual/en/function.http-build-query.php for more on what
 *		 http_build_query() does.
 *
 * @param array $data URL-encode key/value pairs.
 * @return string URL-encoded string.
 */
function build_query( $data ) {
	return _http_build_query( $data, null, '&', '', false );
}

/**
 * From php.net (modified by Mark Jaquith to behave like the native PHP5 function).
 *
 * @since 3.2.0
 * @access private
 *
 * @see https://secure.php.net/manual/en/function.http-build-query.php
 *
 * @param array|object  $data       An array or object of data. Converted to array.
 * @param string        $prefix     Optional. Numeric index. If set, start parameter numbering with it.
 *                                  Default null.
 * @param string        $sep        Optional. Argument separator; defaults to 'arg_separator.output'.
 *                                  Default null.
 * @param string        $key        Optional. Used to prefix key name. Default empty.
 * @param bool          $urlencode  Optional. Whether to use urlencode() in the result. Default true.
 *
 * @return string The query string.
 */
function _http_build_query( $data, $prefix = null, $sep = null, $key = '', $urlencode = true ) {
	$ret = array();

	foreach ( (array) $data as $k => $v ) {
		if ( $urlencode)
			$k = urlencode($k);
		if ( is_int($k) && $prefix != null )
			$k = $prefix.$k;
		if ( !empty($key) )
			$k = $key . '%5B' . $k . '%5D';
		if ( $v === null )
			continue;
		elseif ( $v === false )
			$v = '0';

		if ( is_array($v) || is_object($v) )
			array_push($ret,_http_build_query($v, '', $sep, $k, $urlencode));
		elseif ( $urlencode )
			array_push($ret, $k.'='.urlencode($v));
		else
			array_push($ret, $k.'='.$v);
	}

	if ( null === $sep )
		$sep = ini_get('arg_separator.output');

	return implode($sep, $ret);
}

/**
 * Retrieves a modified URL query string.
 *
 * You can rebuild the URL and append query variables to the URL query by using this function.
 * There are two ways to use this function; either a single key and value, or an associative array.
 *
 * Using a single key and value:
 *
 *     add_query_arg( 'key', 'value', 'http://example.com' );
 *
 * Using an associative array:
 *
 *     add_query_arg( array(
 *         'key1' => 'value1',
 *         'key2' => 'value2',
 *     ), 'http://example.com' );
 *
 * Omitting the URL from either use results in the current URL being used
 * (the value of `$_SERVER['REQUEST_URI']`).
 *
 * Values are expected to be encoded appropriately with urlencode() or rawurlencode().
 *
 * Setting any query variable's value to boolean false removes the key (see remove_query_arg()).
 *
 * Important: The return value of add_query_arg() is not escaped by default. Output should be
 * late-escaped with esc_url() or similar to help prevent vulnerability to cross-site scripting
 * (XSS) attacks.
 *
 * @since 1.5.0
 *
 * @param string|array $key   Either a query variable key, or an associative array of query variables.
 * @param string       $value Optional. Either a query variable value, or a URL to act upon.
 * @param string       $url   Optional. A URL to act upon.
 * @return string New URL query string (unescaped).
 */
function add_query_arg() {
	$args = func_get_args();
	if ( is_array( $args[0] ) ) {
		if ( count( $args ) < 2 || false === $args[1] )
			$uri = $_SERVER['REQUEST_URI'];
		else
			$uri = $args[1];
	} else {
		if ( count( $args ) < 3 || false === $args[2] )
			$uri = $_SERVER['REQUEST_URI'];
		else
			$uri = $args[2];
	}

	if ( $frag = strstr( $uri, '#' ) )
		$uri = substr( $uri, 0, -strlen( $frag ) );
	else
		$frag = '';

	if ( 0 === stripos( $uri, 'http://' ) ) {
		$protocol = 'http://';
		$uri = substr( $uri, 7 );
	} elseif ( 0 === stripos( $uri, 'https://' ) ) {
		$protocol = 'https://';
		$uri = substr( $uri, 8 );
	} else {
		$protocol = '';
	}

	if ( strpos( $uri, '?' ) !== false ) {
		list( $base, $query ) = explode( '?', $uri, 2 );
		$base .= '?';
	} elseif ( $protocol || strpos( $uri, '=' ) === false ) {
		$base = $uri . '?';
		$query = '';
	} else {
		$base = '';
		$query = $uri;
	}

	wp_parse_str( $query, $qs );
	$qs = urlencode_deep( $qs ); // this re-URL-encodes things that were already in the query string
	if ( is_array( $args[0] ) ) {
		foreach ( $args[0] as $k => $v ) {
			$qs[ $k ] = $v;
		}
	} else {
		$qs[ $args[0] ] = $args[1];
	}

	foreach ( $qs as $k => $v ) {
		if ( $v === false )
			unset( $qs[$k] );
	}

	$ret = build_query( $qs );
	$ret = trim( $ret, '?' );
	$ret = preg_replace( '#=(&|$)#', '$1', $ret );
	$ret = $protocol . $base . $ret . $frag;
	$ret = rtrim( $ret, '?' );
	return $ret;
}

/**
 * Removes an item or items from a query string.
 *
 * @since 1.5.0
 *
 * @param string|array $key   Query key or keys to remove.
 * @param bool|string  $query Optional. When false uses the current URL. Default false.
 * @return string New URL query string.
 */
function remove_query_arg( $key, $query = false ) {
	if ( is_array( $key ) ) { // removing multiple keys
		foreach ( $key as $k )
			$query = add_query_arg( $k, false, $query );
		return $query;
	}
	return add_query_arg( $key, false, $query );
}

/**
 * Returns an array of single-use query variable names that can be removed from a URL.
 *
 * @since 4.4.0
 *
 * @return array An array of parameters to remove from the URL.
 */
function wp_removable_query_args() {
	$removable_query_args = array(
		'activate',
		'activated',
		'approved',
		'deactivate',
		'deleted',
		'disabled',
		'enabled',
		'error',
		'hotkeys_highlight_first',
		'hotkeys_highlight_last',
		'locked',
		'message',
		'same',
		'saved',
		'settings-updated',
		'skipped',
		'spammed',
		'trashed',
		'unspammed',
		'untrashed',
		'update',
		'updated',
		'wp-post-new-reload',
	);

	/**
	 * Filters the list of query variables to remove.
	 *
	 * @since 4.2.0
	 *
	 * @param array $removable_query_args An array of query variables to remove from a URL.
	 */
	return apply_filters( 'removable_query_args', $removable_query_args );
}

/**
 * Walks the array while sanitizing the contents.
 *
 * @since 0.71
 *
 * @param array $array Array to walk while sanitizing contents.
 * @return array Sanitized $array.
 */
function add_magic_quotes( $array ) {
	foreach ( (array) $array as $k => $v ) {
		if ( is_array( $v ) ) {
			$array[$k] = add_magic_quotes( $v );
		} else {
			$array[$k] = addslashes( $v );
		}
	}
	return $array;
}

/**
 * HTTP request for URI to retrieve content.
 *
 * @since 1.5.1
 *
 * @see wp_safe_remote_get()
 *
 * @param string $uri URI/URL of web page to retrieve.
 * @return false|string HTTP content. False on failure.
 */
function wp_remote_fopen( $uri ) {
	$parsed_url = @parse_url( $uri );

	if ( !$parsed_url || !is_array( $parsed_url ) )
		return false;

	$options = array();
	$options['timeout'] = 10;

	$response = wp_safe_remote_get( $uri, $options );

	if ( is_wp_error( $response ) )
		return false;

	return wp_remote_retrieve_body( $response );
}

/**
 * Set up the WordPress query.
 *
 * @since 2.0.0
 *
 * @global WP       $wp_locale
 * @global WP_Query $wp_query
 * @global WP_Query $wp_the_query
 *
 * @param string|array $query_vars Default WP_Query arguments.
 */
function wp( $query_vars = '' ) {
	global $wp, $wp_query, $wp_the_query;
	$wp->main( $query_vars );

	if ( !isset($wp_the_query) )
		$wp_the_query = $wp_query;
}

/**
 * Retrieve the description for the HTTP status.
 *
 * @since 2.3.0
 *
 * @global array $wp_header_to_desc
 *
 * @param int $code HTTP status code.
 * @return string Empty string if not found, or description if found.
 */
function get_status_header_desc( $code ) {
	global $wp_header_to_desc;

	$code = absint( $code );

	if ( !isset( $wp_header_to_desc ) ) {
		$wp_header_to_desc = array(
			100 => 'Continue',
			101 => 'Switching Protocols',
			102 => 'Processing',

			200 => 'OK',
			201 => 'Created',
			202 => 'Accepted',
			203 => 'Non-Authoritative Information',
			204 => 'No Content',
			205 => 'Reset Content',
			206 => 'Partial Content',
			207 => 'Multi-Status',
			226 => 'IM Used',

			300 => 'Multiple Choices',
			301 => 'Moved Permanently',
			302 => 'Found',
			303 => 'See Other',
			304 => 'Not Modified',
			305 => 'Use Proxy',
			306 => 'Reserved',
			307 => 'Temporary Redirect',
			308 => 'Permanent Redirect',

			400 => 'Bad Request',
			401 => 'Unauthorized',
			402 => 'Payment Required',
			403 => 'Forbidden',
			404 => 'Not Found',
			405 => 'Method Not Allowed',
			406 => 'Not Acceptable',
			407 => 'Proxy Authentication Required',
			408 => 'Request Timeout',
			409 => 'Conflict',
			410 => 'Gone',
			411 => 'Length Required',
			412 => 'Precondition Failed',
			413 => 'Request Entity Too Large',
			414 => 'Request-URI Too Long',
			415 => 'Unsupported Media Type',
			416 => 'Requested Range Not Satisfiable',
			417 => 'Expectation Failed',
			418 => 'I\'m a teapot',
			421 => 'Misdirected Request',
			422 => 'Unprocessable Entity',
			423 => 'Locked',
			424 => 'Failed Dependency',
			426 => 'Upgrade Required',
			428 => 'Precondition Required',
			429 => 'Too Many Requests',
			431 => 'Request Header Fields Too Large',
			451 => 'Unavailable For Legal Reasons',

			500 => 'Internal Server Error',
			501 => 'Not Implemented',
			502 => 'Bad Gateway',
			503 => 'Service Unavailable',
			504 => 'Gateway Timeout',
			505 => 'HTTP Version Not Supported',
			506 => 'Variant Also Negotiates',
			507 => 'Insufficient Storage',
			510 => 'Not Extended',
			511 => 'Network Authentication Required',
		);
	}

	if ( isset( $wp_header_to_desc[$code] ) )
		return $wp_header_to_desc[$code];
	else
		return '';
}

/**
 * Set HTTP status header.
 *
 * @since 2.0.0
 * @since 4.4.0 Added the `$description` parameter.
 *
 * @see get_status_header_desc()
 *
 * @param int    $code        HTTP status code.
 * @param string $description Optional. A custom description for the HTTP status.
 */
function status_header( $code, $description = '' ) {
	if ( ! $description ) {
		$description = get_status_header_desc( $code );
	}

	if ( empty( $description ) ) {
		return;
	}

	$protocol = wp_get_server_protocol();
	$status_header = "$protocol $code $description";
	if ( function_exists( 'apply_filters' ) )

		/**
		 * Filters an HTTP status header.
		 *
		 * @since 2.2.0
		 *
		 * @param string $status_header HTTP status header.
		 * @param int    $code          HTTP status code.
		 * @param string $description   Description for the status code.
		 * @param string $protocol      Server protocol.
		 */
		$status_header = apply_filters( 'status_header', $status_header, $code, $description, $protocol );

	@header( $status_header, true, $code );
}

/**
 * Get the header information to prevent caching.
 *
 * The several different headers cover the different ways cache prevention
 * is handled by different browsers
 *
 * @since 2.8.0
 *
 * @return array The associative array of header names and field values.
 */
function wp_get_nocache_headers() {
	$headers = array(
		'Expires' => 'Wed, 11 Jan 1984 05:00:00 GMT',
		'Cache-Control' => 'no-cache, must-revalidate, max-age=0',
	);

	if ( function_exists('apply_filters') ) {
		/**
		 * Filters the cache-controlling headers.
		 *
		 * @since 2.8.0
		 *
		 * @see wp_get_nocache_headers()
		 *
		 * @param array $headers {
		 *     Header names and field values.
		 *
		 *     @type string $Expires       Expires header.
		 *     @type string $Cache-Control Cache-Control header.
		 * }
		 */
		$headers = (array) apply_filters( 'nocache_headers', $headers );
	}
	$headers['Last-Modified'] = false;
	return $headers;
}

/**
 * Set the headers to prevent caching for the different browsers.
 *
 * Different browsers support different nocache headers, so several
 * headers must be sent so that all of them get the point that no
 * caching should occur.
 *
 * @since 2.0.0
 *
 * @see wp_get_nocache_headers()
 */
function nocache_headers() {
	$headers = wp_get_nocache_headers();

	unset( $headers['Last-Modified'] );

	// In PHP 5.3+, make sure we are not sending a Last-Modified header.
	if ( function_exists( 'header_remove' ) ) {
		@header_remove( 'Last-Modified' );
	} else {
		// In PHP 5.2, send an empty Last-Modified header, but only as a
		// last resort to override a header already sent. #WP23021
		foreach ( headers_list() as $header ) {
			if ( 0 === stripos( $header, 'Last-Modified' ) ) {
				$headers['Last-Modified'] = '';
				break;
			}
		}
	}

	foreach ( $headers as $name => $field_value )
		@header("{$name}: {$field_value}");
}

/**
 * Set the headers for caching for 10 days with JavaScript content type.
 *
 * @since 2.1.0
 */
function cache_javascript_headers() {
	$expiresOffset = 10 * DAY_IN_SECONDS;

	header( "Content-Type: text/javascript; charset=" . get_bloginfo( 'charset' ) );
	header( "Vary: Accept-Encoding" ); // Handle proxies
	header( "Expires: " . gmdate( "D, d M Y H:i:s", time() + $expiresOffset ) . " GMT" );
}

/**
 * Retrieve the number of database queries during the WordPress execution.
 *
 * @since 2.0.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * @return int Number of database queries.
 */
function get_num_queries() {
	global $wpdb;
	return $wpdb->num_queries;
}

/**
 * Whether input is yes or no.
 *
 * Must be 'y' to be true.
 *
 * @since 1.0.0
 *
 * @param string $yn Character string containing either 'y' (yes) or 'n' (no).
 * @return bool True if yes, false on anything else.
 */
function bool_from_yn( $yn ) {
	return ( strtolower( $yn ) == 'y' );
}

/**
 * Load the feed template from the use of an action hook.
 *
 * If the feed action does not have a hook, then the function will die with a
 * message telling the visitor that the feed is not valid.
 *
 * It is better to only have one hook for each feed.
 *
 * @since 2.1.0
 *
 * @global WP_Query $wp_query Used to tell if the use a comment feed.
 */
function do_feed() {
	global $wp_query;

	$feed = get_query_var( 'feed' );

	// Remove the pad, if present.
	$feed = preg_replace( '/^_+/', '', $feed );

	if ( $feed == '' || $feed == 'feed' )
		$feed = get_default_feed();

	if ( ! has_action( "do_feed_{$feed}" ) ) {
		wp_die( __( 'ERROR: This is not a valid feed template.' ), '', array( 'response' => 404 ) );
	}

	/**
	 * Fires once the given feed is loaded.
	 *
	 * The dynamic portion of the hook name, `$feed`, refers to the feed template name.
	 * Possible values include: 'rdf', 'rss', 'rss2', and 'atom'.
	 *
	 * @since 2.1.0
	 * @since 4.4.0 The `$feed` parameter was added.
	 *
	 * @param bool   $is_comment_feed Whether the feed is a comment feed.
	 * @param string $feed            The feed name.
	 */
	do_action( "do_feed_{$feed}", $wp_query->is_comment_feed, $feed );
}

/**
 * Load the RDF RSS 0.91 Feed template.
 *
 * @since 2.1.0
 *
 * @see load_template()
 */
function do_feed_rdf() {
	load_template( ABSPATH . WPINC . '/feed-rdf.php' );
}

/**
 * Load the RSS 1.0 Feed Template.
 *
 * @since 2.1.0
 *
 * @see load_template()
 */
function do_feed_rss() {
	load_template( ABSPATH . WPINC . '/feed-rss.php' );
}

/**
 * Load either the RSS2 comment feed or the RSS2 posts feed.
 *
 * @since 2.1.0
 *
 * @see load_template()
 *
 * @param bool $for_comments True for the comment feed, false for normal feed.
 */
function do_feed_rss2( $for_comments ) {
	if ( $for_comments )
		load_template( ABSPATH . WPINC . '/feed-rss2-comments.php' );
	else
		load_template( ABSPATH . WPINC . '/feed-rss2.php' );
}

/**
 * Load either Atom comment feed or Atom posts feed.
 *
 * @since 2.1.0
 *
 * @see load_template()
 *
 * @param bool $for_comments True for the comment feed, false for normal feed.
 */
function do_feed_atom( $for_comments ) {
	if ($for_comments)
		load_template( ABSPATH . WPINC . '/feed-atom-comments.php');
	else
		load_template( ABSPATH . WPINC . '/feed-atom.php' );
}

/**
 * Display the robots.txt file content.
 *
 * The echo content should be with usage of the permalinks or for creating the
 * robots.txt file.
 *
 * @since 2.1.0
 */
function do_robots() {
	header( 'Content-Type: text/plain; charset=utf-8' );

	/**
	 * Fires when displaying the robots.txt file.
	 *
	 * @since 2.1.0
	 */
	do_action( 'do_robotstxt' );

	$output = "User-agent: *\n";
	$public = get_option( 'blog_public' );
	if ( '0' == $public ) {
		$output .= "Disallow: /\n";
	} else {
		$site_url = parse_url( site_url() );
		$path = ( !empty( $site_url['path'] ) ) ? $site_url['path'] : '';
		$output .= "Disallow: $path/wp-admin/\n";
		$output .= "Allow: $path/wp-admin/admin-ajax.php\n";
	}

	/**
	 * Filters the robots.txt output.
	 *
	 * @since 3.0.0
	 *
	 * @param string $output Robots.txt output.
	 * @param bool   $public Whether the site is considered "public".
	 */
	echo apply_filters( 'robots_txt', $output, $public );
}

/**
 * Test whether WordPress is already installed.
 *
 * The cache will be checked first. If you have a cache plugin, which saves
 * the cache values, then this will work. If you use the default WordPress
 * cache, and the database goes away, then you might have problems.
 *
 * Checks for the 'siteurl' option for whether WordPress is installed.
 *
 * @since 2.1.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 *
 * @return bool Whether the site is already installed.
 */
function is_blog_installed() {
	global $wpdb;

	/*
	 * Check cache first. If options table goes away and we have true
	 * cached, oh well.
	 */
	if ( wp_cache_get( 'is_blog_installed' ) )
		return true;

	$suppress = $wpdb->suppress_errors();
	if ( ! wp_installing() ) {
		$alloptions = wp_load_alloptions();
	}
	// If siteurl is not set to autoload, check it specifically
	if ( !isset( $alloptions['siteurl'] ) )
		$installed = $wpdb->get_var( "SELECT option_value FROM $wpdb->options WHERE option_name = 'siteurl'" );
	else
		$installed = $alloptions['siteurl'];
	$wpdb->suppress_errors( $suppress );

	$installed = !empty( $installed );
	wp_cache_set( 'is_blog_installed', $installed );

	if ( $installed )
		return true;

	// If visiting repair.php, return true and let it take over.
	if ( defined( 'WP_REPAIRING' ) )
		return true;

	$suppress = $wpdb->suppress_errors();

	/*
	 * Loop over the WP tables. If none exist, then scratch install is allowed.
	 * If one or more exist, suggest table repair since we got here because the
	 * options table could not be accessed.
	 */
	$wp_tables = $wpdb->tables();
	foreach ( $wp_tables as $table ) {
		// The existence of custom user tables shouldn't suggest an insane state or prevent a clean install.
		if ( defined( 'CUSTOM_USER_TABLE' ) && CUSTOM_USER_TABLE == $table )
			continue;
		if ( defined( 'CUSTOM_USER_META_TABLE' ) && CUSTOM_USER_META_TABLE == $table )
			continue;

		if ( ! $wpdb->get_results( "DESCRIBE $table;" ) )
			continue;

		// One or more tables exist. We are insane.

		wp_load_translations_early();

		// Die with a DB error.
		$wpdb->error = sprintf(
			/* translators: %s: database repair URL */
			__( 'One or more database tables are unavailable. The database may need to be <a href="%s">repaired</a>.' ),
			'maint/repair.php?referrer=is_blog_installed'
		);

		dead_db();
	}

	$wpdb->suppress_errors( $suppress );

	wp_cache_set( 'is_blog_installed', false );

	return false;
}

/**
 * Retrieve URL with nonce added to URL query.
 *
 * @since 2.0.4
 *
 * @param string     $actionurl URL to add nonce action.
 * @param int|string $action    Optional. Nonce action name. Default -1.
 * @param string     $name      Optional. Nonce name. Default '_wpnonce'.
 * @return string Escaped URL with nonce action added.
 */
function wp_nonce_url( $actionurl, $action = -1, $name = '_wpnonce' ) {
	$actionurl = str_replace( '&amp;', '&', $actionurl );
	return esc_html( add_query_arg( $name, wp_create_nonce( $action ), $actionurl ) );
}

/**
 * Retrieve or display nonce hidden field for forms.
 *
 * The nonce field is used to validate that the contents of the form came from
 * the location on the current site and not somewhere else. The nonce does not
 * offer absolute protection, but should protect against most cases. It is very
 * important to use nonce field in forms.
 *
 * The $action and $name are optional, but if you want to have better security,
 * it is strongly suggested to set those two parameters. It is easier to just
 * call the function without any parameters, because validation of the nonce
 * doesn't require any parameters, but since crackers know what the default is
 * it won't be difficult for them to find a way around your nonce and cause
 * damage.
 *
 * The input name will be whatever $name value you gave. The input value will be
 * the nonce creation value.
 *
 * @since 2.0.4
 *
 * @param int|string $action  Optional. Action name. Default -1.
 * @param string     $name    Optional. Nonce name. Default '_wpnonce'.
 * @param bool       $referer Optional. Whether to set the referer field for validation. Default true.
 * @param bool       $echo    Optional. Whether to display or return hidden form field. Default true.
 * @return string Nonce field HTML markup.
 */
function wp_nonce_field( $action = -1, $name = "_wpnonce", $referer = true , $echo = true ) {
	$name = esc_attr( $name );
	$nonce_field = '<input type="hidden" id="' . $name . '" name="' . $name . '" value="' . wp_create_nonce( $action ) . '" />';

	if ( $referer )
		$nonce_field .= wp_referer_field( false );

	if ( $echo )
		echo $nonce_field;

	return $nonce_field;
}

/**
 * Retrieve or display referer hidden field for forms.
 *
 * The referer link is the current Request URI from the server super global. The
 * input name is '_wp_http_referer', in case you wanted to check manually.
 *
 * @since 2.0.4
 *
 * @param bool $echo Optional. Whether to echo or return the referer field. Default true.
 * @return string Referer field HTML markup.
 */
function wp_referer_field( $echo = true ) {
	$referer_field = '<input type="hidden" name="_wp_http_referer" value="'. esc_attr( wp_unslash( $_SERVER['REQUEST_URI'] ) ) . '" />';

	if ( $echo )
		echo $referer_field;
	return $referer_field;
}

/**
 * Retrieve or display original referer hidden field for forms.
 *
 * The input name is '_wp_original_http_referer' and will be either the same
 * value of wp_referer_field(), if that was posted already or it will be the
 * current page, if it doesn't exist.
 *
 * @since 2.0.4
 *
 * @param bool   $echo         Optional. Whether to echo the original http referer. Default true.
 * @param string $jump_back_to Optional. Can be 'previous' or page you want to jump back to.
 *                             Default 'current'.
 * @return string Original referer field.
 */
function wp_original_referer_field( $echo = true, $jump_back_to = 'current' ) {
	if ( ! $ref = wp_get_original_referer() ) {
		$ref = 'previous' == $jump_back_to ? wp_get_referer() : wp_unslash( $_SERVER['REQUEST_URI'] );
	}
	$orig_referer_field = '<input type="hidden" name="_wp_original_http_referer" value="' . esc_attr( $ref ) . '" />';
	if ( $echo )
		echo $orig_referer_field;
	return $orig_referer_field;
}

/**
 * Retrieve referer from '_wp_http_referer' or HTTP referer.
 *
 * If it's the same as the current request URL, will return false.
 *
 * @since 2.0.4
 *
 * @return false|string False on failure. Referer URL on success.
 */
function wp_get_referer() {
	if ( ! function_exists( 'wp_validate_redirect' ) ) {
		return false;
	}

	$ref = wp_get_raw_referer();

	if ( $ref && $ref !== wp_unslash( $_SERVER['REQUEST_URI'] ) && $ref !== home_url() . wp_unslash( $_SERVER['REQUEST_URI'] ) ) {
		return wp_validate_redirect( $ref, false );
	}

	return false;
}

/**
 * Retrieves unvalidated referer from '_wp_http_referer' or HTTP referer.
 *
 * Do not use for redirects, use wp_get_referer() instead.
 *
 * @since 4.5.0
 *
 * @return string|false Referer URL on success, false on failure.
 */
function wp_get_raw_referer() {
	if ( ! empty( $_REQUEST['_wp_http_referer'] ) ) {
		return wp_unslash( $_REQUEST['_wp_http_referer'] );
	} else if ( ! empty( $_SERVER['HTTP_REFERER'] ) ) {
		return wp_unslash( $_SERVER['HTTP_REFERER'] );
	}

	return false;
}

/**
 * Retrieve original referer that was posted, if it exists.
 *
 * @since 2.0.4
 *
 * @return string|false False if no original referer or original referer if set.
 */
function wp_get_original_referer() {
	if ( ! empty( $_REQUEST['_wp_original_http_referer'] ) && function_exists( 'wp_validate_redirect' ) )
		return wp_validate_redirect( wp_unslash( $_REQUEST['_wp_original_http_referer'] ), false );
	return false;
}

/**
 * Recursive directory creation based on full path.
 *
 * Will attempt to set permissions on folders.
 *
 * @since 2.0.1
 *
 * @param string $target Full path to attempt to create.
 * @return bool Whether the path was created. True if path already exists.
 */
function wp_mkdir_p( $target ) {
	$wrapper = null;

	// Strip the protocol.
	if ( wp_is_stream( $target ) ) {
		list( $wrapper, $target ) = explode( '://', $target, 2 );
	}

	// From php.net/mkdir user contributed notes.
	$target = str_replace( '//', '/', $target );

	// Put the wrapper back on the target.
	if ( $wrapper !== null ) {
		$target = $wrapper . '://' . $target;
	}

	/*
	 * Safe mode fails with a trailing slash under certain PHP versions.
	 * Use rtrim() instead of untrailingslashit to avoid formatting.php dependency.
	 */
	$target = rtrim($target, '/');
	if ( empty($target) )
		$target = '/';

	if ( file_exists( $target ) )
		return @is_dir( $target );

	// Do not allow path traversals.
	if ( false !== strpos( $target, '../' ) || false !== strpos( $target, '..' . DIRECTORY_SEPARATOR ) ) {
		return false;
	}

	// We need to find the permissions of the parent folder that exists and inherit that.
	$target_parent = dirname( $target );
	while ( '.' != $target_parent && ! is_dir( $target_parent ) ) {
		$target_parent = dirname( $target_parent );
	}

	// Get the permission bits.
	if ( $stat = @stat( $target_parent ) ) {
		$dir_perms = $stat['mode'] & 0007777;
	} else {
		$dir_perms = 0777;
	}

	if ( @mkdir( $target, $dir_perms, true ) ) {

		/*
		 * If a umask is set that modifies $dir_perms, we'll have to re-set
		 * the $dir_perms correctly with chmod()
		 */
		if ( $dir_perms != ( $dir_perms & ~umask() ) ) {
			$folder_parts = explode( '/', substr( $target, strlen( $target_parent ) + 1 ) );
			for ( $i = 1, $c = count( $folder_parts ); $i <= $c; $i++ ) {
				@chmod( $target_parent . '/' . implode( '/', array_slice( $folder_parts, 0, $i ) ), $dir_perms );
			}
		}

		return true;
	}

	return false;
}

/**
 * Test if a give filesystem path is absolute.
 *
 * For example, '/foo/bar', or 'c:\windows'.
 *
 * @since 2.5.0
 *
 * @param string $path File path.
 * @return bool True if path is absolute, false is not absolute.
 */
function path_is_absolute( $path ) {
	/*
	 * This is definitive if true but fails if $path does not exist or contains
	 * a symbolic link.
	 */
	if ( realpath($path) == $path )
		return true;

	if ( strlen($path) == 0 || $path[0] == '.' )
		return false;

	// Windows allows absolute paths like this.
	if ( preg_match('#^[a-zA-Z]:\\\\#', $path) )
		return true;

	// A path starting with / or \ is absolute; anything else is relative.
	return ( $path[0] == '/' || $path[0] == '\\' );
}

/**
 * Join two filesystem paths together.
 *
 * For example, 'give me $path relative to $base'. If the $path is absolute,
 * then it the full path is returned.
 *
 * @since 2.5.0
 *
 * @param string $base Base path.
 * @param string $path Path relative to $base.
 * @return string The path with the base or absolute path.
 */
function path_join( $base, $path ) {
	if ( path_is_absolute($path) )
		return $path;

	return rtrim($base, '/') . '/' . ltrim($path, '/');
}

/**
 * Normalize a filesystem path.
 *
 * On windows systems, replaces backslashes with forward slashes
 * and forces upper-case drive letters.
 * Allows for two leading slashes for Windows network shares, but
 * ensures that all other duplicate slashes are reduced to a single.
 *
 * @since 3.9.0
 * @since 4.4.0 Ensures upper-case drive letters on Windows systems.
 * @since 4.5.0 Allows for Windows network shares.
 * @since 4.9.7 Allows for PHP file wrappers.
 *
 * @param string $path Path to normalize.
 * @return string Normalized path.
 */
function wp_normalize_path( $path ) {
	$wrapper = '';
	if ( wp_is_stream( $path ) ) {
		list( $wrapper, $path ) = explode( '://', $path, 2 );
		$wrapper .= '://';
	}

	// Standardise all paths to use /
	$path = str_replace( '\\', '/', $path );

	// Replace multiple slashes down to a singular, allowing for network shares having two slashes.
	$path = preg_replace( '|(?<=.)/+|', '/', $path );

	// Windows paths should uppercase the drive letter
	if ( ':' === substr( $path, 1, 1 ) ) {
		$path = ucfirst( $path );
	}

	return $wrapper . $path;
}

/**
 * Determine a writable directory for temporary files.
 *
 * Function's preference is the return value of sys_get_temp_dir(),
 * followed by your PHP temporary upload directory, followed by WP_CONTENT_DIR,
 * before finally defaulting to /tmp/
 *
 * In the event that this function does not find a writable location,
 * It may be overridden by the WP_TEMP_DIR constant in your wp-config.php file.
 *
 * @since 2.5.0
 *
 * @staticvar string $temp
 *
 * @return string Writable temporary directory.
 */
function get_temp_dir() {
	static $temp = '';
	if ( defined('WP_TEMP_DIR') )
		return trailingslashit(WP_TEMP_DIR);

	if ( $temp )
		return trailingslashit( $temp );

	if ( function_exists('sys_get_temp_dir') ) {
		$temp = sys_get_temp_dir();
		if ( @is_dir( $temp ) && wp_is_writable( $temp ) )
			return trailingslashit( $temp );
	}

	$temp = ini_get('upload_tmp_dir');
	if ( @is_dir( $temp ) && wp_is_writable( $temp ) )
		return trailingslashit( $temp );

	$temp = WP_CONTENT_DIR . '/';
	if ( is_dir( $temp ) && wp_is_writable( $temp ) )
		return $temp;

	return '/tmp/';
}

/**
 * Determine if a directory is writable.
 *
 * This function is used to work around certain ACL issues in PHP primarily
 * affecting Windows Servers.
 *
 * @since 3.6.0
 *
 * @see win_is_writable()
 *
 * @param string $path Path to check for write-ability.
 * @return bool Whether the path is writable.
 */
function wp_is_writable( $path ) {
	if ( 'WIN' === strtoupper( substr( PHP_OS, 0, 3 ) ) )
		return win_is_writable( $path );
	else
		return @is_writable( $path );
}

/**
 * Workaround for Windows bug in is_writable() function
 *
 * PHP has issues with Windows ACL's for determine if a
 * directory is writable or not, this works around them by
 * checking the ability to open files rather than relying
 * upon PHP to interprate the OS ACL.
 *
 * @since 2.8.0
 *
 * @see https://bugs.php.net/bug.php?id=27609
 * @see https://bugs.php.net/bug.php?id=30931
 *
 * @param string $path Windows path to check for write-ability.
 * @return bool Whether the path is writable.
 */
function win_is_writable( $path ) {

	if ( $path[strlen( $path ) - 1] == '/' ) { // if it looks like a directory, check a random file within the directory
		return win_is_writable( $path . uniqid( mt_rand() ) . '.tmp');
	} elseif ( is_dir( $path ) ) { // If it's a directory (and not a file) check a random file within the directory
		return win_is_writable( $path . '/' . uniqid( mt_rand() ) . '.tmp' );
	}
	// check tmp file for read/write capabilities
	$should_delete_tmp_file = !file_exists( $path );
	$f = @fopen( $path, 'a' );
	if ( $f === false )
		return false;
	fclose( $f );
	if ( $should_delete_tmp_file )
		unlink( $path );
	return true;
}

/**
 * Retrieves uploads directory information.
 *
 * Same as wp_upload_dir() but "light weight" as it doesn't attempt to create the uploads directory.
 * Intended for use in themes, when only 'basedir' and 'baseurl' are needed, generally in all cases
 * when not uploading files.
 *
 * @since 4.5.0
 *
 * @see wp_upload_dir()
 *
 * @return array See wp_upload_dir() for description.
 */
function wp_get_upload_dir() {
	return wp_upload_dir( null, false );
}

/**
 * Get an array containing the current upload directory's path and url.
 *
 * Checks the 'upload_path' option, which should be from the web root folder,
 * and if it isn't empty it will be used. If it is empty, then the path will be
 * 'WP_CONTENT_DIR/uploads'. If the 'UPLOADS' constant is defined, then it will
 * override the 'upload_path' option and 'WP_CONTENT_DIR/uploads' path.
 *
 * The upload URL path is set either by the 'upload_url_path' option or by using
 * the 'WP_CONTENT_URL' constant and appending '/uploads' to the path.
 *
 * If the 'uploads_use_yearmonth_folders' is set to true (checkbox if checked in
 * the administration settings panel), then the time will be used. The format
 * will be year first and then month.
 *
 * If the path couldn't be created, then an error will be returned with the key
 * 'error' containing the error message. The error suggests that the parent
 * directory is not writable by the server.
 *
 * On success, the returned array will have many indices:
 * 'path' - base directory and sub directory or full path to upload directory.
 * 'url' - base url and sub directory or absolute URL to upload directory.
 * 'subdir' - sub directory if uploads use year/month folders option is on.
 * 'basedir' - path without subdir.
 * 'baseurl' - URL path without subdir.
 * 'error' - false or error message.
 *
 * @since 2.0.0
 * @uses _wp_upload_dir()
 *
 * @param string $time Optional. Time formatted in 'yyyy/mm'. Default null.
 * @param bool   $create_dir Optional. Whether to check and create the uploads directory.
 *                           Default true for backward compatibility.
 * @param bool   $refresh_cache Optional. Whether to refresh the cache. Default false.
 * @return array See above for description.
 */
function wp_upload_dir( $time = null, $create_dir = true, $refresh_cache = false ) {
	static $cache = array(), $tested_paths = array();

	$key = sprintf( '%d-%s', get_current_blog_id(), (string) $time );

	if ( $refresh_cache || empty( $cache[ $key ] ) ) {
		$cache[ $key ] = _wp_upload_dir( $time );
	}

	/**
	 * Filters the uploads directory data.
	 *
	 * @since 2.0.0
	 *
	 * @param array $uploads Array of upload directory data with keys of 'path',
	 *                       'url', 'subdir, 'basedir', and 'error'.
	 */
	$uploads = apply_filters( 'upload_dir', $cache[ $key ] );

	if ( $create_dir ) {
		$path = $uploads['path'];

		if ( array_key_exists( $path, $tested_paths ) ) {
			$uploads['error'] = $tested_paths[ $path ];
		} else {
			if ( ! wp_mkdir_p( $path ) ) {
				if ( 0 === strpos( $uploads['basedir'], ABSPATH ) ) {
					$error_path = str_replace( ABSPATH, '', $uploads['basedir'] ) . $uploads['subdir'];
				} else {
					$error_path = basename( $uploads['basedir'] ) . $uploads['subdir'];
				}

				$uploads['error'] = sprintf(
					/* translators: %s: directory path */
					__( 'Unable to create directory %s. Is its parent directory writable by the server?' ),
					esc_html( $error_path )
				);
			}

			$tested_paths[ $path ] = $uploads['error'];
		}
	}

	return $uploads;
}

/**
 * A non-filtered, non-cached version of wp_upload_dir() that doesn't check the path.
 *
 * @access private
 *
 * @param string $time Optional. Time formatted in 'yyyy/mm'. Default null.
 * @return array See wp_upload_dir()
 */
function _wp_upload_dir( $time = null ) {
	$siteurl = get_option( 'siteurl' );
	$upload_path = trim( get_option( 'upload_path' ) );

	if ( empty( $upload_path ) || 'wp-content/uploads' == $upload_path ) {
		$dir = WP_CONTENT_DIR . '/uploads';
	} elseif ( 0 !== strpos( $upload_path, ABSPATH ) ) {
		// $dir is absolute, $upload_path is (maybe) relative to ABSPATH
		$dir = path_join( ABSPATH, $upload_path );
	} else {
		$dir = $upload_path;
	}

	if ( !$url = get_option( 'upload_url_path' ) ) {
		if ( empty($upload_path) || ( 'wp-content/uploads' == $upload_path ) || ( $upload_path == $dir ) )
			$url = WP_CONTENT_URL . '/uploads';
		else
			$url = trailingslashit( $siteurl ) . $upload_path;
	}

	/*
	 * Honor the value of UPLOADS. This happens as long as ms-files rewriting is disabled.
	 * We also sometimes obey UPLOADS when rewriting is enabled -- see the next block.
	 */
	if ( defined( 'UPLOADS' ) && ! ( is_multisite() && get_site_option( 'ms_files_rewriting' ) ) ) {
		$dir = ABSPATH . UPLOADS;
		$url = trailingslashit( $siteurl ) . UPLOADS;
	}

	// If multisite (and if not the main site in a post-MU network)
	if ( is_multisite() && ! ( is_main_network() && is_main_site() && defined( 'MULTISITE' ) ) ) {

		if ( ! get_site_option( 'ms_files_rewriting' ) ) {
			/*
			 * If ms-files rewriting is disabled (networks created post-3.5), it is fairly
			 * straightforward: Append sites/%d if we're not on the main site (for post-MU
			 * networks). (The extra directory prevents a four-digit ID from conflicting with
			 * a year-based directory for the main site. But if a MU-era network has disabled
			 * ms-files rewriting manually, they don't need the extra directory, as they never
			 * had wp-content/uploads for the main site.)
			 */

			if ( defined( 'MULTISITE' ) )
				$ms_dir = '/sites/' . get_current_blog_id();
			else
				$ms_dir = '/' . get_current_blog_id();

			$dir .= $ms_dir;
			$url .= $ms_dir;

		} elseif ( defined( 'UPLOADS' ) && ! ms_is_switched() ) {
			/*
			 * Handle the old-form ms-files.php rewriting if the network still has that enabled.
			 * When ms-files rewriting is enabled, then we only listen to UPLOADS when:
			 * 1) We are not on the main site in a post-MU network, as wp-content/uploads is used
			 *    there, and
			 * 2) We are not switched, as ms_upload_constants() hardcodes these constants to reflect
			 *    the original blog ID.
			 *
			 * Rather than UPLOADS, we actually use BLOGUPLOADDIR if it is set, as it is absolute.
			 * (And it will be set, see ms_upload_constants().) Otherwise, UPLOADS can be used, as
			 * as it is relative to ABSPATH. For the final piece: when UPLOADS is used with ms-files
			 * rewriting in multisite, the resulting URL is /files. (#WP22702 for background.)
			 */

			if ( defined( 'BLOGUPLOADDIR' ) )
				$dir = untrailingslashit( BLOGUPLOADDIR );
			else
				$dir = ABSPATH . UPLOADS;
			$url = trailingslashit( $siteurl ) . 'files';
		}
	}

	$basedir = $dir;
	$baseurl = $url;

	$subdir = '';
	if ( get_option( 'uploads_use_yearmonth_folders' ) ) {
		// Generate the yearly and monthly dirs
		if ( !$time )
			$time = current_time( 'mysql' );
		$y = substr( $time, 0, 4 );
		$m = substr( $time, 5, 2 );
		$subdir = "/$y/$m";
	}

	$dir .= $subdir;
	$url .= $subdir;

	return array(
		'path'    => $dir,
		'url'     => $url,
		'subdir'  => $subdir,
		'basedir' => $basedir,
		'baseurl' => $baseurl,
		'error'   => false,
	);
}

/**
 * Get a filename that is sanitized and unique for the given directory.
 *
 * If the filename is not unique, then a number will be added to the filename
 * before the extension, and will continue adding numbers until the filename is
 * unique.
 *
 * The callback is passed three parameters, the first one is the directory, the
 * second is the filename, and the third is the extension.
 *
 * @since 2.5.0
 *
 * @param string   $dir                      Directory.
 * @param string   $filename                 File name.
 * @param callable $unique_filename_callback Callback. Default null.
 * @return string New filename, if given wasn't unique.
 */
function wp_unique_filename( $dir, $filename, $unique_filename_callback = null ) {
	// Sanitize the file name before we begin processing.
	$filename = sanitize_file_name($filename);

	// Separate the filename into a name and extension.
	$ext = pathinfo( $filename, PATHINFO_EXTENSION );
	$name = pathinfo( $filename, PATHINFO_BASENAME );
	if ( $ext ) {
		$ext = '.' . $ext;
	}

	// Edge case: if file is named '.ext', treat as an empty name.
	if ( $name === $ext ) {
		$name = '';
	}

	/*
	 * Increment the file number until we have a unique file to save in $dir.
	 * Use callback if supplied.
	 */
	if ( $unique_filename_callback && is_callable( $unique_filename_callback ) ) {
		$filename = call_user_func( $unique_filename_callback, $dir, $name, $ext );
	} else {
		$number = '';

		// Change '.ext' to lower case.
		if ( $ext && strtolower($ext) != $ext ) {
			$ext2 = strtolower($ext);
			$filename2 = preg_replace( '|' . preg_quote($ext) . '$|', $ext2, $filename );

			// Check for both lower and upper case extension or image sub-sizes may be overwritten.
			while ( file_exists($dir . "/$filename") || file_exists($dir . "/$filename2") ) {
				$new_number = (int) $number + 1;
				$filename = str_replace( array( "-$number$ext", "$number$ext" ), "-$new_number$ext", $filename );
				$filename2 = str_replace( array( "-$number$ext2", "$number$ext2" ), "-$new_number$ext2", $filename2 );
				$number = $new_number;
			}

			/**
			 * Filters the result when generating a unique file name.
			 *
			 * @since 4.5.0
			 *
			 * @param string        $filename                 Unique file name.
			 * @param string        $ext                      File extension, eg. ".png".
			 * @param string        $dir                      Directory path.
			 * @param callable|null $unique_filename_callback Callback function that generates the unique file name.
			 */
			return apply_filters( 'wp_unique_filename', $filename2, $ext, $dir, $unique_filename_callback );
		}

		while ( file_exists( $dir . "/$filename" ) ) {
			$new_number = (int) $number + 1;
			if ( '' == "$number$ext" ) {
				$filename = "$filename-" . $new_number;
			} else {
				$filename = str_replace( array( "-$number$ext", "$number$ext" ), "-" . $new_number . $ext, $filename );
			}
			$number = $new_number;
		}
	}

	/** This filter is documented in wp-includes/functions.php */
	return apply_filters( 'wp_unique_filename', $filename, $ext, $dir, $unique_filename_callback );
}

/**
 * Create a file in the upload folder with given content.
 *
 * If there is an error, then the key 'error' will exist with the error message.
 * If success, then the key 'file' will have the unique file path, the 'url' key
 * will have the link to the new file. and the 'error' key will be set to false.
 *
 * This function will not move an uploaded file to the upload folder. It will
 * create a new file with the content in $bits parameter. If you move the upload
 * file, read the content of the uploaded file, and then you can give the
 * filename and content to this function, which will add it to the upload
 * folder.
 *
 * The permissions will be set on the new file automatically by this function.
 *
 * @since 2.0.0
 *
 * @param string       $name       Filename.
 * @param null|string  $deprecated Never used. Set to null.
 * @param mixed        $bits       File content
 * @param string       $time       Optional. Time formatted in 'yyyy/mm'. Default null.
 * @return array
 */
function wp_upload_bits( $name, $deprecated, $bits, $time = null ) {
	if ( !empty( $deprecated ) )
		_deprecated_argument( __FUNCTION__, '2.0.0' );

	if ( empty( $name ) )
		return array( 'error' => __( 'Empty filename' ) );

	$wp_filetype = wp_check_filetype( $name );
	if ( ! $wp_filetype['ext'] && ! current_user_can( 'unfiltered_upload' ) )
		return array( 'error' => __( 'Invalid file type' ) );

	$upload = wp_upload_dir( $time );

	if ( $upload['error'] !== false )
		return $upload;

	/**
	 * Filters whether to treat the upload bits as an error.
	 *
	 * Passing a non-array to the filter will effectively short-circuit preparing
	 * the upload bits, returning that value instead.
	 *
	 * @since 3.0.0
	 *
	 * @param mixed $upload_bits_error An array of upload bits data, or a non-array error to return.
	 */
	$upload_bits_error = apply_filters( 'wp_upload_bits', array( 'name' => $name, 'bits' => $bits, 'time' => $time ) );
	if ( !is_array( $upload_bits_error ) ) {
		$upload[ 'error' ] = $upload_bits_error;
		return $upload;
	}

	$filename = wp_unique_filename( $upload['path'], $name );

	$new_file = $upload['path'] . "/$filename";
	if ( ! wp_mkdir_p( dirname( $new_file ) ) ) {
		if ( 0 === strpos( $upload['basedir'], ABSPATH ) )
			$error_path = str_replace( ABSPATH, '', $upload['basedir'] ) . $upload['subdir'];
		else
			$error_path = basename( $upload['basedir'] ) . $upload['subdir'];

		$message = sprintf(
			/* translators: %s: directory path */
			__( 'Unable to create directory %s. Is its parent directory writable by the server?' ),
			$error_path
		);
		return array( 'error' => $message );
	}

	$ifp = @ fopen( $new_file, 'wb' );
	if ( ! $ifp )
		return array( 'error' => sprintf( __( 'Could not write file %s' ), $new_file ) );

	@fwrite( $ifp, $bits );
	fclose( $ifp );
	clearstatcache();

	// Set correct file permissions
	$stat = @ stat( dirname( $new_file ) );
	$perms = $stat['mode'] & 0007777;
	$perms = $perms & 0000666;
	@ chmod( $new_file, $perms );
	clearstatcache();

	// Compute the URL
	$url = $upload['url'] . "/$filename";

	/** This filter is documented in wp-admin/includes/file.php */
	return apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $wp_filetype['type'], 'error' => false ), 'sideload' );
}

/**
 * Retrieve the file type based on the extension name.
 *
 * @since 2.5.0
 *
 * @param string $ext The extension to search.
 * @return string|void The file type, example: audio, video, document, spreadsheet, etc.
 */
function wp_ext2type( $ext ) {
	$ext = strtolower( $ext );

	$ext2type = wp_get_ext_types();
	foreach ( $ext2type as $type => $exts )
		if ( in_array( $ext, $exts ) )
			return $type;
}

/**
 * Retrieve the file type from the file name.
 *
 * You can optionally define the mime array, if needed.
 *
 * @since 2.0.4
 *
 * @param string $filename File name or path.
 * @param array  $mimes    Optional. Key is the file extension with value as the mime type.
 * @return array Values with extension first and mime type.
 */
function wp_check_filetype( $filename, $mimes = null ) {
	if ( empty($mimes) )
		$mimes = get_allowed_mime_types();
	$type = false;
	$ext = false;

	foreach ( $mimes as $ext_preg => $mime_match ) {
		$ext_preg = '!\.(' . $ext_preg . ')$!i';
		if ( preg_match( $ext_preg, $filename, $ext_matches ) ) {
			$type = $mime_match;
			$ext = $ext_matches[1];
			break;
		}
	}

	return compact( 'ext', 'type' );
}

/**
 * Attempt to determine the real file type of a file.
 *
 * If unable to, the file name extension will be used to determine type.
 *
 * If it's determined that the extension does not match the file's real type,
 * then the "proper_filename" value will be set with a proper filename and extension.
 *
 * Currently this function only supports renaming images validated via wp_get_image_mime().
 *
 * @since 3.0.0
 *
 * @param string $file     Full path to the file.
 * @param string $filename The name of the file (may differ from $file due to $file being
 *                         in a tmp directory).
 * @param array   $mimes   Optional. Key is the file extension with value as the mime type.
 * @return array Values for the extension, MIME, and either a corrected filename or false
 *               if original $filename is valid.
 */
function wp_check_filetype_and_ext( $file, $filename, $mimes = null ) {
	$proper_filename = false;

	// Do basic extension validation and MIME mapping
	$wp_filetype = wp_check_filetype( $filename, $mimes );
	$ext = $wp_filetype['ext'];
	$type = $wp_filetype['type'];

	// We can't do any further validation without a file to work with
	if ( ! file_exists( $file ) ) {
		return compact( 'ext', 'type', 'proper_filename' );
	}

	$real_mime = false;

	// Validate image types.
	if ( $type && 0 === strpos( $type, 'image/' ) ) {

		// Attempt to figure out what type of image it actually is
		$real_mime = wp_get_image_mime( $file );

		if ( $real_mime && $real_mime != $type ) {
			/**
			 * Filters the list mapping image mime types to their respective extensions.
			 *
			 * @since 3.0.0
			 *
			 * @param  array $mime_to_ext Array of image mime types and their matching extensions.
			 */
			$mime_to_ext = apply_filters( 'getimagesize_mimes_to_exts', array(
				'image/jpeg' => 'jpg',
				'image/png'  => 'png',
				'image/gif'  => 'gif',
				'image/bmp'  => 'bmp',
				'image/tiff' => 'tif',
			) );

			// Replace whatever is after the last period in the filename with the correct extension
			if ( ! empty( $mime_to_ext[ $real_mime ] ) ) {
				$filename_parts = explode( '.', $filename );
				array_pop( $filename_parts );
				$filename_parts[] = $mime_to_ext[ $real_mime ];
				$new_filename = implode( '.', $filename_parts );

				if ( $new_filename != $filename ) {
					$proper_filename = $new_filename; // Mark that it changed
				}
				// Redefine the extension / MIME
				$wp_filetype = wp_check_filetype( $new_filename, $mimes );
				$ext = $wp_filetype['ext'];
				$type = $wp_filetype['type'];
			} else {
				// Reset $real_mime and try validating again.
				$real_mime = false;
			}
		}
	}

	// Validate files that didn't get validated during previous checks.
	if ( $type && ! $real_mime && extension_loaded( 'fileinfo' ) ) {
		$finfo = finfo_open( FILEINFO_MIME_TYPE );
		$real_mime = finfo_file( $finfo, $file );
		finfo_close( $finfo );

		// fileinfo often misidentifies obscure files as one of these types
		$nonspecific_types = array(
			'application/octet-stream',
			'application/encrypted',
			'application/CDFV2-encrypted',
			'application/zip',
		);

		/*
		 * If $real_mime doesn't match the content type we're expecting from the file's extension,
		 * we need to do some additional vetting. Media types and those listed in $nonspecific_types are
		 * allowed some leeway, but anything else must exactly match the real content type.
		 */
		if ( in_array( $real_mime, $nonspecific_types, true ) ) {
			// File is a non-specific binary type. That's ok if it's a type that generally tends to be binary.
			if ( !in_array( substr( $type, 0, strcspn( $type, '/' ) ), array( 'application', 'video', 'audio' ) ) ) {
				$type = $ext = false;
			}
		} elseif ( 0 === strpos( $real_mime, 'video/' ) || 0 === strpos( $real_mime, 'audio/' ) ) {
			/*
			 * For these types, only the major type must match the real value.
			 * This means that common mismatches are forgiven: application/vnd.apple.numbers is often misidentified as application/zip,
			 * and some media files are commonly named with the wrong extension (.mov instead of .mp4)
			 */

			if ( substr( $real_mime, 0, strcspn( $real_mime, '/' ) ) !== substr( $type, 0, strcspn( $type, '/' ) ) ) {
				$type = $ext = false;
			}
		} else {
			if ( $type !== $real_mime ) {
				/*
				 * Everything else including image/* and application/*: 
				 * If the real content type doesn't match the file extension, assume it's dangerous.
				 */
				$type = $ext = false;
			}

		}
	}

	// The mime type must be allowed 
	if ( $type ) {
		$allowed = get_allowed_mime_types();

		if ( ! in_array( $type, $allowed ) ) {
			$type = $ext = false;
		}
	}

	/**
	 * Filters the "real" file type of the given file.
	 *
	 * @since 3.0.0
	 *
	 * @param array  $wp_check_filetype_and_ext File data array containing 'ext', 'type', and
	 *                                          'proper_filename' keys.
	 * @param string $file                      Full path to the file.
	 * @param string $filename                  The name of the file (may differ from $file due to
	 *                                          $file being in a tmp directory).
	 * @param array  $mimes                     Key is the file extension with value as the mime type.
	 */
	return apply_filters( 'wp_check_filetype_and_ext', compact( 'ext', 'type', 'proper_filename' ), $file, $filename, $mimes );
}

/**
 * Returns the real mime type of an image file.
 *
 * This depends on exif_imagetype() or getimagesize() to determine real mime types.
 *
 * @since 4.7.1
 *
 * @param string $file Full path to the file.
 * @return string|false The actual mime type or false if the type cannot be determined.
 */
function wp_get_image_mime( $file ) {
	/*
	 * Use exif_imagetype() to check the mimetype if available or fall back to
	 * getimagesize() if exif isn't avaialbe. If either function throws an Exception
	 * we assume the file could not be validated.
	 */
	try {
		if ( is_callable( 'exif_imagetype' ) ) {
			$imagetype = exif_imagetype( $file );
			$mime = ( $imagetype ) ? image_type_to_mime_type( $imagetype ) : false;
		} elseif ( function_exists( 'getimagesize' ) ) {
			$imagesize = getimagesize( $file );
			$mime = ( isset( $imagesize['mime'] ) ) ? $imagesize['mime'] : false;
		} else {
			$mime = false;
		}
	} catch ( Exception $e ) {
		$mime = false;
	}

	return $mime;
}

/**
 * Retrieve list of mime types and file extensions.
 *
 * @since 3.5.0
 * @since 4.2.0 Support was added for GIMP (xcf) files.
 *
 * @return array Array of mime types keyed by the file extension regex corresponding to those types.
 */
function wp_get_mime_types() {
	/**
	 * Filters the list of mime types and file extensions.
	 *
	 * This filter should be used to add, not remove, mime types. To remove
	 * mime types, use the {@see 'upload_mimes'} filter.
	 *
	 * @since 3.5.0
	 *
	 * @param array $wp_get_mime_types Mime types keyed by the file extension regex
	 *                                 corresponding to those types.
	 */
	return apply_filters( 'mime_types', array(
	// Image formats.
	'jpg|jpeg|jpe' => 'image/jpeg',
	'gif' => 'image/gif',
	'png' => 'image/png',
	'bmp' => 'image/bmp',
	'tiff|tif' => 'image/tiff',
	'ico' => 'image/x-icon',
	// Video formats.
	'asf|asx' => 'video/x-ms-asf',
	'wmv' => 'video/x-ms-wmv',
	'wmx' => 'video/x-ms-wmx',
	'wm' => 'video/x-ms-wm',
	'avi' => 'video/avi',
	'divx' => 'video/divx',
	'flv' => 'video/x-flv',
	'mov|qt' => 'video/quicktime',
	'mpeg|mpg|mpe' => 'video/mpeg',
	'mp4|m4v' => 'video/mp4',
	'ogv' => 'video/ogg',
	'webm' => 'video/webm',
	'mkv' => 'video/x-matroska',
	'3gp|3gpp' => 'video/3gpp', // Can also be audio
	'3g2|3gp2' => 'video/3gpp2', // Can also be audio
	// Text formats.
	'txt|asc|c|cc|h|srt' => 'text/plain',
	'csv' => 'text/csv',
	'tsv' => 'text/tab-separated-values',
	'ics' => 'text/calendar',
	'rtx' => 'text/richtext',
	'css' => 'text/css',
	'htm|html' => 'text/html',
	'vtt' => 'text/vtt',
	'dfxp' => 'application/ttaf+xml',
	// Audio formats.
	'mp3|m4a|m4b' => 'audio/mpeg',
	'ra|ram' => 'audio/x-realaudio',
	'wav' => 'audio/wav',
	'ogg|oga' => 'audio/ogg',
	'mid|midi' => 'audio/midi',
	'wma' => 'audio/x-ms-wma',
	'wax' => 'audio/x-ms-wax',
	'mka' => 'audio/x-matroska',
	// Misc application formats.
	'rtf' => 'application/rtf',
	'js' => 'application/javascript',
	'pdf' => 'application/pdf',
	'swf' => 'application/x-shockwave-flash',
	'class' => 'application/java',
	'tar' => 'application/x-tar',
	'zip' => 'application/zip',
	'gz|gzip' => 'application/x-gzip',
	'rar' => 'application/rar',
	'7z' => 'application/x-7z-compressed',
	'exe' => 'application/x-msdownload',
	'psd' => 'application/octet-stream',
	'xcf' => 'application/octet-stream',
	// MS Office formats.
	'doc' => 'application/msword',
	'pot|pps|ppt' => 'application/vnd.ms-powerpoint',
	'wri' => 'application/vnd.ms-write',
	'xla|xls|xlt|xlw' => 'application/vnd.ms-excel',
	'mdb' => 'application/vnd.ms-access',
	'mpp' => 'application/vnd.ms-project',
	'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
	'docm' => 'application/vnd.ms-word.document.macroEnabled.12',
	'dotx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.template',
	'dotm' => 'application/vnd.ms-word.template.macroEnabled.12',
	'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
	'xlsm' => 'application/vnd.ms-excel.sheet.macroEnabled.12',
	'xlsb' => 'application/vnd.ms-excel.sheet.binary.macroEnabled.12',
	'xltx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.template',
	'xltm' => 'application/vnd.ms-excel.template.macroEnabled.12',
	'xlam' => 'application/vnd.ms-excel.addin.macroEnabled.12',
	'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
	'pptm' => 'application/vnd.ms-powerpoint.presentation.macroEnabled.12',
	'ppsx' => 'application/vnd.openxmlformats-officedocument.presentationml.slideshow',
	'ppsm' => 'application/vnd.ms-powerpoint.slideshow.macroEnabled.12',
	'potx' => 'application/vnd.openxmlformats-officedocument.presentationml.template',
	'potm' => 'application/vnd.ms-powerpoint.template.macroEnabled.12',
	'ppam' => 'application/vnd.ms-powerpoint.addin.macroEnabled.12',
	'sldx' => 'application/vnd.openxmlformats-officedocument.presentationml.slide',
	'sldm' => 'application/vnd.ms-powerpoint.slide.macroEnabled.12',
	'onetoc|onetoc2|onetmp|onepkg' => 'application/onenote',
	'oxps' => 'application/oxps',
	'xps' => 'application/vnd.ms-xpsdocument',
	// OpenOffice formats.
	'odt' => 'application/vnd.oasis.opendocument.text',
	'odp' => 'application/vnd.oasis.opendocument.presentation',
	'ods' => 'application/vnd.oasis.opendocument.spreadsheet',
	'odg' => 'application/vnd.oasis.opendocument.graphics',
	'odc' => 'application/vnd.oasis.opendocument.chart',
	'odb' => 'application/vnd.oasis.opendocument.database',
	'odf' => 'application/vnd.oasis.opendocument.formula',
	// WordPerfect formats.
	'wp|wpd' => 'application/wordperfect',
	// iWork formats.
	'key' => 'application/vnd.apple.keynote',
	'numbers' => 'application/vnd.apple.numbers',
	'pages' => 'application/vnd.apple.pages',
	) );
}

/**
 * Retrieves the list of common file extensions and their types.
 *
 * @since 4.6.0
 *
 * @return array Array of file extensions types keyed by the type of file.
 */
function wp_get_ext_types() {

	/**
	 * Filters file type based on the extension name.
	 *
	 * @since 2.5.0
	 *
	 * @see wp_ext2type()
	 *
	 * @param array $ext2type Multi-dimensional array with extensions for a default set
	 *                        of file types.
	 */
	return apply_filters( 'ext2type', array(
		'image'       => array( 'jpg', 'jpeg', 'jpe',  'gif',  'png',  'bmp',   'tif',  'tiff', 'ico' ),
		'audio'       => array( 'aac', 'ac3',  'aif',  'aiff', 'm3a',  'm4a',   'm4b',  'mka',  'mp1',  'mp2',  'mp3', 'ogg', 'oga', 'ram', 'wav', 'wma' ),
		'video'       => array( '3g2',  '3gp', '3gpp', 'asf', 'avi',  'divx', 'dv',   'flv',  'm4v',   'mkv',  'mov',  'mp4',  'mpeg', 'mpg', 'mpv', 'ogm', 'ogv', 'qt',  'rm', 'vob', 'wmv' ),
		'document'    => array( 'doc', 'docx', 'docm', 'dotm', 'odt',  'pages', 'pdf',  'xps',  'oxps', 'rtf',  'wp', 'wpd', 'psd', 'xcf' ),
		'spreadsheet' => array( 'numbers',     'ods',  'xls',  'xlsx', 'xlsm',  'xlsb' ),
		'interactive' => array( 'swf', 'key',  'ppt',  'pptx', 'pptm', 'pps',   'ppsx', 'ppsm', 'sldx', 'sldm', 'odp' ),
		'text'        => array( 'asc', 'csv',  'tsv',  'txt' ),
		'archive'     => array( 'bz2', 'cab',  'dmg',  'gz',   'rar',  'sea',   'sit',  'sqx',  'tar',  'tgz',  'zip', '7z' ),
		'code'        => array( 'css', 'htm',  'html', 'php',  'js' ),
	) );
}

/**
 * Retrieve list of allowed mime types and file extensions.
 *
 * @since 2.8.6
 *
 * @param int|WP_User $user Optional. User to check. Defaults to current user.
 * @return array Array of mime types keyed by the file extension regex corresponding
 *               to those types.
 */
function get_allowed_mime_types( $user = null ) {
	$t = wp_get_mime_types();

	unset( $t['swf'], $t['exe'] );
	if ( function_exists( 'current_user_can' ) )
		$unfiltered = $user ? user_can( $user, 'unfiltered_html' ) : current_user_can( 'unfiltered_html' );

	if ( empty( $unfiltered ) ) {
		unset( $t['htm|html'], $t['js'] );
	}

	/**
	 * Filters list of allowed mime types and file extensions.
	 *
	 * @since 2.0.0
	 *
	 * @param array            $t    Mime types keyed by the file extension regex corresponding to
	 *                               those types. 'swf' and 'exe' removed from full list. 'htm|html' also
	 *                               removed depending on '$user' capabilities.
	 * @param int|WP_User|null $user User ID, User object or null if not provided (indicates current user).
	 */
	return apply_filters( 'upload_mimes', $t, $user );
}

/**
 * Display "Are You Sure" message to confirm the action being taken.
 *
 * If the action has the nonce explain message, then it will be displayed
 * along with the "Are you sure?" message.
 *
 * @since 2.0.4
 *
 * @param string $action The nonce action.
 */
function wp_nonce_ays( $action ) {
	if ( 'log-out' == $action ) {
		$html = sprintf(
			/* translators: %s: site name */
			__( 'You are attempting to log out of %s' ),
			get_bloginfo( 'name' )
		);
		$html .= '</p><p>';
		$redirect_to = isset( $_REQUEST['redirect_to'] ) ? $_REQUEST['redirect_to'] : '';
		$html .= sprintf(
			/* translators: %s: logout URL */
			__( 'Do you really want to <a href="%s">log out</a>?' ),
			wp_logout_url( $redirect_to )
		);
	} else {
		$html = __( 'Are you sure you want to do this?' );
		if ( wp_get_referer() ) {
			$html .= '</p><p>';
			$html .= sprintf( '<a href="%s">%s</a>',
				esc_url( remove_query_arg( 'updated', wp_get_referer() ) ),
				__( 'Please try again.' )
			);
		}
	}

	wp_die( $html, __( 'WordPress Failure Notice' ), 403 );
}

/**
 * Kill WordPress execution and display HTML message with error message.
 *
 * This function complements the `die()` PHP function. The difference is that
 * HTML will be displayed to the user. It is recommended to use this function
 * only when the execution should not continue any further. It is not recommended
 * to call this function very often, and try to handle as many errors as possible
 * silently or more gracefully.
 *
 * As a shorthand, the desired HTTP response code may be passed as an integer to
 * the `$title` parameter (the default title would apply) or the `$args` parameter.
 *
 * @since 2.0.4
 * @since 4.1.0 The `$title` and `$args` parameters were changed to optionally accept
 *              an integer to be used as the response code.
 *
 * @param string|WP_Error  $message Optional. Error message. If this is a WP_Error object,
 *                                  and not an Ajax or XML-RPC request, the error's messages are used.
 *                                  Default empty.
 * @param string|int       $title   Optional. Error title. If `$message` is a `WP_Error` object,
 *                                  error data with the key 'title' may be used to specify the title.
 *                                  If `$title` is an integer, then it is treated as the response
 *                                  code. Default empty.
 * @param string|array|int $args {
 *     Optional. Arguments to control behavior. If `$args` is an integer, then it is treated
 *     as the response code. Default empty array.
 *
 *     @type int    $response       The HTTP response code. Default 200 for Ajax requests, 500 otherwise.
 *     @type bool   $back_link      Whether to include a link to go back. Default false.
 *     @type string $text_direction The text direction. This is only useful internally, when WordPress
 *                                  is still loading and the site's locale is not set up yet. Accepts 'rtl'.
 *                                  Default is the value of is_rtl().
 * }
 */
function wp_die( $message = '', $title = '', $args = array() ) {

	if ( is_int( $args ) ) {
		$args = array( 'response' => $args );
	} elseif ( is_int( $title ) ) {
		$args  = array( 'response' => $title );
		$title = '';
	}

	if ( wp_doing_ajax() ) {
		/**
		 * Filters the callback for killing WordPress execution for Ajax requests.
		 *
		 * @since 3.4.0
		 *
		 * @param callable $function Callback function name.
		 */
		$function = apply_filters( 'wp_die_ajax_handler', '_ajax_wp_die_handler' );
	} elseif ( defined( 'XMLRPC_REQUEST' ) && XMLRPC_REQUEST ) {
		/**
		 * Filters the callback for killing WordPress execution for XML-RPC requests.
		 *
		 * @since 3.4.0
		 *
		 * @param callable $function Callback function name.
		 */
		$function = apply_filters( 'wp_die_xmlrpc_handler', '_xmlrpc_wp_die_handler' );
	} else {
		/**
		 * Filters the callback for killing WordPress execution for all non-Ajax, non-XML-RPC requests.
		 *
		 * @since 3.0.0
		 *
		 * @param callable $function Callback function name.
		 */
		$function = apply_filters( 'wp_die_handler', '_default_wp_die_handler' );
	}

	call_user_func( $function, $message, $title, $args );
}

/**
 * Kills WordPress execution and display HTML message with error message.
 *
 * This is the default handler for wp_die if you want a custom one for your
 * site then you can overload using the {@see 'wp_die_handler'} filter in wp_die().
 *
 * @since 3.0.0
 * @access private
 *
 * @param string|WP_Error $message Error message or WP_Error object.
 * @param string          $title   Optional. Error title. Default empty.
 * @param string|array    $args    Optional. Arguments to control behavior. Default empty array.
 */
function _default_wp_die_handler( $message, $title = '', $args = array() ) {
	$defaults = array( 'response' => 500 );
	$r = wp_parse_args($args, $defaults);

	$have_gettext = function_exists('__');

	if ( function_exists( 'is_wp_error' ) && is_wp_error( $message ) ) {
		if ( empty( $title ) ) {
			$error_data = $message->get_error_data();
			if ( is_array( $error_data ) && isset( $error_data['title'] ) )
				$title = $error_data['title'];
		}
		$errors = $message->get_error_messages();
		switch ( count( $errors ) ) {
		case 0 :
			$message = '';
			break;
		case 1 :
			$message = "<p>{$errors[0]}</p>";
			break;
		default :
			$message = "<ul>\n\t\t<li>" . join( "</li>\n\t\t<li>", $errors ) . "</li>\n\t</ul>";
			break;
		}
	} elseif ( is_string( $message ) ) {
		$message = "<p>$message</p>";
	}

	if ( isset( $r['back_link'] ) && $r['back_link'] ) {
		$back_text = $have_gettext? __('&laquo; Back') : '&laquo; Back';
		$message .= "\n<p><a href='javascript:history.back()'>$back_text</a></p>";
	}

	if ( ! did_action( 'admin_head' ) ) :
		if ( !headers_sent() ) {
			status_header( $r['response'] );
			nocache_headers();
			header( 'Content-Type: text/html; charset=utf-8' );
		}

		if ( empty($title) )
			$title = $have_gettext ? __('WordPress &rsaquo; Error') : 'WordPress &rsaquo; Error';

		$text_direction = 'ltr';
		if ( isset($r['text_direction']) && 'rtl' == $r['text_direction'] )
			$text_direction = 'rtl';
		elseif ( function_exists( 'is_rtl' ) && is_rtl() )
			$text_direction = 'rtl';
?>
<!DOCTYPE html>
<!-- Ticket #11289, IE bug fix: always pad the error page with enough characters such that it is greater than 512 bytes, even after gzip compression abcdefghijklmnopqrstuvwxyz1234567890aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz11223344556677889900abacbcbdcdcededfefegfgfhghgihihjijikjkjlklkmlmlnmnmononpopoqpqprqrqsrsrtstsubcbcdcdedefefgfabcadefbghicjkldmnoepqrfstugvwxhyz1i234j567k890laabmbccnddeoeffpgghqhiirjjksklltmmnunoovppqwqrrxsstytuuzvvw0wxx1yyz2z113223434455666777889890091abc2def3ghi4jkl5mno6pqr7stu8vwx9yz11aab2bcc3dd4ee5ff6gg7hh8ii9j0jk1kl2lmm3nnoo4p5pq6qrr7ss8tt9uuvv0wwx1x2yyzz13aba4cbcb5dcdc6dedfef8egf9gfh0ghg1ihi2hji3jik4jkj5lkl6kml7mln8mnm9ono
-->
<html xmlns="http://www.w3.org/1999/xhtml" <?php if ( function_exists( 'language_attributes' ) && function_exists( 'is_rtl' ) ) language_attributes(); else echo "dir='$text_direction'"; ?>>
<head>
	<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
	<meta name="viewport" content="width=device-width">
	<?php
	if ( function_exists( 'wp_no_robots' ) ) {
		wp_no_robots();
	}
	?>
	<title><?php echo $title ?></title>
	<style type="text/css">
		html {
			background: #f1f1f1;
		}
		body {
			background: #fff;
			color: #444;
			font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Oxygen-Sans, Ubuntu, Cantarell, "Helvetica Neue", sans-serif;
			margin: 2em auto;
			padding: 1em 2em;
			max-width: 700px;
			-webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.13);
			box-shadow: 0 1px 3px rgba(0,0,0,0.13);
		}
		h1 {
			border-bottom: 1px solid #dadada;
			clear: both;
			color: #666;
			font-size: 24px;
			margin: 30px 0 0 0;
			padding: 0;
			padding-bottom: 7px;
		}
		#error-page {
			margin-top: 50px;
		}
		#error-page p {
			font-size: 14px;
			line-height: 1.5;
			margin: 25px 0 20px;
		}
		#error-page code {
			font-family: Consolas, Monaco, monospace;
		}
		ul li {
			margin-bottom: 10px;
			font-size: 14px ;
		}
		a {
			color: #0073aa;
		}
		a:hover,
		a:active {
			color: #00a0d2;
		}
		a:focus {
			color: #124964;
		    -webkit-box-shadow:
		    	0 0 0 1px #5b9dd9,
				0 0 2px 1px rgba(30, 140, 190, .8);
		    box-shadow:
		    	0 0 0 1px #5b9dd9,
				0 0 2px 1px rgba(30, 140, 190, .8);
			outline: none;
		}
		.button {
			background: #f7f7f7;
			border: 1px solid #ccc;
			color: #555;
			display: inline-block;
			text-decoration: none;
			font-size: 13px;
			line-height: 26px;
			height: 28px;
			margin: 0;
			padding: 0 10px 1px;
			cursor: pointer;
			-webkit-border-radius: 3px;
			-webkit-appearance: none;
			border-radius: 3px;
			white-space: nowrap;
			-webkit-box-sizing: border-box;
			-moz-box-sizing:    border-box;
			box-sizing:         border-box;

			-webkit-box-shadow: 0 1px 0 #ccc;
			box-shadow: 0 1px 0 #ccc;
		 	vertical-align: top;
		}

		.button.button-large {
			height: 30px;
			line-height: 28px;
			padding: 0 12px 2px;
		}

		.button:hover,
		.button:focus {
			background: #fafafa;
			border-color: #999;
			color: #23282d;
		}

		.button:focus  {
			border-color: #5b9dd9;
			-webkit-box-shadow: 0 0 3px rgba( 0, 115, 170, .8 );
			box-shadow: 0 0 3px rgba( 0, 115, 170, .8 );
			outline: none;
		}

		.button:active {
			background: #eee;
			border-color: #999;
		 	-webkit-box-shadow: inset 0 2px 5px -3px rgba( 0, 0, 0, 0.5 );
		 	box-shadow: inset 0 2px 5px -3px rgba( 0, 0, 0, 0.5 );
		 	-webkit-transform: translateY(1px);
		 	-ms-transform: translateY(1px);
		 	transform: translateY(1px);
		}

		<?php
		if ( 'rtl' == $text_direction ) {
			echo 'body { font-family: Tahoma, Arial; }';
		}
		?>
	</style>
</head>
<body id="error-page">
<?php endif; // ! did_action( 'admin_head' ) ?>
	<?php echo $message; ?>
</body>
</html>
<?php
	die();
}

/**
 * Kill WordPress execution and display XML message with error message.
 *
 * This is the handler for wp_die when processing XMLRPC requests.
 *
 * @since 3.2.0
 * @access private
 *
 * @global wp_xmlrpc_server $wp_xmlrpc_server
 *
 * @param string       $message Error message.
 * @param string       $title   Optional. Error title. Default empty.
 * @param string|array $args    Optional. Arguments to control behavior. Default empty array.
 */
function _xmlrpc_wp_die_handler( $message, $title = '', $args = array() ) {
	global $wp_xmlrpc_server;
	$defaults = array( 'response' => 500 );

	$r = wp_parse_args($args, $defaults);

	if ( $wp_xmlrpc_server ) {
		$error = new IXR_Error( $r['response'] , $message);
		$wp_xmlrpc_server->output( $error->getXml() );
	}
	die();
}

/**
 * Kill WordPress ajax execution.
 *
 * This is the handler for wp_die when processing Ajax requests.
 *
 * @since 3.4.0
 * @access private
 *
 * @param string       $message Error message.
 * @param string       $title   Optional. Error title (unused). Default empty.
 * @param string|array $args    Optional. Arguments to control behavior. Default empty array.
 */
function _ajax_wp_die_handler( $message, $title = '', $args = array() ) {
	$defaults = array(
		'response' => 200,
	);
	$r = wp_parse_args( $args, $defaults );

	if ( ! headers_sent() && null !== $r['response'] ) {
		status_header( $r['response'] );
	}

	if ( is_scalar( $message ) )
		die( (string) $message );
	die( '0' );
}

/**
 * Kill WordPress execution.
 *
 * This is the handler for wp_die when processing APP requests.
 *
 * @since 3.4.0
 * @access private
 *
 * @param string $message Optional. Response to print. Default empty.
 */
function _scalar_wp_die_handler( $message = '' ) {
	if ( is_scalar( $message ) )
		die( (string) $message );
	die();
}

/**
 * Encode a variable into JSON, with some sanity checks.
 *
 * @since 4.1.0
 *
 * @param mixed $data    Variable (usually an array or object) to encode as JSON.
 * @param int   $options Optional. Options to be passed to json_encode(). Default 0.
 * @param int   $depth   Optional. Maximum depth to walk through $data. Must be
 *                       greater than 0. Default 512.
 * @return string|false The JSON encoded string, or false if it cannot be encoded.
 */
function wp_json_encode( $data, $options = 0, $depth = 512 ) {
	/*
	 * json_encode() has had extra params added over the years.
	 * $options was added in 5.3, and $depth in 5.5.
	 * We need to make sure we call it with the correct arguments.
	 */
	if ( version_compare( PHP_VERSION, '5.5', '>=' ) ) {
		$args = array( $data, $options, $depth );
	} elseif ( version_compare( PHP_VERSION, '5.3', '>=' ) ) {
		$args = array( $data, $options );
	} else {
		$args = array( $data );
	}

	// Prepare the data for JSON serialization.
	$args[0] = _wp_json_prepare_data( $data );

	$json = @call_user_func_array( 'json_encode', $args );

	// If json_encode() was successful, no need to do more sanity checking.
	// ... unless we're in an old version of PHP, and json_encode() returned
	// a string containing 'null'. Then we need to do more sanity checking.
	if ( false !== $json && ( version_compare( PHP_VERSION, '5.5', '>=' ) || false === strpos( $json, 'null' ) ) )  {
		return $json;
	}

	try {
		$args[0] = _wp_json_sanity_check( $data, $depth );
	} catch ( Exception $e ) {
		return false;
	}

	return call_user_func_array( 'json_encode', $args );
}

/**
 * Perform sanity checks on data that shall be encoded to JSON.
 *
 * @ignore
 * @since 4.1.0
 * @access private
 *
 * @see wp_json_encode()
 *
 * @param mixed $data  Variable (usually an array or object) to encode as JSON.
 * @param int   $depth Maximum depth to walk through $data. Must be greater than 0.
 * @return mixed The sanitized data that shall be encoded to JSON.
 */
function _wp_json_sanity_check( $data, $depth ) {
	if ( $depth < 0 ) {
		throw new Exception( 'Reached depth limit' );
	}

	if ( is_array( $data ) ) {
		$output = array();
		foreach ( $data as $id => $el ) {
			// Don't forget to sanitize the ID!
			if ( is_string( $id ) ) {
				$clean_id = _wp_json_convert_string( $id );
			} else {
				$clean_id = $id;
			}

			// Check the element type, so that we're only recursing if we really have to.
			if ( is_array( $el ) || is_object( $el ) ) {
				$output[ $clean_id ] = _wp_json_sanity_check( $el, $depth - 1 );
			} elseif ( is_string( $el ) ) {
				$output[ $clean_id ] = _wp_json_convert_string( $el );
			} else {
				$output[ $clean_id ] = $el;
			}
		}
	} elseif ( is_object( $data ) ) {
		$output = new stdClass;
		foreach ( $data as $id => $el ) {
			if ( is_string( $id ) ) {
				$clean_id = _wp_json_convert_string( $id );
			} else {
				$clean_id = $id;
			}

			if ( is_array( $el ) || is_object( $el ) ) {
				$output->$clean_id = _wp_json_sanity_check( $el, $depth - 1 );
			} elseif ( is_string( $el ) ) {
				$output->$clean_id = _wp_json_convert_string( $el );
			} else {
				$output->$clean_id = $el;
			}
		}
	} elseif ( is_string( $data ) ) {
		return _wp_json_convert_string( $data );
	} else {
		return $data;
	}

	return $output;
}

/**
 * Convert a string to UTF-8, so that it can be safely encoded to JSON.
 *
 * @ignore
 * @since 4.1.0
 * @access private
 *
 * @see _wp_json_sanity_check()
 *
 * @staticvar bool $use_mb
 *
 * @param string $string The string which is to be converted.
 * @return string The checked string.
 */
function _wp_json_convert_string( $string ) {
	static $use_mb = null;
	if ( is_null( $use_mb ) ) {
		$use_mb = function_exists( 'mb_convert_encoding' );
	}

	if ( $use_mb ) {
		$encoding = mb_detect_encoding( $string, mb_detect_order(), true );
		if ( $encoding ) {
			return mb_convert_encoding( $string, 'UTF-8', $encoding );
		} else {
			return mb_convert_encoding( $string, 'UTF-8', 'UTF-8' );
		}
	} else {
		return wp_check_invalid_utf8( $string, true );
	}
}

/**
 * Prepares response data to be serialized to JSON.
 *
 * This supports the JsonSerializable interface for PHP 5.2-5.3 as well.
 *
 * @ignore
 * @since 4.4.0
 * @access private
 *
 * @param mixed $data Native representation.
 * @return bool|int|float|null|string|array Data ready for `json_encode()`.
 */
function _wp_json_prepare_data( $data ) {
	if ( ! defined( 'WP_JSON_SERIALIZE_COMPATIBLE' ) || WP_JSON_SERIALIZE_COMPATIBLE === false ) {
		return $data;
	}

	switch ( gettype( $data ) ) {
		case 'boolean':
		case 'integer':
		case 'double':
		case 'string':
		case 'NULL':
			// These values can be passed through.
			return $data;

		case 'array':
			// Arrays must be mapped in case they also return objects.
			return array_map( '_wp_json_prepare_data', $data );

		case 'object':
			// If this is an incomplete object (__PHP_Incomplete_Class), bail.
			if ( ! is_object( $data ) ) {
				return null;
			}

			if ( $data instanceof JsonSerializable ) {
				$data = $data->jsonSerialize();
			} else {
				$data = get_object_vars( $data );
			}

			// Now, pass the array (or whatever was returned from jsonSerialize through).
			return _wp_json_prepare_data( $data );

		default:
			return null;
	}
}

/**
 * Send a JSON response back to an Ajax request.
 *
 * @since 3.5.0
 * @since 4.7.0 The `$status_code` parameter was added.
 *
 * @param mixed $response    Variable (usually an array or object) to encode as JSON,
 *                           then print and die.
 * @param int   $status_code The HTTP status code to output.
 */
function wp_send_json( $response, $status_code = null ) {
	@header( 'Content-Type: application/json; charset=' . get_option( 'blog_charset' ) );
	if ( null !== $status_code ) {
		status_header( $status_code );
	}
	echo wp_json_encode( $response );

	if ( wp_doing_ajax() ) {
		wp_die( '', '', array(
			'response' => null,
		) );
	} else {
		die;
	}
}

/**
 * Send a JSON response back to an Ajax request, indicating success.
 *
 * @since 3.5.0
 * @since 4.7.0 The `$status_code` parameter was added.
 *
 * @param mixed $data        Data to encode as JSON, then print and die.
 * @param int   $status_code The HTTP status code to output.
 */
function wp_send_json_success( $data = null, $status_code = null ) {
	$response = array( 'success' => true );

	if ( isset( $data ) )
		$response['data'] = $data;

	wp_send_json( $response, $status_code );
}

/**
 * Send a JSON response back to an Ajax request, indicating failure.
 *
 * If the `$data` parameter is a WP_Error object, the errors
 * within the object are processed and output as an array of error
 * codes and corresponding messages. All other types are output
 * without further processing.
 *
 * @since 3.5.0
 * @since 4.1.0 The `$data` parameter is now processed if a WP_Error object is passed in.
 * @since 4.7.0 The `$status_code` parameter was added.
 *
 * @param mixed $data        Data to encode as JSON, then print and die.
 * @param int   $status_code The HTTP status code to output.
 */
function wp_send_json_error( $data = null, $status_code = null ) {
	$response = array( 'success' => false );

	if ( isset( $data ) ) {
		if ( is_wp_error( $data ) ) {
			$result = array();
			foreach ( $data->errors as $code => $messages ) {
				foreach ( $messages as $message ) {
					$result[] = array( 'code' => $code, 'message' => $message );
				}
			}

			$response['data'] = $result;
		} else {
			$response['data'] = $data;
		}
	}

	wp_send_json( $response, $status_code );
}

/**
 * Checks that a JSONP callback is a valid JavaScript callback.
 *
 * Only allows alphanumeric characters and the dot character in callback
 * function names. This helps to mitigate XSS attacks caused by directly
 * outputting user input.
 *
 * @since 4.6.0
 *
 * @param string $callback Supplied JSONP callback function.
 * @return bool True if valid callback, otherwise false.
 */
function wp_check_jsonp_callback( $callback ) {
	if ( ! is_string( $callback ) ) {
		return false;
	}

	preg_replace( '/[^\w\.]/', '', $callback, -1, $illegal_char_count );

	return 0 === $illegal_char_count;
}

/**
 * Retrieve the WordPress home page URL.
 *
 * If the constant named 'WP_HOME' exists, then it will be used and returned
 * by the function. This can be used to counter the redirection on your local
 * development environment.
 *
 * @since 2.2.0
 * @access private
 *
 * @see WP_HOME
 *
 * @param string $url URL for the home location.
 * @return string Homepage location.
 */
function _config_wp_home( $url = '' ) {
	if ( defined( 'WP_HOME' ) )
		return untrailingslashit( WP_HOME );
	return $url;
}

/**
 * Retrieve the WordPress site URL.
 *
 * If the constant named 'WP_SITEURL' is defined, then the value in that
 * constant will always be returned. This can be used for debugging a site
 * on your localhost while not having to change the database to your URL.
 *
 * @since 2.2.0
 * @access private
 *
 * @see WP_SITEURL
 *
 * @param string $url URL to set the WordPress site location.
 * @return string The WordPress Site URL.
 */
function _config_wp_siteurl( $url = '' ) {
	if ( defined( 'WP_SITEURL' ) )
		return untrailingslashit( WP_SITEURL );
	return $url;
}

/**
 * Delete the fresh site option.
 *
 * @since 4.7.0
 * @access private
 */
function _delete_option_fresh_site() {
	update_option( 'fresh_site', 0 );
}

/**
 * Set the localized direction for MCE plugin.
 *
 * Will only set the direction to 'rtl', if the WordPress locale has
 * the text direction set to 'rtl'.
 *
 * Fills in the 'directionality' setting, enables the 'directionality'
 * plugin, and adds the 'ltr' button to 'toolbar1', formerly
 * 'theme_advanced_buttons1' array keys. These keys are then returned
 * in the $mce_init (TinyMCE settings) array.
 *
 * @since 2.1.0
 * @access private
 *
 * @param array $mce_init MCE settings array.
 * @return array Direction set for 'rtl', if needed by locale.
 */
function _mce_set_direction( $mce_init ) {
	if ( is_rtl() ) {
		$mce_init['directionality'] = 'rtl';
		$mce_init['rtl_ui'] = true;

		if ( ! empty( $mce_init['plugins'] ) && strpos( $mce_init['plugins'], 'directionality' ) === false ) {
			$mce_init['plugins'] .= ',directionality';
		}

		if ( ! empty( $mce_init['toolbar1'] ) && ! preg_match( '/\bltr\b/', $mce_init['toolbar1'] ) ) {
			$mce_init['toolbar1'] .= ',ltr';
		}
	}

	return $mce_init;
}


/**
 * Convert smiley code to the icon graphic file equivalent.
 *
 * You can turn off smilies, by going to the write setting screen and unchecking
 * the box, or by setting 'use_smilies' option to false or removing the option.
 *
 * Plugins may override the default smiley list by setting the $wpsmiliestrans
 * to an array, with the key the code the blogger types in and the value the
 * image file.
 *
 * The $wp_smiliessearch global is for the regular expression and is set each
 * time the function is called.
 *
 * The full list of smilies can be found in the function and won't be listed in
 * the description. Probably should create a Codex page for it, so that it is
 * available.
 *
 * @global array $wpsmiliestrans
 * @global array $wp_smiliessearch
 *
 * @since 2.2.0
 */
function smilies_init() {
	global $wpsmiliestrans, $wp_smiliessearch;

	// don't bother setting up smilies if they are disabled
	if ( !get_option( 'use_smilies' ) )
		return;

	if ( !isset( $wpsmiliestrans ) ) {
		$wpsmiliestrans = array(
		':mrgreen:' => 'mrgreen.png',
		':neutral:' => "\xf0\x9f\x98\x90",
		':twisted:' => "\xf0\x9f\x98\x88",
		  ':arrow:' => "\xe2\x9e\xa1",
		  ':shock:' => "\xf0\x9f\x98\xaf",
		  ':smile:' => "\xf0\x9f\x99\x82",
		    ':???:' => "\xf0\x9f\x98\x95",
		   ':cool:' => "\xf0\x9f\x98\x8e",
		   ':evil:' => "\xf0\x9f\x91\xbf",
		   ':grin:' => "\xf0\x9f\x98\x80",
		   ':idea:' => "\xf0\x9f\x92\xa1",
		   ':oops:' => "\xf0\x9f\x98\xb3",
		   ':razz:' => "\xf0\x9f\x98\x9b",
		   ':roll:' => "\xf0\x9f\x99\x84",
		   ':wink:' => "\xf0\x9f\x98\x89",
		    ':cry:' => "\xf0\x9f\x98\xa5",
		    ':eek:' => "\xf0\x9f\x98\xae",
		    ':lol:' => "\xf0\x9f\x98\x86",
		    ':mad:' => "\xf0\x9f\x98\xa1",
		    ':sad:' => "\xf0\x9f\x99\x81",
		      '8-)' => "\xf0\x9f\x98\x8e",
		      '8-O' => "\xf0\x9f\x98\xaf",
		      ':-(' => "\xf0\x9f\x99\x81",
		      ':-)' => "\xf0\x9f\x99\x82",
		      ':-?' => "\xf0\x9f\x98\x95",
		      ':-D' => "\xf0\x9f\x98\x80",
		      ':-P' => "\xf0\x9f\x98\x9b",
		      ':-o' => "\xf0\x9f\x98\xae",
		      ':-x' => "\xf0\x9f\x98\xa1",
		      ':-|' => "\xf0\x9f\x98\x90",
		      ';-)' => "\xf0\x9f\x98\x89",
		// This one transformation breaks regular text with frequency.
		//     '8)' => "\xf0\x9f\x98\x8e",
		       '8O' => "\xf0\x9f\x98\xaf",
		       ':(' => "\xf0\x9f\x99\x81",
		       ':)' => "\xf0\x9f\x99\x82",
		       ':?' => "\xf0\x9f\x98\x95",
		       ':D' => "\xf0\x9f\x98\x80",
		       ':P' => "\xf0\x9f\x98\x9b",
		       ':o' => "\xf0\x9f\x98\xae",
		       ':x' => "\xf0\x9f\x98\xa1",
		       ':|' => "\xf0\x9f\x98\x90",
		       ';)' => "\xf0\x9f\x98\x89",
		      ':!:' => "\xe2\x9d\x97",
		      ':?:' => "\xe2\x9d\x93",
		);
	}

	/**
	 * Filters all the smilies.
	 *
	 * This filter must be added before `smilies_init` is run, as
	 * it is normally only run once to setup the smilies regex.
	 *
	 * @since 4.7.0
	 *
	 * @param array $wpsmiliestrans List of the smilies.
	 */
	$wpsmiliestrans = apply_filters('smilies', $wpsmiliestrans);

	if (count($wpsmiliestrans) == 0) {
		return;
	}

	/*
	 * NOTE: we sort the smilies in reverse key order. This is to make sure
	 * we match the longest possible smilie (:???: vs :?) as the regular
	 * expression used below is first-match
	 */
	krsort($wpsmiliestrans);

	$spaces = wp_spaces_regexp();

	// Begin first "subpattern"
	$wp_smiliessearch = '/(?<=' . $spaces . '|^)';

	$subchar = '';
	foreach ( (array) $wpsmiliestrans as $smiley => $img ) {
		$firstchar = substr($smiley, 0, 1);
		$rest = substr($smiley, 1);

		// new subpattern?
		if ($firstchar != $subchar) {
			if ($subchar != '') {
				$wp_smiliessearch .= ')(?=' . $spaces . '|$)';  // End previous "subpattern"
				$wp_smiliessearch .= '|(?<=' . $spaces . '|^)'; // Begin another "subpattern"
			}
			$subchar = $firstchar;
			$wp_smiliessearch .= preg_quote($firstchar, '/') . '(?:';
		} else {
			$wp_smiliessearch .= '|';
		}
		$wp_smiliessearch .= preg_quote($rest, '/');
	}

	$wp_smiliessearch .= ')(?=' . $spaces . '|$)/m';

}

/**
 * Merge user defined arguments into defaults array.
 *
 * This function is used throughout WordPress to allow for both string or array
 * to be merged into another array.
 *
 * @since 2.2.0
 * @since 2.3.0 `$args` can now also be an object.
 *
 * @param string|array|object $args     Value to merge with $defaults.
 * @param array               $defaults Optional. Array that serves as the defaults. Default empty.
 * @return array Merged user defined values with defaults.
 */
function wp_parse_args( $args, $defaults = '' ) {
	if ( is_object( $args ) )
		$r = get_object_vars( $args );
	elseif ( is_array( $args ) )
		$r =& $args;
	else
		wp_parse_str( $args, $r );

	if ( is_array( $defaults ) )
		return array_merge( $defaults, $r );
	return $r;
}

/**
 * Clean up an array, comma- or space-separated list of IDs.
 *
 * @since 3.0.0
 *
 * @param array|string $list List of ids.
 * @return array Sanitized array of IDs.
 */
function wp_parse_id_list( $list ) {
	if ( !is_array($list) )
		$list = preg_split('/[\s,]+/', $list);

	return array_unique(array_map('absint', $list));
}

/**
 * Clean up an array, comma- or space-separated list of slugs.
 *
 * @since 4.7.0
 *
 * @param  array|string $list List of slugs.
 * @return array Sanitized array of slugs.
 */
function wp_parse_slug_list( $list ) {
	if ( ! is_array( $list ) ) {
		$list = preg_split( '/[\s,]+/', $list );
	}

	foreach ( $list as $key => $value ) {
		$list[ $key ] = sanitize_title( $value );
	}

	return array_unique( $list );
}

/**
 * Extract a slice of an array, given a list of keys.
 *
 * @since 3.1.0
 *
 * @param array $array The original array.
 * @param array $keys  The list of keys.
 * @return array The array slice.
 */
function wp_array_slice_assoc( $array, $keys ) {
	$slice = array();
	foreach ( $keys as $key )
		if ( isset( $array[ $key ] ) )
			$slice[ $key ] = $array[ $key ];

	return $slice;
}

/**
 * Determines if the variable is a numeric-indexed array.
 *
 * @since 4.4.0
 *
 * @param mixed $data Variable to check.
 * @return bool Whether the variable is a list.
 */
function wp_is_numeric_array( $data ) {
	if ( ! is_array( $data ) ) {
		return false;
	}

	$keys = array_keys( $data );
	$string_keys = array_filter( $keys, 'is_string' );
	return count( $string_keys ) === 0;
}

/**
 * Filters a list of objects, based on a set of key => value arguments.
 *
 * @since 3.0.0
 * @since 4.7.0 Uses WP_List_Util class.
 *
 * @param array       $list     An array of objects to filter
 * @param array       $args     Optional. An array of key => value arguments to match
 *                              against each object. Default empty array.
 * @param string      $operator Optional. The logical operation to perform. 'or' means
 *                              only one element from the array needs to match; 'and'
 *                              means all elements must match; 'not' means no elements may
 *                              match. Default 'and'.
 * @param bool|string $field    A field from the object to place instead of the entire object.
 *                              Default false.
 * @return array A list of objects or object fields.
 */
function wp_filter_object_list( $list, $args = array(), $operator = 'and', $field = false ) {
	if ( ! is_array( $list ) ) {
		return array();
	}

	$util = new WP_List_Util( $list );

	$util->filter( $args, $operator );

	if ( $field ) {
		$util->pluck( $field );
	}

	return $util->get_output();
}

/**
 * Filters a list of objects, based on a set of key => value arguments.
 *
 * @since 3.1.0
 * @since 4.7.0 Uses WP_List_Util class.
 *
 * @param array  $list     An array of objects to filter.
 * @param array  $args     Optional. An array of key => value arguments to match
 *                         against each object. Default empty array.
 * @param string $operator Optional. The logical operation to perform. 'AND' means
 *                         all elements from the array must match. 'OR' means only
 *                         one element needs to match. 'NOT' means no elements may
 *                         match. Default 'AND'.
 * @return array Array of found values.
 */
function wp_list_filter( $list, $args = array(), $operator = 'AND' ) {
	if ( ! is_array( $list ) ) {
		return array();
	}

	$util = new WP_List_Util( $list );
	return $util->filter( $args, $operator );
}

/**
 * Pluck a certain field out of each object in a list.
 *
 * This has the same functionality and prototype of
 * array_column() (PHP 5.5) but also supports objects.
 *
 * @since 3.1.0
 * @since 4.0.0 $index_key parameter added.
 * @since 4.7.0 Uses WP_List_Util class.
 *
 * @param array      $list      List of objects or arrays
 * @param int|string $field     Field from the object to place instead of the entire object
 * @param int|string $index_key Optional. Field from the object to use as keys for the new array.
 *                              Default null.
 * @return array Array of found values. If `$index_key` is set, an array of found values with keys
 *               corresponding to `$index_key`. If `$index_key` is null, array keys from the original
 *               `$list` will be preserved in the results.
 */
function wp_list_pluck( $list, $field, $index_key = null ) {
	$util = new WP_List_Util( $list );
	return $util->pluck( $field, $index_key );
}

/**
 * Sorts a list of objects, based on one or more orderby arguments.
 *
 * @since 4.7.0
 *
 * @param array        $list          An array of objects to filter.
 * @param string|array $orderby       Optional. Either the field name to order by or an array
 *                                    of multiple orderby fields as $orderby => $order.
 * @param string       $order         Optional. Either 'ASC' or 'DESC'. Only used if $orderby
 *                                    is a string.
 * @param bool         $preserve_keys Optional. Whether to preserve keys. Default false.
 * @return array The sorted array.
 */
function wp_list_sort( $list, $orderby = array(), $order = 'ASC', $preserve_keys = false ) {
	if ( ! is_array( $list ) ) {
		return array();
	}

	$util = new WP_List_Util( $list );
	return $util->sort( $orderby, $order, $preserve_keys );
}

/**
 * Determines if Widgets library should be loaded.
 *
 * Checks to make sure that the widgets library hasn't already been loaded.
 * If it hasn't, then it will load the widgets library and run an action hook.
 *
 * @since 2.2.0
 */
function wp_maybe_load_widgets() {
	/**
	 * Filters whether to load the Widgets library.
	 *
	 * Passing a falsey value to the filter will effectively short-circuit
	 * the Widgets library from loading.
	 *
	 * @since 2.8.0
	 *
	 * @param bool $wp_maybe_load_widgets Whether to load the Widgets library.
	 *                                    Default true.
	 */
	if ( ! apply_filters( 'load_default_widgets', true ) ) {
		return;
	}

	require_once( ABSPATH . WPINC . '/default-widgets.php' );

	add_action( '_admin_menu', 'wp_widgets_add_menu' );
}

/**
 * Append the Widgets menu to the themes main menu.
 *
 * @since 2.2.0
 *
 * @global array $submenu
 */
function wp_widgets_add_menu() {
	global $submenu;

	if ( ! current_theme_supports( 'widgets' ) )
		return;

	$submenu['themes.php'][7] = array( __( 'Widgets' ), 'edit_theme_options', 'widgets.php' );
	ksort( $submenu['themes.php'], SORT_NUMERIC );
}

/**
 * Flush all output buffers for PHP 5.2.
 *
 * Make sure all output buffers are flushed before our singletons are destroyed.
 *
 * @since 2.2.0
 */
function wp_ob_end_flush_all() {
	$levels = ob_get_level();
	for ($i=0; $i<$levels; $i++)
		ob_end_flush();
}

/**
 * Load custom DB error or display WordPress DB error.
 *
 * If a file exists in the wp-content directory named db-error.php, then it will
 * be loaded instead of displaying the WordPress DB error. If it is not found,
 * then the WordPress DB error will be displayed instead.
 *
 * The WordPress DB error sets the HTTP status header to 500 to try to prevent
 * search engines from caching the message. Custom DB messages should do the
 * same.
 *
 * This function was backported to WordPress 2.3.2, but originally was added
 * in WordPress 2.5.0.
 *
 * @since 2.3.2
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 */
function dead_db() {
	global $wpdb;

	wp_load_translations_early();

	// Load custom DB error template, if present.
	if ( file_exists( WP_CONTENT_DIR . '/db-error.php' ) ) {
		require_once( WP_CONTENT_DIR . '/db-error.php' );
		die();
	}

	// If installing or in the admin, provide the verbose message.
	if ( wp_installing() || defined( 'WP_ADMIN' ) )
		wp_die($wpdb->error);

	// Otherwise, be terse.
	status_header( 500 );
	nocache_headers();
	header( 'Content-Type: text/html; charset=utf-8' );
?>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml"<?php if ( is_rtl() ) echo ' dir="rtl"'; ?>>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
	<title><?php _e( 'Database Error' ); ?></title>

</head>
<body>
	<h1><?php _e( 'Error establishing a database connection' ); ?></h1>
</body>
</html>
<?php
	die();
}

/**
 * Convert a value to non-negative integer.
 *
 * @since 2.5.0
 *
 * @param mixed $maybeint Data you wish to have converted to a non-negative integer.
 * @return int A non-negative integer.
 */
function absint( $maybeint ) {
	return abs( intval( $maybeint ) );
}

/**
 * Mark a function as deprecated and inform when it has been used.
 *
 * There is a {@see 'hook deprecated_function_run'} that will be called that can be used
 * to get the backtrace up to what file and function called the deprecated
 * function.
 *
 * The current behavior is to trigger a user error if `WP_DEBUG` is true.
 *
 * This function is to be used in every function that is deprecated.
 *
 * @since 2.5.0
 * @access private
 *
 * @param string $function    The function that was called.
 * @param string $version     The version of WordPress that deprecated the function.
 * @param string $replacement Optional. The function that should have been called. Default null.
 */
function _deprecated_function( $function, $version, $replacement = null ) {

	/**
	 * Fires when a deprecated function is called.
	 *
	 * @since 2.5.0
	 *
	 * @param string $function    The function that was called.
	 * @param string $replacement The function that should have been called.
	 * @param string $version     The version of WordPress that deprecated the function.
	 */
	do_action( 'deprecated_function_run', $function, $replacement, $version );

	/**
	 * Filters whether to trigger an error for deprecated functions.
	 *
	 * @since 2.5.0
	 *
	 * @param bool $trigger Whether to trigger the error for deprecated functions. Default true.
	 */
	if ( WP_DEBUG && apply_filters( 'deprecated_function_trigger_error', true ) ) {
		if ( function_exists( '__' ) ) {
			if ( ! is_null( $replacement ) ) {
				/* translators: 1: PHP function name, 2: version number, 3: alternative function name */
				trigger_error( sprintf( __('%1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.'), $function, $version, $replacement ) );
			} else {
				/* translators: 1: PHP function name, 2: version number */
				trigger_error( sprintf( __('%1$s is <strong>deprecated</strong> since version %2$s with no alternative available.'), $function, $version ) );
			}
		} else {
			if ( ! is_null( $replacement ) ) {
				trigger_error( sprintf( '%1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.', $function, $version, $replacement ) );
			} else {
				trigger_error( sprintf( '%1$s is <strong>deprecated</strong> since version %2$s with no alternative available.', $function, $version ) );
			}
		}
	}
}

/**
 * Marks a constructor as deprecated and informs when it has been used.
 *
 * Similar to _deprecated_function(), but with different strings. Used to
 * remove PHP4 style constructors.
 *
 * The current behavior is to trigger a user error if `WP_DEBUG` is true.
 *
 * This function is to be used in every PHP4 style constructor method that is deprecated.
 *
 * @since 4.3.0
 * @since 4.5.0 Added the `$parent_class` parameter.
 *
 * @access private
 *
 * @param string $class        The class containing the deprecated constructor.
 * @param string $version      The version of WordPress that deprecated the function.
 * @param string $parent_class Optional. The parent class calling the deprecated constructor.
 *                             Default empty string.
 */
function _deprecated_constructor( $class, $version, $parent_class = '' ) {

	/**
	 * Fires when a deprecated constructor is called.
	 *
	 * @since 4.3.0
	 * @since 4.5.0 Added the `$parent_class` parameter.
	 *
	 * @param string $class        The class containing the deprecated constructor.
	 * @param string $version      The version of WordPress that deprecated the function.
	 * @param string $parent_class The parent class calling the deprecated constructor.
	 */
	do_action( 'deprecated_constructor_run', $class, $version, $parent_class );

	/**
	 * Filters whether to trigger an error for deprecated functions.
	 *
	 * `WP_DEBUG` must be true in addition to the filter evaluating to true.
	 *
	 * @since 4.3.0
	 *
	 * @param bool $trigger Whether to trigger the error for deprecated functions. Default true.
	 */
	if ( WP_DEBUG && apply_filters( 'deprecated_constructor_trigger_error', true ) ) {
		if ( function_exists( '__' ) ) {
			if ( ! empty( $parent_class ) ) {
				/* translators: 1: PHP class name, 2: PHP parent class name, 3: version number, 4: __construct() method */
				trigger_error( sprintf( __( 'The called constructor method for %1$s in %2$s is <strong>deprecated</strong> since version %3$s! Use %4$s instead.' ),
					$class, $parent_class, $version, '<pre>__construct()</pre>' ) );
			} else {
				/* translators: 1: PHP class name, 2: version number, 3: __construct() method */
				trigger_error( sprintf( __( 'The called constructor method for %1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.' ),
					$class, $version, '<pre>__construct()</pre>' ) );
			}
		} else {
			if ( ! empty( $parent_class ) ) {
				trigger_error( sprintf( 'The called constructor method for %1$s in %2$s is <strong>deprecated</strong> since version %3$s! Use %4$s instead.',
					$class, $parent_class, $version, '<pre>__construct()</pre>' ) );
			} else {
				trigger_error( sprintf( 'The called constructor method for %1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.',
					$class, $version, '<pre>__construct()</pre>' ) );
			}
		}
	}

}

/**
 * Mark a file as deprecated and inform when it has been used.
 *
 * There is a hook {@see 'deprecated_file_included'} that will be called that can be used
 * to get the backtrace up to what file and function included the deprecated
 * file.
 *
 * The current behavior is to trigger a user error if `WP_DEBUG` is true.
 *
 * This function is to be used in every file that is deprecated.
 *
 * @since 2.5.0
 * @access private
 *
 * @param string $file        The file that was included.
 * @param string $version     The version of WordPress that deprecated the file.
 * @param string $replacement Optional. The file that should have been included based on ABSPATH.
 *                            Default null.
 * @param string $message     Optional. A message regarding the change. Default empty.
 */
function _deprecated_file( $file, $version, $replacement = null, $message = '' ) {

	/**
	 * Fires when a deprecated file is called.
	 *
	 * @since 2.5.0
	 *
	 * @param string $file        The file that was called.
	 * @param string $replacement The file that should have been included based on ABSPATH.
	 * @param string $version     The version of WordPress that deprecated the file.
	 * @param string $message     A message regarding the change.
	 */
	do_action( 'deprecated_file_included', $file, $replacement, $version, $message );

	/**
	 * Filters whether to trigger an error for deprecated files.
	 *
	 * @since 2.5.0
	 *
	 * @param bool $trigger Whether to trigger the error for deprecated files. Default true.
	 */
	if ( WP_DEBUG && apply_filters( 'deprecated_file_trigger_error', true ) ) {
		$message = empty( $message ) ? '' : ' ' . $message;
		if ( function_exists( '__' ) ) {
			if ( ! is_null( $replacement ) ) {
				/* translators: 1: PHP file name, 2: version number, 3: alternative file name */
				trigger_error( sprintf( __('%1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.'), $file, $version, $replacement ) . $message );
			} else {
				/* translators: 1: PHP file name, 2: version number */
				trigger_error( sprintf( __('%1$s is <strong>deprecated</strong> since version %2$s with no alternative available.'), $file, $version ) . $message );
			}
		} else {
			if ( ! is_null( $replacement ) ) {
				trigger_error( sprintf( '%1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.', $file, $version, $replacement ) . $message );
			} else {
				trigger_error( sprintf( '%1$s is <strong>deprecated</strong> since version %2$s with no alternative available.', $file, $version ) . $message );
			}
		}
	}
}
/**
 * Mark a function argument as deprecated and inform when it has been used.
 *
 * This function is to be used whenever a deprecated function argument is used.
 * Before this function is called, the argument must be checked for whether it was
 * used by comparing it to its default value or evaluating whether it is empty.
 * For example:
 *
 *     if ( ! empty( $deprecated ) ) {
 *         _deprecated_argument( __FUNCTION__, '3.0.0' );
 *     }
 *
 *
 * There is a hook deprecated_argument_run that will be called that can be used
 * to get the backtrace up to what file and function used the deprecated
 * argument.
 *
 * The current behavior is to trigger a user error if WP_DEBUG is true.
 *
 * @since 3.0.0
 * @access private
 *
 * @param string $function The function that was called.
 * @param string $version  The version of WordPress that deprecated the argument used.
 * @param string $message  Optional. A message regarding the change. Default null.
 */
function _deprecated_argument( $function, $version, $message = null ) {

	/**
	 * Fires when a deprecated argument is called.
	 *
	 * @since 3.0.0
	 *
	 * @param string $function The function that was called.
	 * @param string $message  A message regarding the change.
	 * @param string $version  The version of WordPress that deprecated the argument used.
	 */
	do_action( 'deprecated_argument_run', $function, $message, $version );

	/**
	 * Filters whether to trigger an error for deprecated arguments.
	 *
	 * @since 3.0.0
	 *
	 * @param bool $trigger Whether to trigger the error for deprecated arguments. Default true.
	 */
	if ( WP_DEBUG && apply_filters( 'deprecated_argument_trigger_error', true ) ) {
		if ( function_exists( '__' ) ) {
			if ( ! is_null( $message ) ) {
				/* translators: 1: PHP function name, 2: version number, 3: optional message regarding the change */
				trigger_error( sprintf( __('%1$s was called with an argument that is <strong>deprecated</strong> since version %2$s! %3$s'), $function, $version, $message ) );
			} else {
				/* translators: 1: PHP function name, 2: version number */
				trigger_error( sprintf( __('%1$s was called with an argument that is <strong>deprecated</strong> since version %2$s with no alternative available.'), $function, $version ) );
			}
		} else {
			if ( ! is_null( $message ) ) {
				trigger_error( sprintf( '%1$s was called with an argument that is <strong>deprecated</strong> since version %2$s! %3$s', $function, $version, $message ) );
			} else {
				trigger_error( sprintf( '%1$s was called with an argument that is <strong>deprecated</strong> since version %2$s with no alternative available.', $function, $version ) );
			}
		}
	}
}

/**
 * Marks a deprecated action or filter hook as deprecated and throws a notice.
 *
 * Use the {@see 'deprecated_hook_run'} action to get the backtrace describing where
 * the deprecated hook was called.
 *
 * Default behavior is to trigger a user error if `WP_DEBUG` is true.
 *
 * This function is called by the do_action_deprecated() and apply_filters_deprecated()
 * functions, and so generally does not need to be called directly.
 *
 * @since 4.6.0
 * @access private
 *
 * @param string $hook        The hook that was used.
 * @param string $version     The version of WordPress that deprecated the hook.
 * @param string $replacement Optional. The hook that should have been used.
 * @param string $message     Optional. A message regarding the change.
 */
function _deprecated_hook( $hook, $version, $replacement = null, $message = null ) {
	/**
	 * Fires when a deprecated hook is called.
	 *
	 * @since 4.6.0
	 *
	 * @param string $hook        The hook that was called.
	 * @param string $replacement The hook that should be used as a replacement.
	 * @param string $version     The version of WordPress that deprecated the argument used.
	 * @param string $message     A message regarding the change.
	 */
	do_action( 'deprecated_hook_run', $hook, $replacement, $version, $message );

	/**
	 * Filters whether to trigger deprecated hook errors.
	 *
	 * @since 4.6.0
	 *
	 * @param bool $trigger Whether to trigger deprecated hook errors. Requires
	 *                      `WP_DEBUG` to be defined true.
	 */
	if ( WP_DEBUG && apply_filters( 'deprecated_hook_trigger_error', true ) ) {
		$message = empty( $message ) ? '' : ' ' . $message;
		if ( ! is_null( $replacement ) ) {
			/* translators: 1: WordPress hook name, 2: version number, 3: alternative hook name */
			trigger_error( sprintf( __( '%1$s is <strong>deprecated</strong> since version %2$s! Use %3$s instead.' ), $hook, $version, $replacement ) . $message );
		} else {
			/* translators: 1: WordPress hook name, 2: version number */
			trigger_error( sprintf( __( '%1$s is <strong>deprecated</strong> since version %2$s with no alternative available.' ), $hook, $version ) . $message );
		}
	}
}

/**
 * Mark something as being incorrectly called.
 *
 * There is a hook {@see 'doing_it_wrong_run'} that will be called that can be used
 * to get the backtrace up to what file and function called the deprecated
 * function.
 *
 * The current behavior is to trigger a user error if `WP_DEBUG` is true.
 *
 * @since 3.1.0
 * @access private
 *
 * @param string $function The function that was called.
 * @param string $message  A message explaining what has been done incorrectly.
 * @param string $version  The version of WordPress where the message was added.
 */
function _doing_it_wrong( $function, $message, $version ) {

	/**
	 * Fires when the given function is being used incorrectly.
	 *
	 * @since 3.1.0
	 *
	 * @param string $function The function that was called.
	 * @param string $message  A message explaining what has been done incorrectly.
	 * @param string $version  The version of WordPress where the message was added.
	 */
	do_action( 'doing_it_wrong_run', $function, $message, $version );

	/**
	 * Filters whether to trigger an error for _doing_it_wrong() calls.
	 *
	 * @since 3.1.0
	 *
	 * @param bool $trigger Whether to trigger the error for _doing_it_wrong() calls. Default true.
	 */
	if ( WP_DEBUG && apply_filters( 'doing_it_wrong_trigger_error', true ) ) {
		if ( function_exists( '__' ) ) {
			if ( is_null( $version ) ) {
				$version = '';
			} else {
				/* translators: %s: version number */
				$version = sprintf( __( '(This message was added in version %s.)' ), $version );
			}
			/* translators: %s: Codex URL */
			$message .= ' ' . sprintf( __( 'Please see <a href="%s">Debugging in WordPress</a> for more information.' ),
				__( 'https://codex.wordpress.org/Debugging_in_WordPress' )
			);
			/* translators: Developer debugging message. 1: PHP function name, 2: Explanatory message, 3: Version information message */
			trigger_error( sprintf( __( '%1$s was called <strong>incorrectly</strong>. %2$s %3$s' ), $function, $message, $version ) );
		} else {
			if ( is_null( $version ) ) {
				$version = '';
			} else {
				$version = sprintf( '(This message was added in version %s.)', $version );
			}
			$message .= sprintf( ' Please see <a href="%s">Debugging in WordPress</a> for more information.',
				'https://codex.wordpress.org/Debugging_in_WordPress'
			);
			trigger_error( sprintf( '%1$s was called <strong>incorrectly</strong>. %2$s %3$s', $function, $message, $version ) );
		}
	}
}

/**
 * Is the server running earlier than 1.5.0 version of lighttpd?
 *
 * @since 2.5.0
 *
 * @return bool Whether the server is running lighttpd < 1.5.0.
 */
function is_lighttpd_before_150() {
	$server_parts = explode( '/', isset( $_SERVER['SERVER_SOFTWARE'] )? $_SERVER['SERVER_SOFTWARE'] : '' );
	$server_parts[1] = isset( $server_parts[1] )? $server_parts[1] : '';
	return  'lighttpd' == $server_parts[0] && -1 == version_compare( $server_parts[1], '1.5.0' );
}

/**
 * Does the specified module exist in the Apache config?
 *
 * @since 2.5.0
 *
 * @global bool $is_apache
 *
 * @param string $mod     The module, e.g. mod_rewrite.
 * @param bool   $default Optional. The default return value if the module is not found. Default false.
 * @return bool Whether the specified module is loaded.
 */
function apache_mod_loaded($mod, $default = false) {
	global $is_apache;

	if ( !$is_apache )
		return false;

	if ( function_exists( 'apache_get_modules' ) ) {
		$mods = apache_get_modules();
		if ( in_array($mod, $mods) )
			return true;
	} elseif ( function_exists( 'phpinfo' ) && false === strpos( ini_get( 'disable_functions' ), 'phpinfo' ) ) {
			ob_start();
			phpinfo(8);
			$phpinfo = ob_get_clean();
			if ( false !== strpos($phpinfo, $mod) )
				return true;
	}
	return $default;
}

/**
 * Check if IIS 7+ supports pretty permalinks.
 *
 * @since 2.8.0
 *
 * @global bool $is_iis7
 *
 * @return bool Whether IIS7 supports permalinks.
 */
function iis7_supports_permalinks() {
	global $is_iis7;

	$supports_permalinks = false;
	if ( $is_iis7 ) {
		/* First we check if the DOMDocument class exists. If it does not exist, then we cannot
		 * easily update the xml configuration file, hence we just bail out and tell user that
		 * pretty permalinks cannot be used.
		 *
		 * Next we check if the URL Rewrite Module 1.1 is loaded and enabled for the web site. When
		 * URL Rewrite 1.1 is loaded it always sets a server variable called 'IIS_UrlRewriteModule'.
		 * Lastly we make sure that PHP is running via FastCGI. This is important because if it runs
		 * via ISAPI then pretty permalinks will not work.
		 */
		$supports_permalinks = class_exists( 'DOMDocument', false ) && isset($_SERVER['IIS_UrlRewriteModule']) && ( PHP_SAPI == 'cgi-fcgi' );
	}

	/**
	 * Filters whether IIS 7+ supports pretty permalinks.
	 *
	 * @since 2.8.0
	 *
	 * @param bool $supports_permalinks Whether IIS7 supports permalinks. Default false.
	 */
	return apply_filters( 'iis7_supports_permalinks', $supports_permalinks );
}

/**
 * File validates against allowed set of defined rules.
 *
 * A return value of '1' means that the $file contains either '..' or './'. A
 * return value of '2' means that the $file contains ':' after the first
 * character. A return value of '3' means that the file is not in the allowed
 * files list.
 *
 * @since 1.2.0
 *
 * @param string $file File path.
 * @param array  $allowed_files List of allowed files.
 * @return int 0 means nothing is wrong, greater than 0 means something was wrong.
 */
function validate_file( $file, $allowed_files = '' ) {
	if ( false !== strpos( $file, '..' ) )
		return 1;

	if ( false !== strpos( $file, './' ) )
		return 1;

	if ( ! empty( $allowed_files ) && ! in_array( $file, $allowed_files ) )
		return 3;

	if (':' == substr( $file, 1, 1 ) )
		return 2;

	return 0;
}

/**
 * Whether to force SSL used for the Administration Screens.
 *
 * @since 2.6.0
 *
 * @staticvar bool $forced
 *
 * @param string|bool $force Optional. Whether to force SSL in admin screens. Default null.
 * @return bool True if forced, false if not forced.
 */
function force_ssl_admin( $force = null ) {
	static $forced = false;

	if ( !is_null( $force ) ) {
		$old_forced = $forced;
		$forced = $force;
		return $old_forced;
	}

	return $forced;
}

/**
 * Guess the URL for the site.
 *
 * Will remove wp-admin links to retrieve only return URLs not in the wp-admin
 * directory.
 *
 * @since 2.6.0
 *
 * @return string The guessed URL.
 */
function wp_guess_url() {
	if ( defined('WP_SITEURL') && '' != WP_SITEURL ) {
		$url = WP_SITEURL;
	} else {
		$abspath_fix = str_replace( '\\', '/', ABSPATH );
		$script_filename_dir = dirname( $_SERVER['SCRIPT_FILENAME'] );

		// The request is for the admin
		if ( strpos( $_SERVER['REQUEST_URI'], 'wp-admin' ) !== false || strpos( $_SERVER['REQUEST_URI'], 'wp-login.php' ) !== false ) {
			$path = preg_replace( '#/(wp-admin/.*|wp-login.php)#i', '', $_SERVER['REQUEST_URI'] );

		// The request is for a file in ABSPATH
		} elseif ( $script_filename_dir . '/' == $abspath_fix ) {
			// Strip off any file/query params in the path
			$path = preg_replace( '#/[^/]*$#i', '', $_SERVER['PHP_SELF'] );

		} else {
			if ( false !== strpos( $_SERVER['SCRIPT_FILENAME'], $abspath_fix ) ) {
				// Request is hitting a file inside ABSPATH
				$directory = str_replace( ABSPATH, '', $script_filename_dir );
				// Strip off the sub directory, and any file/query params
				$path = preg_replace( '#/' . preg_quote( $directory, '#' ) . '/[^/]*$#i', '' , $_SERVER['REQUEST_URI'] );
			} elseif ( false !== strpos( $abspath_fix, $script_filename_dir ) ) {
				// Request is hitting a file above ABSPATH
				$subdirectory = substr( $abspath_fix, strpos( $abspath_fix, $script_filename_dir ) + strlen( $script_filename_dir ) );
				// Strip off any file/query params from the path, appending the sub directory to the install
				$path = preg_replace( '#/[^/]*$#i', '' , $_SERVER['REQUEST_URI'] ) . $subdirectory;
			} else {
				$path = $_SERVER['REQUEST_URI'];
			}
		}

		$schema = is_ssl() ? 'https://' : 'http://'; // set_url_scheme() is not defined yet
		$url = $schema . $_SERVER['HTTP_HOST'] . $path;
	}

	return rtrim($url, '/');
}

/**
 * Temporarily suspend cache additions.
 *
 * Stops more data being added to the cache, but still allows cache retrieval.
 * This is useful for actions, such as imports, when a lot of data would otherwise
 * be almost uselessly added to the cache.
 *
 * Suspension lasts for a single page load at most. Remember to call this
 * function again if you wish to re-enable cache adds earlier.
 *
 * @since 3.3.0
 *
 * @staticvar bool $_suspend
 *
 * @param bool $suspend Optional. Suspends additions if true, re-enables them if false.
 * @return bool The current suspend setting
 */
function wp_suspend_cache_addition( $suspend = null ) {
	static $_suspend = false;

	if ( is_bool( $suspend ) )
		$_suspend = $suspend;

	return $_suspend;
}

/**
 * Suspend cache invalidation.
 *
 * Turns cache invalidation on and off. Useful during imports where you don't wont to do
 * invalidations every time a post is inserted. Callers must be sure that what they are
 * doing won't lead to an inconsistent cache when invalidation is suspended.
 *
 * @since 2.7.0
 *
 * @global bool $_wp_suspend_cache_invalidation
 *
 * @param bool $suspend Optional. Whether to suspend or enable cache invalidation. Default true.
 * @return bool The current suspend setting.
 */
function wp_suspend_cache_invalidation( $suspend = true ) {
	global $_wp_suspend_cache_invalidation;

	$current_suspend = $_wp_suspend_cache_invalidation;
	$_wp_suspend_cache_invalidation = $suspend;
	return $current_suspend;
}

/**
 * Determine whether a site is the main site of the current network.
 *
 * @since 3.0.0
 *
 * @param int $site_id Optional. Site ID to test. Defaults to current site.
 * @return bool True if $site_id is the main site of the network, or if not
 *              running Multisite.
 */
function is_main_site( $site_id = null ) {
	if ( ! is_multisite() )
		return true;

	if ( ! $site_id )
		$site_id = get_current_blog_id();

	return (int) $site_id === (int) get_network()->site_id;
}

/**
 * Determine whether a network is the main network of the Multisite install.
 *
 * @since 3.7.0
 *
 * @param int $network_id Optional. Network ID to test. Defaults to current network.
 * @return bool True if $network_id is the main network, or if not running Multisite.
 */
function is_main_network( $network_id = null ) {
	if ( ! is_multisite() ) {
		return true;
	}

	if ( null === $network_id ) {
		$network_id = get_current_network_id();
	}

	$network_id = (int) $network_id;

	return ( $network_id === get_main_network_id() );
}

/**
 * Get the main network ID.
 *
 * @since 4.3.0
 *
 * @return int The ID of the main network.
 */
function get_main_network_id() {
	if ( ! is_multisite() ) {
		return 1;
	}

	$current_network = get_network();

	if ( defined( 'PRIMARY_NETWORK_ID' ) ) {
		$main_network_id = PRIMARY_NETWORK_ID;
	} elseif ( isset( $current_network->id ) && 1 === (int) $current_network->id ) {
		// If the current network has an ID of 1, assume it is the main network.
		$main_network_id = 1;
	} else {
		$_networks = get_networks( array( 'fields' => 'ids', 'number' => 1 ) );
		$main_network_id = array_shift( $_networks );
	}

	/**
	 * Filters the main network ID.
	 *
	 * @since 4.3.0
	 *
	 * @param int $main_network_id The ID of the main network.
	 */
	return (int) apply_filters( 'get_main_network_id', $main_network_id );
}

/**
 * Determine whether global terms are enabled.
 *
 * @since 3.0.0
 *
 * @staticvar bool $global_terms
 *
 * @return bool True if multisite and global terms enabled.
 */
function global_terms_enabled() {
	if ( ! is_multisite() )
		return false;

	static $global_terms = null;
	if ( is_null( $global_terms ) ) {

		/**
		 * Filters whether global terms are enabled.
		 *
		 * Passing a non-null value to the filter will effectively short-circuit the function,
		 * returning the value of the 'global_terms_enabled' site option instead.
		 *
		 * @since 3.0.0
		 *
		 * @param null $enabled Whether global terms are enabled.
		 */
		$filter = apply_filters( 'global_terms_enabled', null );
		if ( ! is_null( $filter ) )
			$global_terms = (bool) $filter;
		else
			$global_terms = (bool) get_site_option( 'global_terms_enabled', false );
	}
	return $global_terms;
}

/**
 * gmt_offset modification for smart timezone handling.
 *
 * Overrides the gmt_offset option if we have a timezone_string available.
 *
 * @since 2.8.0
 *
 * @return float|false Timezone GMT offset, false otherwise.
 */
function wp_timezone_override_offset() {
	if ( !$timezone_string = get_option( 'timezone_string' ) ) {
		return false;
	}

	$timezone_object = timezone_open( $timezone_string );
	$datetime_object = date_create();
	if ( false === $timezone_object || false === $datetime_object ) {
		return false;
	}
	return round( timezone_offset_get( $timezone_object, $datetime_object ) / HOUR_IN_SECONDS, 2 );
}

/**
 * Sort-helper for timezones.
 *
 * @since 2.9.0
 * @access private
 *
 * @param array $a
 * @param array $b
 * @return int
 */
function _wp_timezone_choice_usort_callback( $a, $b ) {
	// Don't use translated versions of Etc
	if ( 'Etc' === $a['continent'] && 'Etc' === $b['continent'] ) {
		// Make the order of these more like the old dropdown
		if ( 'GMT+' === substr( $a['city'], 0, 4 ) && 'GMT+' === substr( $b['city'], 0, 4 ) ) {
			return -1 * ( strnatcasecmp( $a['city'], $b['city'] ) );
		}
		if ( 'UTC' === $a['city'] ) {
			if ( 'GMT+' === substr( $b['city'], 0, 4 ) ) {
				return 1;
			}
			return -1;
		}
		if ( 'UTC' === $b['city'] ) {
			if ( 'GMT+' === substr( $a['city'], 0, 4 ) ) {
				return -1;
			}
			return 1;
		}
		return strnatcasecmp( $a['city'], $b['city'] );
	}
	if ( $a['t_continent'] == $b['t_continent'] ) {
		if ( $a['t_city'] == $b['t_city'] ) {
			return strnatcasecmp( $a['t_subcity'], $b['t_subcity'] );
		}
		return strnatcasecmp( $a['t_city'], $b['t_city'] );
	} else {
		// Force Etc to the bottom of the list
		if ( 'Etc' === $a['continent'] ) {
			return 1;
		}
		if ( 'Etc' === $b['continent'] ) {
			return -1;
		}
		return strnatcasecmp( $a['t_continent'], $b['t_continent'] );
	}
}

/**
 * Gives a nicely-formatted list of timezone strings.
 *
 * @since 2.9.0
 * @since 4.7.0 Added the `$locale` parameter.
 *
 * @staticvar bool $mo_loaded
 * @staticvar string $locale_loaded
 *
 * @param string $selected_zone Selected timezone.
 * @param string $locale        Optional. Locale to load the timezones in. Default current site locale.
 * @return string
 */
function wp_timezone_choice( $selected_zone, $locale = null ) {
	static $mo_loaded = false, $locale_loaded = null;

	$continents = array( 'Africa', 'America', 'Antarctica', 'Arctic', 'Asia', 'Atlantic', 'Australia', 'Europe', 'Indian', 'Pacific');

	// Load translations for continents and cities.
	if ( ! $mo_loaded || $locale !== $locale_loaded ) {
		$locale_loaded = $locale ? $locale : get_locale();
		$mofile = WP_LANG_DIR . '/continents-cities-' . $locale_loaded . '.mo';
		unload_textdomain( 'continents-cities' );
		load_textdomain( 'continents-cities', $mofile );
		$mo_loaded = true;
	}

	$zonen = array();
	foreach ( timezone_identifiers_list() as $zone ) {
		$zone = explode( '/', $zone );
		if ( !in_array( $zone[0], $continents ) ) {
			continue;
		}

		// This determines what gets set and translated - we don't translate Etc/* strings here, they are done later
		$exists = array(
			0 => ( isset( $zone[0] ) && $zone[0] ),
			1 => ( isset( $zone[1] ) && $zone[1] ),
			2 => ( isset( $zone[2] ) && $zone[2] ),
		);
		$exists[3] = ( $exists[0] && 'Etc' !== $zone[0] );
		$exists[4] = ( $exists[1] && $exists[3] );
		$exists[5] = ( $exists[2] && $exists[3] );

		$zonen[] = array(
			'continent'   => ( $exists[0] ? $zone[0] : '' ),
			'city'        => ( $exists[1] ? $zone[1] : '' ),
			'subcity'     => ( $exists[2] ? $zone[2] : '' ),
			't_continent' => ( $exists[3] ? translate( str_replace( '_', ' ', $zone[0] ), 'continents-cities' ) : '' ),
			't_city'      => ( $exists[4] ? translate( str_replace( '_', ' ', $zone[1] ), 'continents-cities' ) : '' ),
			't_subcity'   => ( $exists[5] ? translate( str_replace( '_', ' ', $zone[2] ), 'continents-cities' ) : '' )
		);
	}
	usort( $zonen, '_wp_timezone_choice_usort_callback' );

	$structure = array();

	if ( empty( $selected_zone ) ) {
		$structure[] = '<option selected="selected" value="">' . __( 'Select a city' ) . '</option>';
	}

	foreach ( $zonen as $key => $zone ) {
		// Build value in an array to join later
		$value = array( $zone['continent'] );

		if ( empty( $zone['city'] ) ) {
			// It's at the continent level (generally won't happen)
			$display = $zone['t_continent'];
		} else {
			// It's inside a continent group

			// Continent optgroup
			if ( !isset( $zonen[$key - 1] ) || $zonen[$key - 1]['continent'] !== $zone['continent'] ) {
				$label = $zone['t_continent'];
				$structure[] = '<optgroup label="'. esc_attr( $label ) .'">';
			}

			// Add the city to the value
			$value[] = $zone['city'];

			$display = $zone['t_city'];
			if ( !empty( $zone['subcity'] ) ) {
				// Add the subcity to the value
				$value[] = $zone['subcity'];
				$display .= ' - ' . $zone['t_subcity'];
			}
		}

		// Build the value
		$value = join( '/', $value );
		$selected = '';
		if ( $value === $selected_zone ) {
			$selected = 'selected="selected" ';
		}
		$structure[] = '<option ' . $selected . 'value="' . esc_attr( $value ) . '">' . esc_html( $display ) . "</option>";

		// Close continent optgroup
		if ( !empty( $zone['city'] ) && ( !isset($zonen[$key + 1]) || (isset( $zonen[$key + 1] ) && $zonen[$key + 1]['continent'] !== $zone['continent']) ) ) {
			$structure[] = '</optgroup>';
		}
	}

	// Do UTC
	$structure[] = '<optgroup label="'. esc_attr__( 'UTC' ) .'">';
	$selected = '';
	if ( 'UTC' === $selected_zone )
		$selected = 'selected="selected" ';
	$structure[] = '<option ' . $selected . 'value="' . esc_attr( 'UTC' ) . '">' . __('UTC') . '</option>';
	$structure[] = '</optgroup>';

	// Do manual UTC offsets
	$structure[] = '<optgroup label="'. esc_attr__( 'Manual Offsets' ) .'">';
	$offset_range = array (-12, -11.5, -11, -10.5, -10, -9.5, -9, -8.5, -8, -7.5, -7, -6.5, -6, -5.5, -5, -4.5, -4, -3.5, -3, -2.5, -2, -1.5, -1, -0.5,
		0, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 5.75, 6, 6.5, 7, 7.5, 8, 8.5, 8.75, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.75, 13, 13.75, 14);
	foreach ( $offset_range as $offset ) {
		if ( 0 <= $offset )
			$offset_name = '+' . $offset;
		else
			$offset_name = (string) $offset;

		$offset_value = $offset_name;
		$offset_name = str_replace(array('.25','.5','.75'), array(':15',':30',':45'), $offset_name);
		$offset_name = 'UTC' . $offset_name;
		$offset_value = 'UTC' . $offset_value;
		$selected = '';
		if ( $offset_value === $selected_zone )
			$selected = 'selected="selected" ';
		$structure[] = '<option ' . $selected . 'value="' . esc_attr( $offset_value ) . '">' . esc_html( $offset_name ) . "</option>";

	}
	$structure[] = '</optgroup>';

	return join( "\n", $structure );
}

/**
 * Strip close comment and close php tags from file headers used by WP.
 *
 * @since 2.8.0
 * @access private
 *
 * @see https://core.trac.wordpress.org/ticket/8497
 *
 * @param string $str Header comment to clean up.
 * @return string
 */
function _cleanup_header_comment( $str ) {
	return trim(preg_replace("/\s*(?:\*\/|\?>).*/", '', $str));
}

/**
 * Permanently delete comments or posts of any type that have held a status
 * of 'trash' for the number of days defined in EMPTY_TRASH_DAYS.
 *
 * The default value of `EMPTY_TRASH_DAYS` is 30 (days).
 *
 * @since 2.9.0
 *
 * @global wpdb $wpdb WordPress database abstraction object.
 */
function wp_scheduled_delete() {
	global $wpdb;

	$delete_timestamp = time() - ( DAY_IN_SECONDS * EMPTY_TRASH_DAYS );

	$posts_to_delete = $wpdb->get_results($wpdb->prepare("SELECT post_id FROM $wpdb->postmeta WHERE meta_key = '_wp_trash_meta_time' AND meta_value < '%d'", $delete_timestamp), ARRAY_A);

	foreach ( (array) $posts_to_delete as $post ) {
		$post_id = (int) $post['post_id'];
		if ( !$post_id )
			continue;

		$del_post = get_post($post_id);

		if ( !$del_post || 'trash' != $del_post->post_status ) {
			delete_post_meta($post_id, '_wp_trash_meta_status');
			delete_post_meta($post_id, '_wp_trash_meta_time');
		} else {
			wp_delete_post($post_id);
		}
	}

	$comments_to_delete = $wpdb->get_results($wpdb->prepare("SELECT comment_id FROM $wpdb->commentmeta WHERE meta_key = '_wp_trash_meta_time' AND meta_value < '%d'", $delete_timestamp), ARRAY_A);

	foreach ( (array) $comments_to_delete as $comment ) {
		$comment_id = (int) $comment['comment_id'];
		if ( !$comment_id )
			continue;

		$del_comment = get_comment($comment_id);

		if ( !$del_comment || 'trash' != $del_comment->comment_approved ) {
			delete_comment_meta($comment_id, '_wp_trash_meta_time');
			delete_comment_meta($comment_id, '_wp_trash_meta_status');
		} else {
			wp_delete_comment( $del_comment );
		}
	}
}

/**
 * Retrieve metadata from a file.
 *
 * Searches for metadata in the first 8kiB of a file, such as a plugin or theme.
 * Each piece of metadata must be on its own line. Fields can not span multiple
 * lines, the value will get cut at the end of the first line.
 *
 * If the file data is not within that first 8kiB, then the author should correct
 * their plugin file and move the data headers to the top.
 *
 * @link https://codex.wordpress.org/File_Header
 *
 * @since 2.9.0
 *
 * @param string $file            Path to the file.
 * @param array  $default_headers List of headers, in the format array('HeaderKey' => 'Header Name').
 * @param string $context         Optional. If specified adds filter hook {@see 'extra_$context_headers'}.
 *                                Default empty.
 * @return array Array of file headers in `HeaderKey => Header Value` format.
 */
function get_file_data( $file, $default_headers, $context = '' ) {
	// We don't need to write to the file, so just open for reading.
	$fp = fopen( $file, 'r' );

	// Pull only the first 8kiB of the file in.
	$file_data = fread( $fp, 8192 );

	// PHP will close file handle, but we are good citizens.
	fclose( $fp );

	// Make sure we catch CR-only line endings.
	$file_data = str_replace( "\r", "\n", $file_data );

	/**
	 * Filters extra file headers by context.
	 *
	 * The dynamic portion of the hook name, `$context`, refers to
	 * the context where extra headers might be loaded.
	 *
	 * @since 2.9.0
	 *
	 * @param array $extra_context_headers Empty array by default.
	 */
	if ( $context && $extra_headers = apply_filters( "extra_{$context}_headers", array() ) ) {
		$extra_headers = array_combine( $extra_headers, $extra_headers ); // keys equal values
		$all_headers = array_merge( $extra_headers, (array) $default_headers );
	} else {
		$all_headers = $default_headers;
	}

	foreach ( $all_headers as $field => $regex ) {
		if ( preg_match( '/^[ \t\/*#@]*' . preg_quote( $regex, '/' ) . ':(.*)$/mi', $file_data, $match ) && $match[1] )
			$all_headers[ $field ] = _cleanup_header_comment( $match[1] );
		else
			$all_headers[ $field ] = '';
	}

	return $all_headers;
}

/**
 * Returns true.
 *
 * Useful for returning true to filters easily.
 *
 * @since 3.0.0
 *
 * @see __return_false()
 *
 * @return true True.
 */
function __return_true() {
	return true;
}

/**
 * Returns false.
 *
 * Useful for returning false to filters easily.
 *
 * @since 3.0.0
 *
 * @see __return_true()
 *
 * @return false False.
 */
function __return_false() {
	return false;
}

/**
 * Returns 0.
 *
 * Useful for returning 0 to filters easily.
 *
 * @since 3.0.0
 *
 * @return int 0.
 */
function __return_zero() {
	return 0;
}

/**
 * Returns an empty array.
 *
 * Useful for returning an empty array to filters easily.
 *
 * @since 3.0.0
 *
 * @return array Empty array.
 */
function __return_empty_array() {
	return array();
}

/**
 * Returns null.
 *
 * Useful for returning null to filters easily.
 *
 * @since 3.4.0
 *
 * @return null Null value.
 */
function __return_null() {
	return null;
}

/**
 * Returns an empty string.
 *
 * Useful for returning an empty string to filters easily.
 *
 * @since 3.7.0
 *
 * @see __return_null()
 *
 * @return string Empty string.
 */
function __return_empty_string() {
	return '';
}

/**
 * Send a HTTP header to disable content type sniffing in browsers which support it.
 *
 * @since 3.0.0
 *
 * @see https://blogs.msdn.com/ie/archive/2008/07/02/ie8-security-part-v-comprehensive-protection.aspx
 * @see https://src.chromium.org/viewvc/chrome?view=rev&revision=6985
 */
function send_nosniff_header() {
	@header( 'X-Content-Type-Options: nosniff' );
}

/**
 * Return a MySQL expression for selecting the week number based on the start_of_week option.
 *
 * @ignore
 * @since 3.0.0
 *
 * @param string $column Database column.
 * @return string SQL clause.
 */
function _wp_mysql_week( $column ) {
	switch ( $start_of_week = (int) get_option( 'start_of_week' ) ) {
	case 1 :
		return "WEEK( $column, 1 )";
	case 2 :
	case 3 :
	case 4 :
	case 5 :
	case 6 :
		return "WEEK( DATE_SUB( $column, INTERVAL $start_of_week DAY ), 0 )";
	case 0 :
	default :
		return "WEEK( $column, 0 )";
	}
}

/**
 * Find hierarchy loops using a callback function that maps object IDs to parent IDs.
 *
 * @since 3.1.0
 * @access private
 *
 * @param callable $callback      Function that accepts ( ID, $callback_args ) and outputs parent_ID.
 * @param int      $start         The ID to start the loop check at.
 * @param int      $start_parent  The parent_ID of $start to use instead of calling $callback( $start ).
 *                                Use null to always use $callback
 * @param array    $callback_args Optional. Additional arguments to send to $callback.
 * @return array IDs of all members of loop.
 */
function wp_find_hierarchy_loop( $callback, $start, $start_parent, $callback_args = array() ) {
	$override = is_null( $start_parent ) ? array() : array( $start => $start_parent );

	if ( !$arbitrary_loop_member = wp_find_hierarchy_loop_tortoise_hare( $callback, $start, $override, $callback_args ) )
		return array();

	return wp_find_hierarchy_loop_tortoise_hare( $callback, $arbitrary_loop_member, $override, $callback_args, true );
}

/**
 * Use the "The Tortoise and the Hare" algorithm to detect loops.
 *
 * For every step of the algorithm, the hare takes two steps and the tortoise one.
 * If the hare ever laps the tortoise, there must be a loop.
 *
 * @since 3.1.0
 * @access private
 *
 * @param callable $callback      Function that accepts ( ID, callback_arg, ... ) and outputs parent_ID.
 * @param int      $start         The ID to start the loop check at.
 * @param array    $override      Optional. An array of ( ID => parent_ID, ... ) to use instead of $callback.
 *                                Default empty array.
 * @param array    $callback_args Optional. Additional arguments to send to $callback. Default empty array.
 * @param bool     $_return_loop  Optional. Return loop members or just detect presence of loop? Only set
 *                                to true if you already know the given $start is part of a loop (otherwise
 *                                the returned array might include branches). Default false.
 * @return mixed Scalar ID of some arbitrary member of the loop, or array of IDs of all members of loop if
 *               $_return_loop
 */
function wp_find_hierarchy_loop_tortoise_hare( $callback, $start, $override = array(), $callback_args = array(), $_return_loop = false ) {
	$tortoise = $hare = $evanescent_hare = $start;
	$return = array();

	// Set evanescent_hare to one past hare
	// Increment hare two steps
	while (
		$tortoise
	&&
		( $evanescent_hare = isset( $override[$hare] ) ? $override[$hare] : call_user_func_array( $callback, array_merge( array( $hare ), $callback_args ) ) )
	&&
		( $hare = isset( $override[$evanescent_hare] ) ? $override[$evanescent_hare] : call_user_func_array( $callback, array_merge( array( $evanescent_hare ), $callback_args ) ) )
	) {
		if ( $_return_loop )
			$return[$tortoise] = $return[$evanescent_hare] = $return[$hare] = true;

		// tortoise got lapped - must be a loop
		if ( $tortoise == $evanescent_hare || $tortoise == $hare )
			return $_return_loop ? $return : $tortoise;

		// Increment tortoise by one step
		$tortoise = isset( $override[$tortoise] ) ? $override[$tortoise] : call_user_func_array( $callback, array_merge( array( $tortoise ), $callback_args ) );
	}

	return false;
}

/**
 * Send a HTTP header to limit rendering of pages to same origin iframes.
 *
 * @since 3.1.3
 *
 * @see https://developer.mozilla.org/en/the_x-frame-options_response_header
 */
function send_frame_options_header() {
	@header( 'X-Frame-Options: SAMEORIGIN' );
}

/**
 * Retrieve a list of protocols to allow in HTML attributes.
 *
 * @since 3.3.0
 * @since 4.3.0 Added 'webcal' to the protocols array.
 * @since 4.7.0 Added 'urn' to the protocols array.
 *
 * @see wp_kses()
 * @see esc_url()
 *
 * @staticvar array $protocols
 *
 * @return array Array of allowed protocols. Defaults to an array containing 'http', 'https',
 *               'ftp', 'ftps', 'mailto', 'news', 'irc', 'gopher', 'nntp', 'feed', 'telnet',
 *               'mms', 'rtsp', 'svn', 'tel', 'fax', 'xmpp', 'webcal', and 'urn'.
 */
function wp_allowed_protocols() {
	static $protocols = array();

	if ( empty( $protocols ) ) {
		$protocols = array( 'http', 'https', 'ftp', 'ftps', 'mailto', 'news', 'irc', 'gopher', 'nntp', 'feed', 'telnet', 'mms', 'rtsp', 'svn', 'tel', 'fax', 'xmpp', 'webcal', 'urn' );

		/**
		 * Filters the list of protocols allowed in HTML attributes.
		 *
		 * @since 3.0.0
		 *
		 * @param array $protocols Array of allowed protocols e.g. 'http', 'ftp', 'tel', and more.
		 */
		$protocols = apply_filters( 'kses_allowed_protocols', $protocols );
	}

	return $protocols;
}

/**
 * Return a comma-separated string of functions that have been called to get
 * to the current point in code.
 *
 * @since 3.4.0
 *
 * @see https://core.trac.wordpress.org/ticket/19589
 *
 * @param string $ignore_class Optional. A class to ignore all function calls within - useful
 *                             when you want to just give info about the callee. Default null.
 * @param int    $skip_frames  Optional. A number of stack frames to skip - useful for unwinding
 *                             back to the source of the issue. Default 0.
 * @param bool   $pretty       Optional. Whether or not you want a comma separated string or raw
 *                             array returned. Default true.
 * @return string|array Either a string containing a reversed comma separated trace or an array
 *                      of individual calls.
 */
function wp_debug_backtrace_summary( $ignore_class = null, $skip_frames = 0, $pretty = true ) {
	if ( version_compare( PHP_VERSION, '5.2.5', '>=' ) )
		$trace = debug_backtrace( false );
	else
		$trace = debug_backtrace();

	$caller = array();
	$check_class = ! is_null( $ignore_class );
	$skip_frames++; // skip this function

	foreach ( $trace as $call ) {
		if ( $skip_frames > 0 ) {
			$skip_frames--;
		} elseif ( isset( $call['class'] ) ) {
			if ( $check_class && $ignore_class == $call['class'] )
				continue; // Filter out calls

			$caller[] = "{$call['class']}{$call['type']}{$call['function']}";
		} else {
			if ( in_array( $call['function'], array( 'do_action', 'apply_filters' ) ) ) {
				$caller[] = "{$call['function']}('{$call['args'][0]}')";
			} elseif ( in_array( $call['function'], array( 'include', 'include_once', 'require', 'require_once' ) ) ) {
				$caller[] = $call['function'] . "('" . str_replace( array( WP_CONTENT_DIR, ABSPATH ) , '', $call['args'][0] ) . "')";
			} else {
				$caller[] = $call['function'];
			}
		}
	}
	if ( $pretty )
		return join( ', ', array_reverse( $caller ) );
	else
		return $caller;
}

/**
 * Retrieve ids that are not already present in the cache.
 *
 * @since 3.4.0
 * @access private
 *
 * @param array  $object_ids ID list.
 * @param string $cache_key  The cache bucket to check against.
 *
 * @return array List of ids not present in the cache.
 */
function _get_non_cached_ids( $object_ids, $cache_key ) {
	$clean = array();
	foreach ( $object_ids as $id ) {
		$id = (int) $id;
		if ( !wp_cache_get( $id, $cache_key ) ) {
			$clean[] = $id;
		}
	}

	return $clean;
}

/**
 * Test if the current device has the capability to upload files.
 *
 * @since 3.4.0
 * @access private
 *
 * @return bool Whether the device is able to upload files.
 */
function _device_can_upload() {
	if ( ! wp_is_mobile() )
		return true;

	$ua = $_SERVER['HTTP_USER_AGENT'];

	if ( strpos($ua, 'iPhone') !== false
		|| strpos($ua, 'iPad') !== false
		|| strpos($ua, 'iPod') !== false ) {
			return preg_match( '#OS ([\d_]+) like Mac OS X#', $ua, $version ) && version_compare( $version[1], '6', '>=' );
	}

	return true;
}

/**
 * Test if a given path is a stream URL
 *
 * @param string $path The resource path or URL.
 * @return bool True if the path is a stream URL.
 */
function wp_is_stream( $path ) {
	$wrappers = stream_get_wrappers();
	$wrappers_re = '(' . join('|', $wrappers) . ')';

	return preg_match( "!^$wrappers_re://!", $path ) === 1;
}

/**
 * Test if the supplied date is valid for the Gregorian calendar.
 *
 * @since 3.5.0
 *
 * @see checkdate()
 *
 * @param  int    $month       Month number.
 * @param  int    $day         Day number.
 * @param  int    $year        Year number.
 * @param  string $source_date The date to filter.
 * @return bool True if valid date, false if not valid date.
 */
function wp_checkdate( $month, $day, $year, $source_date ) {
	/**
	 * Filters whether the given date is valid for the Gregorian calendar.
	 *
	 * @since 3.5.0
	 *
	 * @param bool   $checkdate   Whether the given date is valid.
	 * @param string $source_date Date to check.
	 */
	return apply_filters( 'wp_checkdate', checkdate( $month, $day, $year ), $source_date );
}

/**
 * Load the auth check for monitoring whether the user is still logged in.
 *
 * Can be disabled with remove_action( 'admin_enqueue_scripts', 'wp_auth_check_load' );
 *
 * This is disabled for certain screens where a login screen could cause an
 * inconvenient interruption. A filter called {@see 'wp_auth_check_load'} can be used
 * for fine-grained control.
 *
 * @since 3.6.0
 */
function wp_auth_check_load() {
	if ( ! is_admin() && ! is_user_logged_in() )
		return;

	if ( defined( 'IFRAME_REQUEST' ) )
		return;

	$screen = get_current_screen();
	$hidden = array( 'update', 'update-network', 'update-core', 'update-core-network', 'upgrade', 'upgrade-network', 'network' );
	$show = ! in_array( $screen->id, $hidden );

	/**
	 * Filters whether to load the authentication check.
	 *
	 * Passing a falsey value to the filter will effectively short-circuit
	 * loading the authentication check.
	 *
	 * @since 3.6.0
	 *
	 * @param bool      $show   Whether to load the authentication check.
	 * @param WP_Screen $screen The current screen object.
	 */
	if ( apply_filters( 'wp_auth_check_load', $show, $screen ) ) {
		wp_enqueue_style( 'wp-auth-check' );
		wp_enqueue_script( 'wp-auth-check' );

		add_action( 'admin_print_footer_scripts', 'wp_auth_check_html', 5 );
		add_action( 'wp_print_footer_scripts', 'wp_auth_check_html', 5 );
	}
}

/**
 * Output the HTML that shows the wp-login dialog when the user is no longer logged in.
 *
 * @since 3.6.0
 */
function wp_auth_check_html() {
	$login_url = wp_login_url();
	$current_domain = ( is_ssl() ? 'https://' : 'http://' ) . $_SERVER['HTTP_HOST'];
	$same_domain = ( strpos( $login_url, $current_domain ) === 0 );

	/**
	 * Filters whether the authentication check originated at the same domain.
	 *
	 * @since 3.6.0
	 *
	 * @param bool $same_domain Whether the authentication check originated at the same domain.
	 */
	$same_domain = apply_filters( 'wp_auth_check_same_domain', $same_domain );
	$wrap_class = $same_domain ? 'hidden' : 'hidden fallback';

	?>
	<div id="wp-auth-check-wrap" class="<?php echo $wrap_class; ?>">
	<div id="wp-auth-check-bg"></div>
	<div id="wp-auth-check">
	<button type="button" class="wp-auth-check-close button-link"><span class="screen-reader-text"><?php _e( 'Close dialog' ); ?></span></button>
	<?php

	if ( $same_domain ) {
		?>
		<div id="wp-auth-check-form" class="loading" data-src="<?php echo esc_url( add_query_arg( array( 'interim-login' => 1 ), $login_url ) ); ?>"></div>
		<?php
	}

	?>
	<div class="wp-auth-fallback">
		<p><b class="wp-auth-fallback-expired" tabindex="0"><?php _e('Session expired'); ?></b></p>
		<p><a href="<?php echo esc_url( $login_url ); ?>" target="_blank"><?php _e('Please log in again.'); ?></a>
		<?php _e('The login page will open in a new window. After logging in you can close it and return to this page.'); ?></p>
	</div>
	</div>
	</div>
	<?php
}

/**
 * Check whether a user is still logged in, for the heartbeat.
 *
 * Send a result that shows a log-in box if the user is no longer logged in,
 * or if their cookie is within the grace period.
 *
 * @since 3.6.0
 *
 * @global int $login_grace_period
 *
 * @param array $response  The Heartbeat response.
 * @return array $response The Heartbeat response with 'wp-auth-check' value set.
 */
function wp_auth_check( $response ) {
	$response['wp-auth-check'] = is_user_logged_in() && empty( $GLOBALS['login_grace_period'] );
	return $response;
}

/**
 * Return RegEx body to liberally match an opening HTML tag.
 *
 * Matches an opening HTML tag that:
 * 1. Is self-closing or
 * 2. Has no body but has a closing tag of the same name or
 * 3. Contains a body and a closing tag of the same name
 *
 * Note: this RegEx does not balance inner tags and does not attempt
 * to produce valid HTML
 *
 * @since 3.6.0
 *
 * @param string $tag An HTML tag name. Example: 'video'.
 * @return string Tag RegEx.
 */
function get_tag_regex( $tag ) {
	if ( empty( $tag ) )
		return;
	return sprintf( '<%1$s[^<]*(?:>[\s\S]*<\/%1$s>|\s*\/>)', tag_escape( $tag ) );
}

/**
 * Retrieve a canonical form of the provided charset appropriate for passing to PHP
 * functions such as htmlspecialchars() and charset html attributes.
 *
 * @since 3.6.0
 * @access private
 *
 * @see https://core.trac.wordpress.org/ticket/23688
 *
 * @param string $charset A charset name.
 * @return string The canonical form of the charset.
 */
function _canonical_charset( $charset ) {
	if ( 'utf-8' === strtolower( $charset ) || 'utf8' === strtolower( $charset) ) {

		return 'UTF-8';
	}

	if ( 'iso-8859-1' === strtolower( $charset ) || 'iso8859-1' === strtolower( $charset ) ) {

		return 'ISO-8859-1';
	}

	return $charset;
}

/**
 * Set the mbstring internal encoding to a binary safe encoding when func_overload
 * is enabled.
 *
 * When mbstring.func_overload is in use for multi-byte encodings, the results from
 * strlen() and similar functions respect the utf8 characters, causing binary data
 * to return incorrect lengths.
 *
 * This function overrides the mbstring encoding to a binary-safe encoding, and
 * resets it to the users expected encoding afterwards through the
 * `reset_mbstring_encoding` function.
 *
 * It is safe to recursively call this function, however each
 * `mbstring_binary_safe_encoding()` call must be followed up with an equal number
 * of `reset_mbstring_encoding()` calls.
 *
 * @since 3.7.0
 *
 * @see reset_mbstring_encoding()
 *
 * @staticvar array $encodings
 * @staticvar bool  $overloaded
 *
 * @param bool $reset Optional. Whether to reset the encoding back to a previously-set encoding.
 *                    Default false.
 */
function mbstring_binary_safe_encoding( $reset = false ) {
	static $encodings = array();
	static $overloaded = null;

	if ( is_null( $overloaded ) )
		$overloaded = function_exists( 'mb_internal_encoding' ) && ( ini_get( 'mbstring.func_overload' ) & 2 );

	if ( false === $overloaded )
		return;

	if ( ! $reset ) {
		$encoding = mb_internal_encoding();
		array_push( $encodings, $encoding );
		mb_internal_encoding( 'ISO-8859-1' );
	}

	if ( $reset && $encodings ) {
		$encoding = array_pop( $encodings );
		mb_internal_encoding( $encoding );
	}
}

/**
 * Reset the mbstring internal encoding to a users previously set encoding.
 *
 * @see mbstring_binary_safe_encoding()
 *
 * @since 3.7.0
 */
function reset_mbstring_encoding() {
	mbstring_binary_safe_encoding( true );
}

/**
 * Filter/validate a variable as a boolean.
 *
 * Alternative to `filter_var( $var, FILTER_VALIDATE_BOOLEAN )`.
 *
 * @since 4.0.0
 *
 * @param mixed $var Boolean value to validate.
 * @return bool Whether the value is validated.
 */
function wp_validate_boolean( $var ) {
	if ( is_bool( $var ) ) {
		return $var;
	}

	if ( is_string( $var ) && 'false' === strtolower( $var ) ) {
		return false;
	}

	return (bool) $var;
}

/**
 * Delete a file
 *
 * @since 4.2.0
 *
 * @param string $file The path to the file to delete.
 */
function wp_delete_file( $file ) {
	/**
	 * Filters the path of the file to delete.
	 *
	 * @since 2.1.0
	 *
	 * @param string $medium Path to the file to delete.
	 */
	$delete = apply_filters( 'wp_delete_file', $file );
	if ( ! empty( $delete ) ) {
		@unlink( $delete );
	}
}

/**
 * Deletes a file if its path is within the given directory.
 *
 * @since 4.9.7
 *
 * @param string $file      Absolute path to the file to delete.
 * @param string $directory Absolute path to a directory.
 * @return bool True on success, false on failure.
 */
function wp_delete_file_from_directory( $file, $directory ) {
	$real_file = realpath( wp_normalize_path( $file ) );
	$real_directory = realpath( wp_normalize_path( $directory ) );

	if ( false === $real_file || false === $real_directory || strpos( wp_normalize_path( $real_file ), trailingslashit( wp_normalize_path( $real_directory ) ) ) !== 0 ) {
		return false;
	}

	wp_delete_file( $file );

	return true;
}

/**
 * Outputs a small JS snippet on preview tabs/windows to remove `window.name` on unload.
 *
 * This prevents reusing the same tab for a preview when the user has navigated away.
 *
 * @since 4.3.0
 */
function wp_post_preview_js() {
	global $post;

	if ( ! is_preview() || empty( $post ) ) {
		return;
	}

	// Has to match the window name used in post_submit_meta_box()
	$name = 'wp-preview-' . (int) $post->ID;

	?>
	<script>
	( function() {
		var query = document.location.search;

		if ( query && query.indexOf( 'preview=true' ) !== -1 ) {
			window.name = '<?php echo $name; ?>';
		}

		if ( window.addEventListener ) {
			window.addEventListener( 'unload', function() { window.name = ''; }, false );
		}
	}());
	</script>
	<?php
}

/**
 * Parses and formats a MySQL datetime (Y-m-d H:i:s) for ISO8601/RFC3339.
 *
 * Explicitly strips timezones, as datetimes are not saved with any timezone
 * information. Including any information on the offset could be misleading.
 *
 * @since 4.4.0
 *
 * @param string $date_string Date string to parse and format.
 * @return string Date formatted for ISO8601/RFC3339.
 */
function mysql_to_rfc3339( $date_string ) {
	$formatted = mysql2date( 'c', $date_string, false );

	// Strip timezone information
	return preg_replace( '/(?:Z|[+-]\d{2}(?::\d{2})?)$/', '', $formatted );
}

/**
 * Attempts to raise the PHP memory limit for memory intensive processes.
 *
 * Only allows raising the existing limit and prevents lowering it.
 *
 * @since 4.6.0
 *
 * @param string $context Optional. Context in which the function is called. Accepts either 'admin',
 *                        'image', or an arbitrary other context. If an arbitrary context is passed,
 *                        the similarly arbitrary {@see '{$context}_memory_limit'} filter will be
 *                        invoked. Default 'admin'.
 * @return bool|int|string The limit that was set or false on failure.
 */
function wp_raise_memory_limit( $context = 'admin' ) {
	// Exit early if the limit cannot be changed.
	if ( false === wp_is_ini_value_changeable( 'memory_limit' ) ) {
		return false;
	}

	$current_limit     = @ini_get( 'memory_limit' );
	$current_limit_int = wp_convert_hr_to_bytes( $current_limit );

	if ( -1 === $current_limit_int ) {
		return false;
	}

	$wp_max_limit     = WP_MAX_MEMORY_LIMIT;
	$wp_max_limit_int = wp_convert_hr_to_bytes( $wp_max_limit );
	$filtered_limit   = $wp_max_limit;

	switch ( $context ) {
		case 'admin':
			/**
			 * Filters the maximum memory limit available for administration screens.
			 *
			 * This only applies to administrators, who may require more memory for tasks
			 * like updates. Memory limits when processing images (uploaded or edited by
			 * users of any role) are handled separately.
			 *
			 * The `WP_MAX_MEMORY_LIMIT` constant specifically defines the maximum memory
			 * limit available when in the administration back end. The default is 256M
			 * (256 megabytes of memory) or the original `memory_limit` php.ini value if
			 * this is higher.
			 *
			 * @since 3.0.0
			 * @since 4.6.0 The default now takes the original `memory_limit` into account.
			 *
			 * @param int|string $filtered_limit The maximum WordPress memory limit. Accepts an integer
			 *                                   (bytes), or a shorthand string notation, such as '256M'.
			 */
			$filtered_limit = apply_filters( 'admin_memory_limit', $filtered_limit );
			break;

		case 'image':
			/**
			 * Filters the memory limit allocated for image manipulation.
			 *
			 * @since 3.5.0
			 * @since 4.6.0 The default now takes the original `memory_limit` into account.
			 *
			 * @param int|string $filtered_limit Maximum memory limit to allocate for images.
			 *                                   Default `WP_MAX_MEMORY_LIMIT` or the original
			 *                                   php.ini `memory_limit`, whichever is higher.
			 *                                   Accepts an integer (bytes), or a shorthand string
			 *                                   notation, such as '256M'.
			 */
			$filtered_limit = apply_filters( 'image_memory_limit', $filtered_limit );
			break;

		default:
			/**
			 * Filters the memory limit allocated for arbitrary contexts.
			 *
			 * The dynamic portion of the hook name, `$context`, refers to an arbitrary
			 * context passed on calling the function. This allows for plugins to define
			 * their own contexts for raising the memory limit.
			 *
			 * @since 4.6.0
			 *
			 * @param int|string $filtered_limit Maximum memory limit to allocate for images.
			 *                                   Default '256M' or the original php.ini `memory_limit`,
			 *                                   whichever is higher. Accepts an integer (bytes), or a
			 *                                   shorthand string notation, such as '256M'.
			 */
			$filtered_limit = apply_filters( "{$context}_memory_limit", $filtered_limit );
			break;
	}

	$filtered_limit_int = wp_convert_hr_to_bytes( $filtered_limit );

	if ( -1 === $filtered_limit_int || ( $filtered_limit_int > $wp_max_limit_int && $filtered_limit_int > $current_limit_int ) ) {
		if ( false !== @ini_set( 'memory_limit', $filtered_limit ) ) {
			return $filtered_limit;
		} else {
			return false;
		}
	} elseif ( -1 === $wp_max_limit_int || $wp_max_limit_int > $current_limit_int ) {
		if ( false !== @ini_set( 'memory_limit', $wp_max_limit ) ) {
			return $wp_max_limit;
		} else {
			return false;
		}
	}

	return false;
}

/**
 * Generate a random UUID (version 4).
 *
 * @since 4.7.0
 *
 * @return string UUID.
 */
function wp_generate_uuid4() {
	return sprintf( '%04x%04x-%04x-%04x-%04x-%04x%04x%04x',
		mt_rand( 0, 0xffff ), mt_rand( 0, 0xffff ),
		mt_rand( 0, 0xffff ),
		mt_rand( 0, 0x0fff ) | 0x4000,
		mt_rand( 0, 0x3fff ) | 0x8000,
		mt_rand( 0, 0xffff ), mt_rand( 0, 0xffff ), mt_rand( 0, 0xffff )
	);
}

/**
 * Get last changed date for the specified cache group.
 *
 * @since 4.7.0
 *
 * @param $group Where the cache contents are grouped.
 *
 * @return string $last_changed UNIX timestamp with microseconds representing when the group was last changed.
 */
function wp_cache_get_last_changed( $group ) {
	$last_changed = wp_cache_get( 'last_changed', $group );

	if ( ! $last_changed ) {
		$last_changed = microtime();
		wp_cache_set( 'last_changed', $last_changed, $group );
	}

	return $last_changed;
}

B Ge Team File Manager Version 1.0, Coded By Little Wei
Email: null